|
||||||
| Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack Specific topics relating to wheels and tires. |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#43 | |
|
Member
Join Date: Nov 2017
Drives: 2017 BRZ Limited
Location: TN
Posts: 30
Thanks: 0
Thanked 10 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
|
|
|
|
|
#44 |
|
Senior Member
Join Date: Mar 2015
Drives: 2014 GT86
Location: Latvia, Riga
Posts: 4,334
Thanks: 698
Thanked 2,086 Times in 1,436 Posts
Mentioned: 53 Post(s)
Tagged: 1 Thread(s)
|
If they are mounted on different wheels, why that would be any different as wheel swap? Just that if one uses tires on wheels for several seasons long without remounting/rebalancing, sometimes disbalance issues may occur. Like some wheel weights falling off, slight tire deformation from storing way or uneven wear and so on. If for long used wheel/tire you feel abnormal noises/vibration, it's worth to rebalance wheel&tire.
Car alignment (bit of camber/toe/caster, with camberbolts, camberplates, LCAs, UCAs, toe arms, eccentric bushings and such parts) doesn't change on wheel swap. And is usually set independently of tire mounts on wheels and often in different shops. It's just spacial orientation/angles you set wheel hubs to, that stays at it, no matter what weels/tires you mount on. One changes alignment in cases if one wishes a bit different handling or if there have been heavy hits to suspension and one suspects (maybe even feels) that alignment got out of whack and needs to be rechecked, not on wheel remounts. |
|
|
|
|
|
#45 | |
|
Senior Member
Join Date: May 2015
Drives: 15 BRZ LTD, 05 FXT
Location: Western MA
Posts: 1,032
Thanks: 561
Thanked 560 Times in 353 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Quote:
__________________
SOLD: 2015 WRB BRZ Limited ('02 WRX BBS, S-04's, Stoptech Sport pads, MXP SP, AVO drop in filter, Mishimoto Intake tube, decatted header, OFT 93 Stage 2 EL Tune, Kartboy rear shifter bushing, Whiteline transmission and subframe lockout bushings, ST Coilovers, SPC Camber bolts w/smaller crash bolt, SPC LCA's & SPC Toe Arm bushings, Red TOMs, TRD Wing.)
|
|
|
|
|
| The Following User Says Thank You to JazzleSAURUS For This Useful Post: | why? (11-23-2017) |
|
|
#46 | |
|
Member
Join Date: Nov 2017
Drives: 2017 BRZ Limited
Location: TN
Posts: 30
Thanks: 0
Thanked 10 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
|
|
|
|
|
#47 | |
|
Senior Member
Join Date: Mar 2015
Drives: 2014 GT86
Location: Latvia, Riga
Posts: 4,334
Thanks: 698
Thanked 2,086 Times in 1,436 Posts
Mentioned: 53 Post(s)
Tagged: 1 Thread(s)
|
Quote:
Reusing same set of wheels, just remounting winter or summer tires on them by season, on the other hand can let save some money on not getting 2nd set of wheels, lets have nice looking and possibly lighter wheels all year round, enables usage of some storage services for storing other season tires when unused if available in neighbourhood, not in your flat/house and you get tires rebalanced on each mount. But among cons: paying twice a year for remounting services, lower comfort & higher possibility to damage wheels in some winter road holes due lower sidewall profile with less flex/dampening, possibly need to get too wide winter tires to fit wider wheel width and also maybe pay more for tires. I'm not advocating 100% pro or contra one or another. Everybody may have his own preferences/priorities. In addition to post of JazzleSAURUS, if you DIY, remember: 1) tighten lugnuts in cross order (1-4-2-5-3), 2) after driving 100-200 miles check/tighten nuts again if needed, 3) tires are worth to store in place not subjected to direct sunlight/rain/snow, 4) imho better store on side, not vertically. Last edited by churchx; 11-22-2017 at 11:37 AM. |
|
|
|
|
|
|
#48 | |
|
Member
Join Date: Nov 2017
Drives: 2017 BRZ Limited
Location: TN
Posts: 30
Thanks: 0
Thanked 10 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
|
|
|
|
|
#49 | |
|
Member
Join Date: Nov 2017
Drives: 2017 BRZ Limited
Location: TN
Posts: 30
Thanks: 0
Thanked 10 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
1) Get winter tires (or all seasons?) (still not sure which is better for my weather/gameplan) - what size do i need to get for stock wheels? - depending on which you think is better for this season, what model? 2) install winter tires on stock wheels with previously mentioned Muteki lug nut set, 14mm OEM crash bolts (up to -2 deg camber and zero toe) - I'm assuming it won't be appropriate here to assess if I want spacers unless the new tires I get are the same size - Ideally I could find a setup that would make it to where it looks good with both if I decide to add spacers, if that makes sense... 3) Come the new season, get summer tires (225/45/R17) either Bridgestone S-04's or Michelin Pilot Super Sports and 17x8 +35 Oversteers - How do you tell when it's time to swap to summers? is it 45F and above? - I also will need to figure out how to properly store tires and wheels come time for the summer swap I know a good bit of this is repeat so sorry in advance for that, I'm just getting lost between these all seasons and winters. Also, I like the security in knowing I'm making the right purchase .
