FS: 10:1 Ptuning Built Motor, MAKES NOISE, VIDEO!!! - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FRSH86 · 05-23-2017, 05:47 PM

Looking to see if there is any interested and what offers I can get for a built motor that is making noise. Not 100% sure on what the issue is. Listen to video (keep in mind that is a cold start inside a concrete garage).
It was build by Ptunning in December 2014 and had their Turbo Kit on it. Had wideband, failsafe, injector kit, etc and was tuned by Ptuning to 420HP.
3 thousand miles later in August of 2016, during a 4th gear highway pull, the noise appeared and the car was trailered home immediately.
I purchased the car as is last year. Started it up once and recorded a video. It was not smoking and I did not see any metal shavings or coolant in the oil.
I have different plans for the car so the motor is for sale.
I have all the receipts from Ptuning build.

Here are some details:

#SC7405CP Pistons, 0.5mm overbore, 10:1 compression, 86mm.
Biran Cower I-Beam Rods.

Cleaned block
Square decked 2 sides
Honed Block
Re-grind rods journal 25mm
Straightened crank
Balanced
Set Clearance

OME Rod bearings
OEM Main bearings
ARP Head stud kit
AP case bolts set
OEM Bearing set-connecting rods
OEM Engine Timing Cover
OEM engine gasket kit set

Disassemble cylinder heads
Check cylinder heads
Cleaned cylinder heads.
Decked cylinder heads.

PM me or text me with offers or if you want more info
(612)229-1797.
Thanks, Stan.

*****VIDEO*****

***************

[IMG]http://i531.photobucket.com/albums/dd360/figak/IMG_9831_zps2mq8v***.jpg[/IMG]

FRSH86 · 05-23-2017, 05:53 PM

Moderators, I totally forgot. I will get a photo with the date and my username today.
Thanks.

elitegunslinger · 05-24-2017, 10:29 AM

Sounds like a spun bearing; were you turning in the highway during the pull? I can't imagine losing oil pressure in a straight line... What kind of oil pan were you using?

FRSH86 · 05-24-2017, 11:36 AM

Quote:

Originally Posted by elitegunslinger

Sounds like a spun bearing; were you turning in the highway during the pull? I can't imagine losing oil pressure in a straight line... What kind of oil pan were you using?

This is what I got from the previous owner, so I don't know for sure. I bought the car like this. No oil light was on. Stock oil pan.

ichitaka05 · 05-24-2017, 12:02 PM

Please follow the Member Classified Rules (#2) or I'll delete the thread.

Quote:

2. You must post AT LEAST ONE picture of the item(s) for sale with a sign included in the photo. On the sign, should be your username, date and the words FT86Club.com on it. It can be handwritten or printed on a piece of paper. No photoshopped signs will be accepted.

Thanks,

ichi

FRSH86 · 05-25-2017, 12:08 PM

Sign added. Thanks.

FRSH86 · 05-29-2017, 11:08 PM

No one is interested?

elitegunslinger · 05-30-2017, 09:58 AM

Quote:

Originally Posted by FRSH86

No one is interested?

I bid $350

FRSH86 · 06-08-2017, 12:48 PM

BUMP

Teseo · 06-08-2017, 12:55 PM

Dibs on turbo

FRSH86 · 06-08-2017, 04:23 PM

Quote:

Originally Posted by Teseo

Dibs on turbo

Sorry, that's not available!

VABeachBRZ · 06-08-2017, 09:14 PM

450

Coltonscool · 06-09-2017, 12:55 PM

Bid: $700 shipped.

FRSH86 · 06-09-2017, 05:34 PM

Thanks for the offers! But I'll have to decline.

