Light Weight Low Offset wheels - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

GT86Olli · 03-10-2017, 09:15 AM

Hi,

I'm looking for a set of lightweight wheels with a low offset.

I drive a GT86 with Rocket Bunny V1 Kit and actually mounted SSR Professor SP1 in 9.5x18 -3 and 10.5x18 -26 (functional setup for track)
They fit perfectly without spacers needed and for a threepiece wheel, they are light (10.6 kg / 23.4 lbs).

But I thought about to change to 17" and a square setup so I'm looking for a set of 9.5x17 or 10x17 ET 0 to -30 with 265/40 17

Any ideas? I searched for long time, but can't find anything.

There are Watanabe in 17" I know about. 9.5x17 -19 all around and 9 kg (19,8 lbs) per wheel, so quite perfect!
But that offset is too low for the front with 265/40 tires...

So any other wheels known? Thx guys!

richie incognito · 03-10-2017, 12:37 PM

I'm not in tune with rocket bunny fitment but I find it hard to believe you will be able to go with a square set up and have it work without either the front or tears looking off. I would expect you will either rub in the front or sunk in the rear.

GT86Olli · 03-10-2017, 01:55 PM

A little spacer (little!) at the rear would be ok.
But yes, that's the problem and why it's so difficult to find wheels.

In case of the Watanabe -19 in the front would be too aggressive and in the rear I would need 15mm spacer

GT86Olli · 03-13-2017, 06:32 AM

No ideas?

sqd · 03-13-2017, 08:55 AM

Quote:

Originally Posted by GT86Olli

No ideas?

I can't help you unfortunately, but could you post a few photos of your car with the SSRs, please?

chargedup · 03-13-2017, 10:06 AM

kenisis, fiske, and ccw are all pretty damn light. or te37's

GT86Olli · 03-14-2017, 07:11 AM

Quote:

Originally Posted by sqd

I can't help you unfortunately, but could you post a few photos of your car with the SSRs, please?

It's not finished yet, paint is actually in progress.
Here some pics with the unpainted kit on the car:

Quote:

kenisis, fiske, and ccw are all pretty damn light. or te37's

Thanks!

sqd · 03-14-2017, 07:47 AM

Quote:

Originally Posted by GT86Olli

It's not finished yet, paint is actually in progress.
Here some pics with the unpainted kit on the car

Looks great, thanks!

What tire sizes are you using in these photos?

GT86Olli · 03-14-2017, 08:29 AM

Thank you!
245/35 18 front and 285/30 18 rear. Toyo Proxes T1 Sport
They fit perfectly with the rocket bunny V1 fenders

mav1178 · 03-14-2017, 03:44 PM

TE37V 17x9.5 upwards to 10.5" all around, and add 500>514 bolt on adapter spacers is your only choice.

But if you go the bolt-on spacer route, you can run almost any type of wheel out there.

Alternatively, you can run something like Work Meister S1R that allows you to customize your offset with 5-100 bolt pattern.

-alex

sqd · 03-14-2017, 07:42 PM

Quote:

Originally Posted by GT86Olli

Thank you!
245/35 18 front and 285/30 18 rear. Toyo Proxes T1 Sport
They fit perfectly with the rocket bunny V1 fenders

Great info, thank you. You aren't selling the SSRs?

GT86Olli · 03-15-2017, 07:23 AM

@mav1178
Yeah I know but I want to avoid adapters... so no 5x114 possible
Work Meister are 3 piece, too. So I can go the SSR route also
@sqd
I would sell them. You're pm'd, Sir!

8RZ · 03-15-2017, 09:11 AM

What weight per wheel would you consider light?

GT86Olli · 03-15-2017, 11:28 AM

For that size everything around 9 kg (19,8 lbs).
Per rim of course.

