Wheels - What is legal?

[tibsy92]

Originally Posted by click_lenny

Pic pls tibsy!!!

[sirus]

Wow... so in WA you can't legally go above 18x7 rims?! What a bunch of wankers.

[coyote]

Originally Posted by Nafe

whya re you assuming the 8.5 +25 and 9 +30 will stick out alot??

That's irrelevant in a thread about legality, because neither of those options are even close to legal.

I bought my first WRX in 1994 and enjoyed a few years of worry free motoring before they became popular with the exact demographic this car is being marketed at (the Silvia demographic).

These cars will be cop magnets ... and probably rightly so.

[Panman]

I'm putting 18x7.5 by +45 with 225/40 federal 595 rs-r on mine easy, legal, and won't upset the handling balance.

[Nafe]

Originally Posted by coyote

That's irrelevant in a thread about legality, because neither of those options are even close to legal.

If you feel it isn’t relevant, why did you mention it originally?? Seems counter productive.

With regards to legalities of the track, I guess it’s lucky it isn’t your car, huh?

[nzer]

Originally Posted by Panman

I'm putting 18x7.5 by +45 with 225/40 federal 595 rs-r on mine easy, legal, and won't upset the handling balance.

This is what I'm looking at too.

The Toyota supplied TRD wheels are 18 x 7.5 with 225/40 Michelen Pilot Super Sport tyres on them so I'm comfortable that it'll be legal and handling will be ok. Problem is the TRD wheels are about four times the price of after market wheels so definitely won't be using the actual TRD wheels.

And, as the TRD version here doesn't have the TRD coilovers (they are an extra) I assume all with fit on the stock setup.

Might look at 18 x 8 but only if will work and handle with stock setup without long-term issues. Don;t know much about wheels so will need to research or get advice on that.

[Nafe]

Originally Posted by Panman

I'm putting 18x7.5 by +45 with 225/40 federal 595 rs-r on mine easy, legal, and won't upset the handling balance.

If you want to be *REALLY* picky like some on here, technically that isn’t legal either. That will increase your track by 28.15mm, which is 2.15mm over legal :P
I am assuming, that like me, you don’t care too much about a slight track increase though

[Panman]

Originally Posted by nzer

This is what I'm looking at too.

The Toyota supplied TRD wheels are 18 x 7.5 with 225/40 Michelen Pilot Super Sport tyres on them so I'm comfortable that it'll be legal and handling will be ok. Problem is the TRD wheels are about four times the price of after market wheels so definitely won't be using the actual TRD wheels.

And, as the TRD version here doesn't have the TRD coilovers (they are an extra) I assume all with fit on the stock setup.

Might look at 18 x 8 but only if will work and handle with stock setup without long-term issues. Don;t know much about wheels so will need to research or get advice on that.

Either Work Emotion CR-Kai 18x7.5 or Enkei PF01 come in the rights sizes and offsets. Weight is the enemy with this stuff. Both of those options are quite good weight wise vs. OE

[coyote]

Originally Posted by Nafe

If you want to be *REALLY* picky like some on here, technically that isn’t legal either. That will increase your track by 28.15mm, which is 2.15mm over legal :P
I am assuming, that like me, you don’t care too much about a slight track increase though

I know you have a bee in your bonnet because I didn't want to listen to your dealership cheer-leading, but you have once again made a statement that is completely incorrect and misleading.

Panman, your example only increases track by 6mm and is perfectly legal.

[Panman]

Originally Posted by Nafe

If you want to be *REALLY* picky like some on here, technically that isn’t legal either. That will increase your track by 28.15mm, which is 2.15mm over legal :P
I am assuming, that like me, you don’t care too much about a slight track increase though

Track increase is to the centre of the tyre - because I'm going at the +45 or at worst +48 offset (same as std) so increase in track will be around 6mm.

[Nafe]

Originally Posted by coyote

I know you have a bee in your bonnet because I didn't want to listen to your dealership cheer-leading, but you have once again made a statement that is completely incorrect and misleading.

Panman, your example only increases track by 6mm and is perfectly legal.

I don’t have a bee in my bonnet about anything, mate. I just get annoyed when people post retarded shit, act like fuckwits, think they are better than everyone and point fingers where there is no need to. If you want to bring up the alleged “dealership cheer leading” or whatever the fuck you want to call it, I suggest you actually read the whole thread, then get back to me. I did no such thing, and made ONE post about ONE good experience... hardly what you’re accusing me of... If a number of people are bagging out a place, how is it “cheer leading” if one person makes one comment about a good experience?
I don’t know what you’re fuckin problem is with me though?? I couldn’t care less if you listen to me or not Don’t flatter yourself.

I am not sure where you got your track calculation from, but I typed in all of the information into a track calculator and it worked it out. It says there is a track increase of 1.126in. Do they maths. 1in = close enough to 25mm. Now all you do next is multiply 25 x 1.126, and let me know the result

What do you mean I have “once again made a statement that is completely incorrect and misleading”?? That’s a rude implication there, and you are guilty of providing incorrect/misleading info as well mate...

[Nafe]

Originally Posted by Panman

Track increase is to the centre of the tyre - because I'm going at the +45 or at worst +48 offset (same as std) so increase in track will be around 6mm.

I know what track is and where it is measured from
Here is the detailed calculator I sued
http://gti-vr6.net/library/engine/Sc...ldiameters.htm
I didn't write the software, just entered the details

[coyote]

Originally Posted by Nafe

I don’t have a bee in my bonnet about anything, mate. I just get annoyed when people post retarded shit, act like fuckwits, think they are better than everyone and point fingers where there is no need to. If you want to bring up the alleged “dealership cheer leading” or whatever the fuck you want to call it, I suggest you actually read the whole thread, then get back to me. I did no such thing, and made ONE post about ONE good experience... hardly what you’re accusing me of... If a number of people are bagging out a place, how is it “cheer leading” if one person makes one comment about a good experience?
I don’t know what you’re fuckin problem is with me though?? I couldn’t care less if you listen to me or not Don’t flatter yourself.

I am not sure where you got your track calculation from, but I typed in all of the information into a track calculator and it worked it out. It says there is a track increase of 1.126in. Do they maths. 1in = close enough to 25mm. Now all you do next is multiply 25 x 1.126, and let me know the result

What do you mean I have “once again made a statement that is completely incorrect and misleading”?? That’s a rude implication there, and you are guilty of providing incorrect/misleading info as well mate...

Originally Posted by Nafe

I know what track is and where it is measured from
Here is the detailed calculator I sued
http://gti-vr6.net/library/engine/Sc...ldiameters.htm
I didn't write the software, just entered the details

Take a tablet and lie down, then go see your doctor and ask him to remove that bee.

[Nafe]

Originally Posted by coyote

Take a tablet and lie down, then go see your doctor and ask him to remove that bee.

I see you're happy to dish out shit/accusations, but never seem to back them up.