Open Flash Tablet - OFT TIPS Trick’s & FAQ

[Boomerang]

Originally Posted by kowalski

Hi. I did some logs and I was going nuts not being able to monitor adv multiplier on OFT. Be it live or recorded, IAM stays "0" no matter what. Then FLKC goes from -100 up to 100 positive. Weigaldo have you sorted the IAM issue or has @shiv or anyone already came up with a fix for this?

Here are some logs that annoy me (ft86 catted header, 3 inches perrin exhaust, 93 octane 'probably 92' - premium gas in Mexico):

https://datazap.me/u/kowalski/stg1-9...&data=1-4-7-11

https://datazap.me/u/kowalski/stg-2-...ata=1-4-7-9-11 (here I have a +100 FLKC)

I have udpated the template as suggested, OpenFlashManager is up to date, I tried different tunes...91 and 93 octane. All of them show adv. multiplier = 0.

Stage 2 - 91 octane feels to run poor on low revs. Engine stalls more easily, slightly more oomph at higher revs. Stg 2 - 93 octane seems to run too rich and then engine seems to loose power at high revs. I am stuck here. Best comfort zone for me was to run Stg 1 - 93 octane. Now I am running stg 2 - 93 octane as a try out.

Any help or comment will be much appreciated.

It is a known issue with newer ROMs that they wont log IAM, FLKC with OFT..

There are work arounds if you do some research, or hit up Shiv for some customer service..

[kowalski]

Originally Posted by Boomerang

It is a known issue with newer ROMs that they wont log IAM, FLKC with OFT..

There are work arounds if you do some research, or hit up Shiv for some customer service..

I See...then I guess it's time to buy a OBD cable and start using rom raider. I Already emailed shiv, but if it is a known issue and it has not been oficialy fixed I guess rom raider is still a better option.

Enviat des del meu SM-N920G usant Tapatalk

[Weigaldo]

Originally Posted by kowalski

Hi. I did some logs and I was going nuts not being able to monitor adv multiplier on OFT. Be it live or recorded, IAM stays "0" no matter what. Then FLKC goes from -100 up to 100 positive. Weigaldo have you sorted the IAM issue or has @shiv or anyone already came up with a fix for this

I emailed Openflash and got a V3 that works correctly. My V2 still isn’t updating though (tried making a quiet cold start tune). I haven’t tried again though since 1.27 and I think my OFM updated to 1.29 since then.

[kowalski]

Originally Posted by Weigaldo

I emailed Openflash and got a V3 that works correctly. My V2 still isn’t updating though (tried making a quiet cold start tune). I haven’t tried again though since 1.27 and I think my OFM updated to 1.29 since then.

Do you mean a v3 beta tune? for stage 2 - UEL catted headers on 91 octane? Or another update? I also have the 1.29 flash manager. Openflash did send me a v3 tune for my header several months ago (thx), thing is I did not like it. It just felt weird on the car. I asked for a 93 octane tune but shiv said that this one was more aggressive than the previous v2 and that it should be ok. It might. But I'd rather stay at stage 1 - 93 octane. Though now I am testing on stg 2 - 93 UEL, as new official v3 releases seem to be an ongoing work-in-progress. That's why I started logging...and found this issue with IAM, FLKC, and so on. Perrin exhaust is quieter under stg 2 - 93 than it was under stg1 - 93, though. Perhaps I have to give it some time. I am planing to stay on stage 2 - 93 UEL v2 as long as I do not hear rattlings or wierd noises from the engine. If so, I'll get back to stage 1 - 93. And perhaps go the supercharged way and then ask for a specific ecutek tune o delicious package. But man...those FI options are quite expensive so... Stuck with the logs for the time being

[Northern_18]

I had the same issue with logging for my 2016 fr-s. Contacted open flash and they sent me the V3 tune for my car (I have stock exhaust so I'm running stg 1 for now) and now the logging works correctly. I believe Shiv mentioned he's hoping to release the V3 tunes around the holidays at the end of the year.

[Joeyb860]

Do I have to use my o2 sensors with my cat less uel 1320 header since I'm going to use my oft to turn off the cell for them any way?

[guybo]

yes you do

[Joeyb860]

So I just got my headers, over, pipe and front pipe installed but my oft does not have the 2017 flash and I emailed oft Monday but it takes a day to get a reply and each time it's one question one answer one day repeat. This sucks can anyone help. It sounds like I'm going to have to send it back to Amazon and re order it from oft directly if I understood the last email from oft correctly.

[My Key]

Originally Posted by Joeyb860

So I just got my headers, over, pipe and front pipe installed but my oft does not have the 2017 flash and I emailed oft Monday but it takes a day to get a reply and each time it's one question one answer one day repeat. This sucks can anyone help. It sounds like I'm going to have to send it back to Amazon and re order it from oft directly if I understood the last email from oft correctly.

Search this thread, i think it's been posted a few times.

http://www.ft86club.com/forums/showt...118345&page=32

Just make sure the ID matches.

[Somerandom18]

Originally Posted by Joeyb860

So I just got my headers, over, pipe and front pipe installed but my oft does not have the 2017 flash and I emailed oft Monday but it takes a day to get a reply and each time it's one question one answer one day repeat. This sucks can anyone help. It sounds like I'm going to have to send it back to Amazon and re order it from oft directly if I understood the last email from oft correctly.

Are you K00C?

Sent from my Pixel XL using Tapatalk

[Joeyb860]

Originally Posted by Somerandom18

Are you K00C?

Sent from my Pixel XL using Tapatalk

Yes I am.

[ImDatSlaya]

Is there a digital speedometer adjustment accessible from RomRaider?

Sent from my ONEPLUS A5010 using Tapatalk

[steve99]

Originally Posted by ImDatSlaya

Is there a digital speedometer adjustment accessible from RomRaider?

Sent from my ONEPLUS A5010 using Tapatalk

No i dont believe it is. Its likely and adjustment in dash cluster itself, romradier definitions are for engine ECU

[Lococholo84]

Any one know the quickest way to contact open flash? Tried emailing them but no reply. Tried checking there web page but it don’t work. A friend gave me his unmarried tablet and I was trying to see if f they could do anything about it. I’m willing to pay for the service.