|
|
|
|
|
| The Following User Says Thank You to cytogenesis For This Useful Post: | why? (11-23-2017) |
|
|
#50 |
|
Senior Member
Join Date: Mar 2015
Drives: 2014 GT86
Location: Latvia, Riga
Posts: 4,334
Thanks: 698
Thanked 2,086 Times in 1,436 Posts
Mentioned: 53 Post(s)
Tagged: 1 Thread(s)
|
1) both me and JazzleSAURUS already had suggested on previous page for your weather all-seasons
. Due living in place that is colder on average and often snow/ice at least half of winter i never drove with ones myself using only real winter tires (currently even studded ones), but most often in this forum from all-seasons i saw mentioned michelin pilot A/S 3. Supposedly grip very well, about only drawback, due softer rubber sidewalls more mushy feeling/less sharp steering. For stock wheels of x7" width min 195, ideal 205-215, max 225. I'd go with stock size, which as you know it, 215/45/R17.2) if in future you want to use spacers (and thus possibly extended studs if with thicker slipon spacers), i guess worth getting open ended lugnuts. Not sure on oem crash bolt use. OEM crash bolts are same 14mm bolts that are in lower holes (stock upper bolt - 16mm). Most often they are reused together with normal camber bolt with lope in lower hole, relocating originals to upper. But if you want to use just OE crashbolts, you'll need to order another pair for upper hole .. and by then why not normal camberbolts (which for reference are SPC 81305 for lower hole, Whiteline KCA416 for upper)? They are not expensive. Regarding flushness, i don't care at all about it, and not too fond of spacers, but from what i know, if properly used/installed they are safe enough. Needed spacer thickness you can get from wheel offset and suggested offset from sticky wheel directory thread's first pot wheel flushness chart. If due spacer usage you'll get extended studs, check of their (or lugnuts' which you stated planning to get too) thread to match. Stock studs (and lugnuts) are M12x1.25 threaded, but often 12x1.5 are chosen as harder to strip. 3) from googled up 45F is 7C? Sounds about right. I wouldn't think/wait that precise though . At nights it's usually cooler, and if one has to drive early in the mornings .. when day temp in autumn starts drop around/below those 45F i start to think when it's less hassle to do switch, eg. in weekend. Though some sudden first snow even if thawn off right away, or temps below 0C(32F) in night may convince me to change right away, even if day temps are warm. One may also look at weather forecast.For storage i myself bought tire totes for simpler carrying around to-from car, and special tire storage cover/tire storage bag for all four tires/wheels stacked (i have small flat, so have to store them outside on balcony, to save space. So that cover is for protection from sunlight/rain/snow). Last edited by churchx; 11-22-2017 at 06:18 PM. |
|
|
|
|
|
#51 | |
|
Senior Member
Join Date: Aug 2016
Drives: 2017 ISM PP BRZ
Location: KY
Posts: 201
Thanks: 174
Thanked 164 Times in 81 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Also, it looks like you live in Tennessee, which certainly gets snow on the Appalachian side but if that's not where you live you'll likely be happy with "performance" all seasons, which you can find reviewed and compared on Tire Rack. I have Pirelli All Season Plus and they're a great choice in Louisville KY. Finally, spending big money on ultra grippy summer tires and not increasing you car's performance will result in a disappointing reduction of nimble handling and joy during moments of hoonigan behavior in our cars. That is not a universally agreed-with position on our forum, but the fact is SubaYota engineers designed the chassis specifically with the Primacys attached because in Europe they're cheap and their behavior on the car suited and complimented the chassis/engine package. It's possible to numb-down our cars and it's a drag to spend money to do so. |
|
|
|
|
|
|
#52 |
|
Senior Member
Join Date: Mar 2015
Drives: 2014 GT86
Location: Latvia, Riga
Posts: 4,334
Thanks: 698
Thanked 2,086 Times in 1,436 Posts
Mentioned: 53 Post(s)
Tagged: 1 Thread(s)
|
JSube: Primacies are more expensive then average in EU too. I can get MPSS for way less then them.
