Supermassive track car part-out - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

D K · 03-22-2018, 09:10 PM

Yep. This is fianally happening.

Im sure a lot of people on here know this car, so it goes without saying that everything listed is unique, bespoke, one of a kind, top notch quality, track ready equipment.

First off is Jackson Racing C38 setup that was used to prototype the setup for JR. This is the first C38 for the 86.
This is a variable boost, hand made custom setup. The intercooler alone cost over 1500 to make.
Im looking for $5500 or best offer

Next up is a splitter, splitter mount, radiator mount, intercooler mount, tube front bumper, oil cooler(s) mount, ducting for the radiator.
The splitter sits out about 6” in front of the bumper and supports well over 150 pounds without the gay boy, wannabe racer splitter rods that ruin your aerodynamics
Looking for $1800 for this setup

Front bumper. Gray. Nothing broken. Has part of the grille blocked off for better airflow.
$300

Stock headlights.
$250

Have many, many other parts.

Kaaz diff. Complete. 4.56 gears. Custom cam for 1.5 way. This locks up harder and sooner than the cam that comes with it normally. Works MUCH better than the normal setup. . $900

Cusco diff. 4.875 (800). Custom pro setup (2000). Blue finned cover (800). $2000
This is a very nice setup where everything moves up a gear. Where you normally would use 2nd, now you use 3rd. Incredible acceleration.

Vented hood $300

Trunk lid with custom wing mounts for GT1000 (or wing of your choice) $600

Stock seats $300

3 way coilovers made by HVT/Inertia Lab. Custom, high end race coilovers. Dont even know what to ask for these? $6000? Probably too high for all sakes and purposes, so how about $3500?
Also have a Tremec T56 Magnum XL that is a BOLT ON situation from engine to the diff.
This means that you take T56 Magnum XL and you bolt it to an FA20, use the stock throw out bearing and have a drive shaft that connects to your stock diff.
The shifter lines up perfectly btw. I have over $11000 invested in this arrangement.
$5000 and that includes custom Liberty Transmissions gears

Custom ACE header. Biggest primeries you can get in this configuration.
This header was custom made for me and its the only one like it in the world.
This will ONLY work on a supercharged engine as no NA in the world could bother this header.
EASILY handles 600hp. Ask me how I know

$900

I have many, many more items for sale.

Everything is located in SoCal and consideration will be given to those who are LOCAL.

Not looking to ship anything bulky or heavy.
Smaller items ok, you pay for the ride.

Lightened · 03-23-2018, 01:46 AM

That must have been one wild ride... (taking notes)

Stryyker · 03-23-2018, 04:53 AM

Im sorry are your wheels for sale

I want first dibs if they are

D K · 03-23-2018, 12:37 PM

Everything is for sale!

However the TC105’s are gone. I have 2 sets of the gold wheels you see in some pics.

DarkSideFRS · 03-23-2018, 12:52 PM

what sway bar is that? and where in socal?

D K · 03-23-2018, 01:34 PM

I believe thats an eibach.
I am in long beach.

Quote:

Originally Posted by DarkSideFRS

what sway bar is that? and where in socal?

finch1750 · 03-23-2018, 11:14 PM

Pics of vented hood?

Stryyker · 03-24-2018, 12:47 AM

I dont see any pictures of the gold wheels

D K · 03-24-2018, 01:16 PM

Quote:

Originally Posted by Stryyker

I dont see any pictures of the gold wheels

Thats because I assumed you could read my mind. Oops.

D K · 03-24-2018, 01:18 PM

Quote:

Originally Posted by finch1750

Pics of vented hood?

Not the best pic, but you get the idea.

z

Kurisu · 03-24-2018, 04:10 PM

Can I get better pictures of vented hood.

pgranberg11 · 03-26-2018, 12:47 PM

wow. that is one crazy track build, but pretty awesome!! glws!!

supahotfya_86 · 03-26-2018, 04:34 PM

so much want for the trans setup

FT86Logic · 03-27-2018, 11:17 PM

Do you have a build thread? What were you pushing with the Jackson Racing C38 setup? 600hp(didn't know if thats what you meant by the comment on the headers)?