03-10-2017, 09:15 AM	#1
GT86Olli Member Join Date: Jul 2016 Drives: GT86 Inferno Orange Location: Germany Posts: 32 Thanks: 0 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Light Weight Low Offset wheels Hi, I'm looking for a set of lightweight wheels with a low offset. I drive a GT86 with Rocket Bunny V1 Kit and actually mounted SSR Professor SP1 in 9.5x18 -3 and 10.5x18 -26 (functional setup for track) They fit perfectly without spacers needed and for a threepiece wheel, they are light (10.6 kg / 23.4 lbs). But I thought about to change to 17" and a square setup so I'm looking for a set of 9.5x17 or 10x17 ET 0 to -30 with 265/40 17 Any ideas? I searched for long time, but can't find anything. There are Watanabe in 17" I know about. 9.5x17 -19 all around and 9 kg (19,8 lbs) per wheel, so quite perfect! But that offset is too low for the front with 265/40 tires... So any other wheels known? Thx guys!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
► APEX \| FR-S/BRZ Light-Weight Track Wheels	APEX Race Parts	Wheels and Tires	7	05-27-2016 04:18 AM
Light weight forged wheels?	slyphen	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	5	09-22-2015 02:35 PM
FS- Kosei K1TS 17x7 wheels 50mm offset- Autocross LIGHT!	solort	Wheels and Tires	2	07-09-2015 05:08 PM
Light weight wheels	vegasfrs	Want-To-Buy Requests	0	03-22-2014 12:31 AM
Light weight wheels <6.8kgs (15lbs)	diss7	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	8	09-18-2012 12:32 AM

03-10-2017, 12:37 PM	#2
richie incognito Senior Member Join Date: Jan 2017 Drives: BRZ- all the colours Location: Toronto Posts: 101 Thanks: 4 Thanked 22 Times in 15 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I'm not in tune with rocket bunny fitment but I find it hard to believe you will be able to go with a square set up and have it work without either the front or tears looking off. I would expect you will either rub in the front or sunk in the rear.

03-10-2017, 01:55 PM	#3
GT86Olli Member Join Date: Jul 2016 Drives: GT86 Inferno Orange Location: Germany Posts: 32 Thanks: 0 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	A little spacer (little!) at the rear would be ok. But yes, that's the problem and why it's so difficult to find wheels. In case of the Watanabe -19 in the front would be too aggressive and in the rear I would need 15mm spacer

03-13-2017, 06:32 AM	#4
GT86Olli Member Join Date: Jul 2016 Drives: GT86 Inferno Orange Location: Germany Posts: 32 Thanks: 0 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	No ideas?

03-13-2017, 10:06 AM	#6
chargedup Member Join Date: Apr 2016 Drives: SC BRZ Location: Sacramento, CA Posts: 54 Thanks: 8 Thanked 8 Times in 6 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	kenisis, fiske, and ccw are all pretty damn light. or te37's

03-14-2017, 08:29 AM	#9
GT86Olli Member Join Date: Jul 2016 Drives: GT86 Inferno Orange Location: Germany Posts: 32 Thanks: 0 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Thank you! 245/35 18 front and 285/30 18 rear. Toyo Proxes T1 Sport They fit perfectly with the rocket bunny V1 fenders

03-14-2017, 03:44 PM	#10
mav1178 Senior Member Join Date: Apr 2013 Drives: 2005 Toyota Camry Location: 91745 Posts: 6,562 Thanks: 493 Thanked 6,099 Times in 3,030 Posts Mentioned: 95 Post(s) Tagged: 3 Thread(s)	TE37V 17x9.5 upwards to 10.5" all around, and add 500>514 bolt on adapter spacers is your only choice. But if you go the bolt-on spacer route, you can run almost any type of wheel out there. Alternatively, you can run something like Work Meister S1R that allows you to customize your offset with 5-100 bolt pattern. -alex

03-15-2017, 07:23 AM	#12
GT86Olli Member Join Date: Jul 2016 Drives: GT86 Inferno Orange Location: Germany Posts: 32 Thanks: 0 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	@mav1178 Yeah I know but I want to avoid adapters... so no 5x114 possible Work Meister are 3 piece, too. So I can go the SSR route also @sqd I would sell them. You're pm'd, Sir!

03-15-2017, 11:28 AM	#14
GT86Olli Member Join Date: Jul 2016 Drives: GT86 Inferno Orange Location: Germany Posts: 32 Thanks: 0 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	For that size everything around 9 kg (19,8 lbs). Per rim of course.

User Name		Remember Me?
Password