|
|
|
|
| The Following User Says Thank You to churchx For This Useful Post: | JSube (11-27-2017) |
|
|
#53 |
|
Senior Member
Join Date: Aug 2016
Drives: 2017 ISM PP BRZ
Location: KY
Posts: 201
Thanks: 174
Thanked 164 Times in 81 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
That's crazy that MPSS are less than PHPs, churchx. Here they're basically the same price. I'll admit I wouldn't pay full price for them, but I'd still rather have the PHPs for the street. Not because MPSS aren't great tires but I have what I feel is a better tire choice than them for the track on another set of wheels and I bought a new set of take-off PHPs for $400 from a forum member as my back-up street set.
|
|
|
|
|
|
#54 | |
|
Member
Join Date: Nov 2017
Drives: 2017 BRZ Limited
Location: TN
Posts: 30
Thanks: 0
Thanked 10 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
|
|
|
|
|
#55 | |
|
Senior Member
Join Date: Sep 2013
Drives: 2022 WRB BRZ Sport-Tech
Location: Ottawa, Canada
Posts: 1,746
Thanks: 131
Thanked 1,411 Times in 715 Posts
Mentioned: 25 Post(s)
Tagged: 2 Thread(s)
|
Quote:
Moving to wider, stickier tires will mean you lose the ability to get the car sliding as easily as it does out of the box. If you don't want that, then you have arguably made the car "better". If you plan on tracking the car at all, then stickier is probably better. |
|
|
|
|
|
|
#56 |
|
Senior Member
Join Date: Mar 2015
Drives: 2014 GT86
Location: Latvia, Riga
Posts: 4,334
Thanks: 698
Thanked 2,086 Times in 1,436 Posts
Mentioned: 53 Post(s)
Tagged: 1 Thread(s)
|
jvincent: for results & speed, yes. For just first experience / learning, imho opposite.
|
|
|
|
|
|
|
|
| Tags |
| tires and wheels, tires help, wheels help |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2017 BRZ wheels and tires 750 miles - SOLD THANKS! | ILLSMOQ | Wheels and Tires | 2 | 10-03-2017 04:21 PM |
| FS Set of 2017 BRZ OEM Michelin HP 215/45R17 Tires | jmark | Wheels and Tires | 2 | 09-24-2017 05:28 PM |
| Stock 2017 BRZ limited wheels/tires with 539 miles | joeyf1986 | Wheels and Tires | 8 | 08-27-2017 01:38 AM |
| C Street Guys with 2017 PP What size tires? | imnotsureaboutbrz | Tracking / Autocross / HPDE / Drifting | 19 | 04-15-2017 12:21 PM |
| WheelsCO - 2017 Michelin UHP Tires Spring GROUP BUY ( PS4S / PSS / PS Cup 2 ) | wheelsco | CANADIAN Sales | 0 | 02-16-2017 02:07 PM |