ACE A-350 Header - Merry Christmas to me!

[Dr. BRZ]

Originally Posted by 86_IT

Haven't tuned or dyno'd yet. I'll be getting tuned next month.

alright ill be waiting, i am also NA and i am completely all tomei with EL and i make 205whp.

[justinco]

Originally Posted by nikitopo

Justin, I like your channel. Waiting for results.

Thanks! Coming soon hopefully. In fact, might install the header tomorrow. Been sick the past week and a half causing delays

[JermMX5]

Originally Posted by Dr. BRZ

alright ill be waiting, i am also NA and i am completely all tomei with EL and i make 205whp.

Woah thats pretty high for the Tomei EL I thought, what was your baseline? And is it tuned by delicious?

Also what year is your car?

I've got a 2017 and don't quite yet want to lay down money for the ACE, so if I can buy a header for half the money and still bump into the 200WHP range that'd be amazing, I baselined at 179 on a dynojet so it'll be tough

[CSG Mike]

Originally Posted by JermMX5

Woah thats pretty high for the Tomei EL I thought, what was your baseline? And is it tuned by delicious?

Also what year is your car?

I've got a 2017 and don't quite yet want to lay down money for the ACE, so if I can buy a header for half the money and still bump into the 200WHP range that'd be amazing, I baselined at 179 on a dynojet so it'll be tough

It's all relative. 179 baseline is VERY high, and you're looking for a 21whp gain (11.7%).

I baselined 165whp, and gained 30whp to 195 (18.2% gain) with my Ace header.

[vagthomas]

Originally Posted by CSG Mike

It's all relative. 179 baseline is VERY high, and you're looking for a 21whp gain (11.7%).

I baselined 165whp, and gained 30whp to 195 (18.2% gain) with my Ace header.

Mike, is this only with the Ace header (catless) or are there any other mods?

[CSG Mike]

Originally Posted by vagthomas

Mike, is this only with the Ace header (catless) or are there any other mods?

Ace header, DT ff kit, DT tune.

OFH lines are OFH3 + OFT + tune (fuels vary).

Zero other mods. OEM airbox, OEM front pipe, OEM exhaust. Both OFT/OFT and Ace/DT combos are on 2017 cars, with no other mods.

CSG can ship the Ace header internationally.

[strat61caster]

Originally Posted by CSG Mike

I baselined 165whp, and gained 30whp to 195 (18.2% gain) with my Ace header..

[nikitopo]

Originally Posted by vagthomas

Mike, is this only with the Ace header (catless) or are there any other mods?

Vag, these are American dynos. It is known to read higher. Stock car is also newer with many factory changes.

[CSG Mike]

Originally Posted by nikitopo

Vag, these are American dynos. It is known to read higher. Stock car is also newer with many factory changes.

I wasn't ware a 165 baseline was high.

[nikitopo]

Originally Posted by CSG Mike

I wasn't ware a 165 baseline was high.

Strange. I remember your 2017 car stock was giving higher numbers. Something around 175 whp baseline. Here is your post

http://www.ft86club.com/forums/showp...8&postcount=16

and result:




Is the 165 whp and the other results from a different car?

[Apex No.525300887039]

Not sure what a typical baseline on pump gas with that specific dyno is, but there is mention of VP101 being used

[CSG Mike]

Originally Posted by nikitopo

Strange. I remember your 2017 car stock was giving higher numbers. Something around 175 whp baseline. Here is your post

http://www.ft86club.com/forums/showp...8&postcount=16

and result:




Is the 165 whp and the other results from a different car?

That's a different dyno, specifically, a dynapack, that removes rolling resistances as well as wheel/tire inertia, and measures power at the hubs, not the wheels.

[nikitopo]

Originally Posted by Apex No.525300887039

Not sure what a typical baseline on pump gas with that specific dyno is, but there is mention of VP101 being used

VP101 doesn't make much difference in stock tune. They replied it was a different dyno.