03-22-2018, 09:10 PM	#1
D K Stig's dark passenger Join Date: Dec 2013 Drives: FR-S Location: I work abroad Posts: 724 Thanks: 60 Thanked 316 Times in 186 Posts Mentioned: 20 Post(s) Tagged: 1 Thread(s)	Supermassive track car part-out Yep. This is fianally happening. Im sure a lot of people on here know this car, so it goes without saying that everything listed is unique, bespoke, one of a kind, top notch quality, track ready equipment. First off is Jackson Racing C38 setup that was used to prototype the setup for JR. This is the first C38 for the 86. This is a variable boost, hand made custom setup. The intercooler alone cost over 1500 to make. Im looking for $5500 or best offer Next up is a splitter, splitter mount, radiator mount, intercooler mount, tube front bumper, oil cooler(s) mount, ducting for the radiator. The splitter sits out about 6” in front of the bumper and supports well over 150 pounds without the gay boy, wannabe racer splitter rods that ruin your aerodynamics Looking for $1800 for this setup Front bumper. Gray. Nothing broken. Has part of the grille blocked off for better airflow. $300 Stock headlights. $250 Have many, many other parts. Kaaz diff. Complete. 4.56 gears. Custom cam for 1.5 way. This locks up harder and sooner than the cam that comes with it normally. Works MUCH better than the normal setup. . $900 Cusco diff. 4.875 (800). Custom pro setup (2000). Blue finned cover (800). $2000 This is a very nice setup where everything moves up a gear. Where you normally would use 2nd, now you use 3rd. Incredible acceleration. Vented hood $300 Trunk lid with custom wing mounts for GT1000 (or wing of your choice) $600 Stock seats $300 3 way coilovers made by HVT/Inertia Lab. Custom, high end race coilovers. Dont even know what to ask for these? $6000? Probably too high for all sakes and purposes, so how about $3500? Also have a Tremec T56 Magnum XL that is a BOLT ON situation from engine to the diff. This means that you take T56 Magnum XL and you bolt it to an FA20, use the stock throw out bearing and have a drive shaft that connects to your stock diff. The shifter lines up perfectly btw. I have over $11000 invested in this arrangement. $5000 and that includes custom Liberty Transmissions gears Custom ACE header. Biggest primeries you can get in this configuration. This header was custom made for me and its the only one like it in the world. This will ONLY work on a supercharged engine as no NA in the world could bother this header. EASILY handles 600hp. Ask me how I know $900 I have many, many more items for sale. Everything is located in SoCal and consideration will be given to those who are LOCAL. Not looking to ship anything bulky or heavy. Smaller items ok, you pay for the ride. Last edited by D K; 04-11-2018 at 03:24 PM.

03-23-2018, 11:14 PM	#7
finch1750 Undisputed El Presidente Join Date: Jun 2012 Drives: Zenki 37J ZN6 Location: Stockton, CA Posts: 11,593 Thanks: 9,403 Thanked 9,411 Times in 5,270 Posts Mentioned: 374 Post(s) Tagged: 33 Thread(s)	Pics of vented hood? __________________ "Just like how a strut bar somehow enables you to corner 20MPH faster around a cloverleaf on-ramp, when the reality is, you can do it already but you just don't have to balls to do it." - CSG David

03-26-2018, 12:47 PM	#12
pgranberg11 BoostedBRZ Join Date: Mar 2014 Drives: Turbo BRZ Location: IL Posts: 689 Thanks: 171 Thanked 259 Times in 191 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	wow. that is one crazy track build, but pretty awesome!! glws!! __________________ Build Thread/Picture Dump Insta: pete.lete

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Part Diagrams / Numbers for BRZ (like RealOEM for bmw), Part Vendors	vlad128	BRZ First-Gen (2012+) — General Topics	7	06-29-2018 05:05 PM
FS: PART OUT Complete OEM Audio Plus Sound Solution & More! PART OUT	dinoniel	Audio/Visual, Electronics, Infotainment, NAV	15	06-04-2017 04:27 PM
S2000 vs. FR-S BRZ Track Review Video \| Part 2 of 2	Dezoris	Scion FR-S / Toyota 86 GT86 General Forum	121	02-01-2016 07:57 AM
Whiteout FR-S by Supermassive	Supermassive	Member's Car Journals	151	07-30-2015 01:22 PM
Vortech Finale Review Video \| Track Testing \| Part 4 of 4	Dezoris	Forced Induction	75	04-12-2014 01:45 PM

03-23-2018, 01:46 AM	#2
Lightened Every Ounce Counts Join Date: Jul 2015 Drives: 86 Location: Earth Posts: 214 Thanks: 165 Thanked 206 Times in 90 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	That must have been one wild ride... (taking notes)

03-23-2018, 04:53 AM	#3
Stryyker Member Join Date: May 2016 Drives: 2016 Halo FRS Location: Los Angeles, California Posts: 69 Thanks: 1 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Im sorry are your wheels for sale I want first dibs if they are

03-23-2018, 12:37 PM	#4
D K Stig's dark passenger Join Date: Dec 2013 Drives: FR-S Location: I work abroad Posts: 724 Thanks: 60 Thanked 316 Times in 186 Posts Mentioned: 20 Post(s) Tagged: 1 Thread(s)	Everything is for sale! However the TC105’s are gone. I have 2 sets of the gold wheels you see in some pics.

03-23-2018, 12:52 PM	#5
DarkSideFRS Banned Join Date: Apr 2017 Drives: 2013 pearl white FR-S Location: Socal Posts: 536 Thanks: 39 Thanked 191 Times in 124 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	what sway bar is that? and where in socal?

03-24-2018, 12:47 AM	#8
Stryyker Member Join Date: May 2016 Drives: 2016 Halo FRS Location: Los Angeles, California Posts: 69 Thanks: 1 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I dont see any pictures of the gold wheels

03-24-2018, 04:10 PM	#11
Kurisu Member Join Date: Apr 2017 Drives: 2015 Firestorm FRS Location: Torrance, CA Posts: 42 Thanks: 4 Thanked 5 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Can I get better pictures of vented hood.

03-26-2018, 04:34 PM	#13
supahotfya_86 Member Join Date: Jul 2015 Drives: Firestorm FR-S Location: Houston Posts: 40 Thanks: 8 Thanked 25 Times in 11 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	so much want for the trans setup

03-27-2018, 11:17 PM	#14
FT86Logic Banned Join Date: Jan 2018 Drives: 14 Dark BRZ Ltd Location: Funky Town Tx Posts: 63 Thanks: 0 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Do you have a build thread? What were you pushing with the Jackson Racing C38 setup? 600hp(didn't know if thats what you meant by the comment on the headers)?

User Name		Remember Me?
Password