SOCAL: Local FS/FT

[EndlessAzure]

Originally Posted by OzzyGT86

Gauging interest on some JDL UEL Catless headers ceramic coated on titanium. 675$

Have pictures?

[midnight23]

Weds tc105n w/ hankook rs3 255/40/17 $1600
Voltex swan neck 1600mm w/ Seibon trunk $2300
Tomei 80r $700
Wasp composite splitter 5" $500
Cleib canards $200
S Craft Carbon Lip $400
4xMaxxis RC1 255/40/17 $600 new
4xMaxxis RC1 275/35/17 $600 new
Cash and Pick up only SoCal

Looking for clean SWP BRZ bumper, will take as trade value

Pics on instagram @Boxrzc6

[DGMlJDlBRZ]

Originally Posted by DGMlJDlBRZ

Got a couple of parts for sale off my BRZ.

Located in OXNARD

Message me if interested

- Kartboy extended length polyurethane exhaust hangers. Like new. Had on for less than 100 miles. Ended up going back to OEM length exhaust hangers. $30 FIRM




- Raceseng Red Reverse Lockout. Excellent condition. Comes with original rubber o-ring and lockout pin/screw. Also have the original box around somewhere. $50 FIRM

[Kordless]

These are all parts that are off the car and not needed anymore because I either upgraded or focused on something else instead.

WTS:

ASR Track Pipe, Jackson Racing Oil Cooler Core ONLY,

---------------------------------------------------

ASR Track Pipe

$75

No Gasket included, amazing sound on stock headers, selling because I went full exhaust with headers and it is too loud with the front pipe and header combo



---------------------------------------------------

Jackson Racing Oil Cooler (CORE ONLY)

$40

This is just the core from the kit, it was damaged in shipping by a vendor, so I bought a new one and never used this one since the vendor was paying for it.

This is essentially a brand new core with some minor dents, see imgur album for detailed pictures here: http://imgur.com/a/Unyv2



---------------------------------------------------

[IDFWU 420]

Anyone interested in a used APR splitter?

$280

also have stock rims AND tires 100% mint (had it on for a few miles when I first bought my car before switching to aftermarket wheels)

$400

[number_Un0]

Originally Posted by number_Un0

Selling a set of Klutch ML1 wheels. 18x9 35 offset all around. Continental tires 245/40/18 about 50-60% tread left.

Wheels are practically brand new. No curb rash or any damage to the wheels or tires.

Looking to get $800 for the set with the tires. I'll throw in spline lug nuts if you need as well.

Bump

[Spaz360]

Originally Posted by Spaz360

Open Flash Tablet - $400.

It is unmarried with the cable! If you let me know what header and transmission you have, I can upload the correct tunes onto the tablet before handing it over.

Bump

[NickGTI32]

As the title states I have a used Invidia Over Pipe.

$150 picked up in Santa Barbara California.

Will ship at owners expense PayPal ready.



Thanks!

Nick

[Kordless]

Originally Posted by Kordless

These are all parts that are off the car and not needed anymore because I either upgraded or focused on something else instead.

WTS:

APR GTC-200 With Trunk, ASR Track Pipe, Cusco Rear Sway Bar, Jackson Racing Oil Cooler Core ONLY, Project Mu Club Racer Rear Brake Pads

---------------------------------------------------

APR GTC-200 With 07X WRB Trunk (Wrapped in Avery Silver, Matches D6S Argento 99%)

$600 for the trunk and wing combo without any sort of trunk in return.

Please see pictures for quality, the clear coat is coming off, hence the low price for you to get it recleared.

The trunk has no spoiler holes, only holes for the wing.

Trunk Garnish not included.





---------------------------------------------------

ASR Track Pipe

$100

No Gasket included, amazing sound on stock headers, selling because I went full exhaust with headers and it is too loud with the front pipe and header combo



---------------------------------------------------

Cusco Rear Sway Bar (16mm Hollow)

$150

Self Explanatory, uses your stock sway bar mounting hardware.



---------------------------------------------------

Jackson Racing Oil Cooler (CORE ONLY)

$100

This is just the core from the kit, it was damaged in shipping by a vendor, so I bought a new one and never used this one since the vendor was paying for it.

This is essentially a brand new core with some minor dents, see imgur album for detailed pictures here: http://imgur.com/a/Unyv2



---------------------------------------------------

Project Mu CR Brake Pads (Rear)

$30

25% life left, selling because I went 999 front and rear.



---------------------------------------------------

Bump! Willing to deliver or meet up.

[OzzyGT86]

Originally Posted by OzzyGT86

Gauging interest on some JDL UEL Catless headers ceramic coated on titanium. 675$

Bump still on car but can take off once seller agrees. Just looking for a different set up nothing wrong with the headers

[Pekingduck]

Used HKS HyperMax IV GT coilover with 6k miles what you see is what you get

$1050 pickup or $1150 shipped










New Carbing Aluminum Air Intake Suction Kit MSRP $500 and limited vendor carry this with 3 month wait

$260 Pickup or $280 shipped




New Carbing Catch Can for FRS/BRZ/GT86

$180 pickup or $200




Used Billet Pro Shop 100 series 430g countersunk stainless steel shift knob $40 pickup or $50 shipped

[murselyfe]

** Torrance / Newport Beach **

KW Variant 3- $1450

Used for less than 8,000 miles before I switched to Airlift. Includes the following:
- Original box
- KW Tool Kit
- 7k front springs (original 6k springs included); currently sits 7k/7k




KW Clubsport 3 Way- $3000

Freshly rebuilt from KW, including brand new shock bodies. Will provide receipt to buyer for proof. Prior to that, these saw roughly 10,000-12,000 miles and about 6-7 track days. Original KW recessed top hats were sold and replaced with Ground Control recessed top hats for additional adjustability. Includes the following:
- KW Tool Kit
- 10k front springs, 8k rear springs
- stock 6k/7k springs included




Project Kics / Adapt-It-USA Wheel Adapters 5x100 to 5x114.3
3 pairs of adapters, all different sizes.

Project Kics 11mm, hub centric: $100
Adapt-it-USA 25mm, hub centric: $75
Adapt-it-USA 40mm: $80

[Drakiv]

I have a set of Gruppe-S UEL headers with the Gruppe-S OP for sale. $400 picked up from 92508 for both. They are in great shape, and no problems with around 5,000 miles on them. Only reason I removed them was for my turbo kit.

[ButtonMasher]

I have a 2013 ultramarine FR-S bumper with Toyota emblems and a dealer installed clear bra. Comes with OEM fog light covers and winjet fog light housing. Looking to straight trade for Galaxy Blue Silica BRZ bumper located in Irvine