FS: 10:1 Ptuning Built Motor, MAKES NOISE, VIDEO!!!
 

Looking to see if there is any interested and what offers I can get for a built motor that is making noise. Not 100% sure on what the issue is. Listen to video (keep in mind that is a cold start inside a concrete garage).
It was build by Ptunning in December 2014 and had their Turbo Kit on it. Had wideband, failsafe, injector kit, etc and was tuned by Ptuning to 420HP.
3 thousand miles later in August of 2016, during a 4th gear highway pull, the noise appeared and the car was trailered home immediately.
I purchased the car as is last year. Started it up once and recorded a video. It was not smoking and I did not see any metal shavings or coolant in the oil.
I have different plans for the car so the motor is for sale.
I have all the receipts from Ptuning build.

Here are some details:

#SC7405CP Pistons, 0.5mm overbore, 10:1 compression, 86mm.
Biran Cower I-Beam Rods.

Cleaned block
Square decked 2 sides
Honed Block
Re-grind rods journal 25mm
Straightened crank
Balanced
Set Clearance

OME Rod bearings
OEM Main bearings
ARP Head stud kit
AP case bolts set
OEM Bearing set-connecting rods
OEM Engine Timing Cover
OEM engine gasket kit set

Disassemble cylinder heads
Check cylinder heads
Cleaned cylinder heads.
Decked cylinder heads.

PM me or text me with offers or if you want more info
(612)229-1797.
Thanks, Stan.

*****VIDEO*****

http://i531.photobucket.com/albums/d...psczcu5tvf.mp4

***************

http://i531.photobucket.com/albums/d...psdydkdsom.jpg

http://i531.photobucket.com/albums/d...psxew0zcgl.jpg

http://i531.photobucket.com/albums/d...pseqlw4lzt.jpg

http://i531.photobucket.com/albums/d...psjtnrfscl.jpg

http://i531.photobucket.com/albums/d...psnjqagh5w.jpg

http://i531.photobucket.com/albums/d...psr3qtguoa.jpg

http://i531.photobucket.com/albums/d...ps8q88p3yo.jpg

http://i531.photobucket.com/albums/d...pskwruqwbf.jpg

[IMG]http://i531.photobucket.com/albums/dd360/figak/IMG_9831_zps2mq8v***.jpg[/IMG]

Moderators, I totally forgot. I will get a photo with the date and my username today.
Thanks.

Sounds like a spun bearing; were you turning in the highway during the pull? I can't imagine losing oil pressure in a straight line... What kind of oil pan were you using?

This is what I got from the previous owner, so I don't know for sure. I bought the car like this. No oil light was on. Stock oil pan.

Please follow the Member Classified Rules (#2) or I'll delete the thread.

Thanks,

ichi

Sign added. Thanks.

No one is interested?

I bid $350

BUMP

Dibs on turbo

Sorry, that's not available!

450

Bid: $700 shipped.

Thanks for the offers! But I'll have to decline.