Toyota TechStream Ver GTS_10.10.018 - Diagnostic Tools for FR-S/GT86/BRZ - Page 15 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Liliflower · 04-06-2017, 06:27 AM

Updated! Techstream Ver.12.00.127 crack version + patch, no need activation
http://blog.obdii365.com/2017/04/05/...127-100-patch/

tested on windows 7. It is working. Just for share

camry619 · 04-07-2017, 11:20 PM

Quote:

Originally Posted by HyperTech

how you get it to work? mine keep asking for a key to register...

I have Techstream V12.00.127 download link with register key in the text file.
https://mega.nz/#!kAxzDTqY!2O9PHSr7lNpz12iTZYVpD0JvP7wP5t2qta-zWILmFrA
Please do a fresh install and you will not have any problems.
Works ok on WIN7 32bit, haven't try WIN10, someone try yes.

Test it ok on the following interfaces:
MINI VCI
Cheapest MINI VCI Diagnostic cable
MVCI 3 in 1 interface
Mangoose VCI for Toyota
OTC GTS (IT3) Toyota Diagnostic Tool

And I make a installation video to prove it is cracked with working register key.

Gunman · 04-27-2017, 07:59 PM

This cable work? seems to match the others.
https://www.amazon.com/CBK-Authentic...mini+vci+scion

Trap63 · 04-28-2017, 05:39 AM

Toyota TechStream Ver GTS_12.00.127 UPDATED POST #1

YamahaR86 · 04-28-2017, 06:48 PM

Did a lot of searching but can't find the answer. I have version 12 installed but don't have a customize button to change my seat belt chimes.

Did it change from the others? Can anyone show me where the option to change this is?

BRZyJ · 04-28-2017, 07:20 PM

Quote:

Originally Posted by YamahaR86

Did a lot of searching but can't find the answer. I have version 12 installed but don't have a customize button to change my seat belt chimes.

I had the same thing...it looked like it was connected, but there was no customize option and everything else was yellow/not ready status. I finally gave up screwing around with the 64 bit drivers and installed it on Windows XP, and the customize option was there. I noticed it also read the VIN after connecting which it was not doing before.

I didn't see any way to disable the door open sound when acc. is on though...that was the whole reason I bought the cable.

YamahaR86 · 04-28-2017, 09:11 PM

Quote:

Originally Posted by BRZyJ

I had the same thing...it looked like it was connected, but there was no customize option and everything else was yellow/not ready status. I finally gave up screwing around with the 64 bit drivers and installed it on Windows XP, and the customize option was there. I noticed it also read the VIN after connecting which it was not doing before.

I didn't see any way to disable the door open sound when acc. is on though...that was the whole reason I bought the cable.

It connected for me. I tried it on win 10 64 but didn't work. So I connected it on window 7 32. I can see malfunctions and clear my tpms light but no customize button.

Thinking they might have changed it from another version so I may try an earlier version.

YamahaR86 · 04-29-2017, 03:21 PM

V12 does not work for me. I installed v10.10 and it works for me.

Using Windows 7 x86 (32 bit).

V12 does not have "customize" feature, Utility feature or health check. Installed V10.10 and it showed up for me.

BRZyJ · 04-29-2017, 04:44 PM

Weird, I fired up the crusty laptop to check the version...12.00.127
...I think I had to set it to Europe before it worked.

JF86Red · 05-06-2017, 01:51 PM

I finally tested it, and it works again.
Thanks a lot

byun · 05-06-2017, 05:49 PM

anyone in NorCal have this working?

Sent from my iPhone using Tapatalk

BRZyJ · 05-07-2017, 01:53 AM

Quote:

Originally Posted by byun

anyone in NorCal have this working?

Yep

nkobns · 07-23-2018, 05:35 AM

Does anyone know if there are some drivers to make the cable work with win10 32bits ?

Thanks !

mato2sk · 08-02-2018, 02:54 PM

Is it possible to read the MAF sensor Voltage with techstream?
I want to scale the maf sensor.

04-28-2017, 05:39 AM	#200
Trap63 Senior Member Join Date: Apr 2013 Drives: Brz WRB - Europe LHD Location: TURIN - Piedmont - ITALY Posts: 922 Thanks: 1,176 Thanked 839 Times in 289 Posts Mentioned: 40 Post(s) Tagged: 1 Thread(s)	Toyota TechStream Ver GTS_12.00.127 UPDATED POST #1 __________________

04-28-2017, 06:48 PM	#201
YamahaR86 JDM Vaping Stance Nation Join Date: May 2013 Drives: 2013 White Location: FL Posts: 710 Thanks: 650 Thanked 345 Times in 218 Posts Mentioned: 14 Post(s) Tagged: 2 Thread(s)	Did a lot of searching but can't find the answer. I have version 12 installed but don't have a customize button to change my seat belt chimes. Did it change from the others? Can anyone show me where the option to change this is? __________________ Clueless

04-29-2017, 03:21 PM	#204
YamahaR86 JDM Vaping Stance Nation Join Date: May 2013 Drives: 2013 White Location: FL Posts: 710 Thanks: 650 Thanked 345 Times in 218 Posts Mentioned: 14 Post(s) Tagged: 2 Thread(s)	V12 does not work for me. I installed v10.10 and it works for me. Using Windows 7 x86 (32 bit). V12 does not have "customize" feature, Utility feature or health check. Installed V10.10 and it showed up for me. __________________ Clueless

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPMS Tools	developer	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	27	10-04-2021 02:28 PM
anyone with a shop or tools	Tylub	Southern California	0	05-14-2013 12:03 PM
Tools?	Gost	Mechanical Maintenance (Oil, Fluids, Break-In, Servicing)	35	04-03-2013 04:46 PM
Tools for DIY maintenance?	F1point4	Mechanical Maintenance (Oil, Fluids, Break-In, Servicing)	19	08-08-2012 08:47 PM

04-06-2017, 06:27 AM	#197
Liliflower Member Join Date: Nov 2014 Drives: 2008 FT86 GTS Location: California, U.S.A Posts: 17 Thanks: 0 Thanked 11 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Updated! Techstream Ver.12.00.127 crack version + patch, no need activation http://blog.obdii365.com/2017/04/05/...127-100-patch/ tested on windows 7. It is working. Just for share

05-06-2017, 01:51 PM	#206
JF86Red Member Join Date: Nov 2014 Drives: GT86 C7P Location: France Posts: 16 Thanks: 4 Thanked 12 Times in 4 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I finally tested it, and it works again. Thanks a lot

07-23-2018, 05:35 AM	#209
nkobns Member Join Date: Sep 2017 Drives: Sideways Location: France Posts: 26 Thanks: 1 Thanked 28 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Does anyone know if there are some drivers to make the cable work with win10 32bits ? Thanks !

08-02-2018, 02:54 PM	#210
mato2sk Junior Member Join Date: Dec 2017 Drives: Toyota GT86 Location: Slovakia Posts: 9 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Is it possible to read the MAF sensor Voltage with techstream? I want to scale the maf sensor.

User Name		Remember Me?
Password