05-23-2017, 05:47 PM	#1
FRSH86 Senior Member Join Date: Oct 2014 Drives: 2013 FR-S Location: Minnesota Posts: 142 Thanks: 4 Thanked 10 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	FS: 10:1 Ptuning Built Motor, MAKES NOISE, VIDEO!!! Looking to see if there is any interested and what offers I can get for a built motor that is making noise. Not 100% sure on what the issue is. Listen to video (keep in mind that is a cold start inside a concrete garage). It was build by Ptunning in December 2014 and had their Turbo Kit on it. Had wideband, failsafe, injector kit, etc and was tuned by Ptuning to 420HP. 3 thousand miles later in August of 2016, during a 4th gear highway pull, the noise appeared and the car was trailered home immediately. I purchased the car as is last year. Started it up once and recorded a video. It was not smoking and I did not see any metal shavings or coolant in the oil. I have different plans for the car so the motor is for sale. I have all the receipts from Ptuning build. Here are some details: #SC7405CP Pistons, 0.5mm overbore, 10:1 compression, 86mm. Biran Cower I-Beam Rods. Cleaned block Square decked 2 sides Honed Block Re-grind rods journal 25mm Straightened crank Balanced Set Clearance OME Rod bearings OEM Main bearings ARP Head stud kit AP case bolts set OEM Bearing set-connecting rods OEM Engine Timing Cover OEM engine gasket kit set Disassemble cylinder heads Check cylinder heads Cleaned cylinder heads. Decked cylinder heads. PM me or text me with offers or if you want more info (612)229-1797. Thanks, Stan. ***VIDEO* *********** [IMG]http://i531.photobucket.com/albums/dd360/figak/IMG_9831_zps2mq8v.jpg[/IMG] Last edited by FRSH86; 05-25-2017 at 03:27 PM. Reason: video*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Full blown turbo kit on built motor e85 VIDEO 3rd 4th gear pull	Anthony7515	Off-Topic Lounge [WARNING: NO POLITICS]	3	03-31-2017 01:47 AM
Full blown turbo kit on built motor e85 VIDEO 3rd 4th gear pull	Anthony7515	BRZ First-Gen (2012+) — General Topics	0	03-31-2017 12:30 AM
Full blown turbo kit on built motor e85 VIDEO	Anthony7515	Forced Induction	0	03-31-2017 12:27 AM
PTUNING: 501WHP 377WTQ 20psi Stock Motor PTUNING Spec-SS GTX3076R Turbo System	ptuning	Forced Induction	47	06-16-2014 04:52 PM
FT-86 makes UK debut at Goodwood Moving Motor Show	Hachiroku	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	28	07-09-2010 03:57 PM

05-23-2017, 05:53 PM	#2
FRSH86 Senior Member Join Date: Oct 2014 Drives: 2013 FR-S Location: Minnesota Posts: 142 Thanks: 4 Thanked 10 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Moderators, I totally forgot. I will get a photo with the date and my username today. Thanks.

05-24-2017, 10:29 AM	#3
elitegunslinger Senior Member Join Date: Oct 2016 Drives: 2014 BRZ Limited Location: NJ Posts: 120 Thanks: 10 Thanked 24 Times in 22 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Sounds like a spun bearing; were you turning in the highway during the pull? I can't imagine losing oil pressure in a straight line... What kind of oil pan were you using?

05-25-2017, 12:08 PM	#6
FRSH86 Senior Member Join Date: Oct 2014 Drives: 2013 FR-S Location: Minnesota Posts: 142 Thanks: 4 Thanked 10 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Sign added. Thanks.

05-29-2017, 11:08 PM	#7
FRSH86 Senior Member Join Date: Oct 2014 Drives: 2013 FR-S Location: Minnesota Posts: 142 Thanks: 4 Thanked 10 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	No one is interested?

06-08-2017, 12:48 PM	#9
FRSH86 Senior Member Join Date: Oct 2014 Drives: 2013 FR-S Location: Minnesota Posts: 142 Thanks: 4 Thanked 10 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	BUMP

06-08-2017, 12:55 PM	#10
Teseo Senior Member Join Date: Jun 2014 Drives: frs Location: Gunsai Posts: 4,951 Thanks: 7,463 Thanked 2,978 Times in 1,801 Posts Mentioned: 23 Post(s) Tagged: 2 Thread(s)	Dibs on turbo

06-08-2017, 09:14 PM	#12
VABeachBRZ Senior Member Join Date: Jun 2015 Drives: BRZ Location: Virginia Posts: 169 Thanks: 34 Thanked 46 Times in 34 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	450

06-09-2017, 12:55 PM	#13
Coltonscool Member Join Date: Sep 2013 Drives: WSP FRS, S13 240sx Location: Bay Area Posts: 83 Thanks: 9 Thanked 14 Times in 14 Posts Mentioned: 1 Post(s) Tagged: 2 Thread(s)	Bid: $700 shipped.

06-09-2017, 05:34 PM	#14
FRSH86 Senior Member Join Date: Oct 2014 Drives: 2013 FR-S Location: Minnesota Posts: 142 Thanks: 4 Thanked 10 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Thanks for the offers! But I'll have to decline.

User Name		Remember Me?
Password