Light Weight Low Offset wheels
 

Hi,

I'm looking for a set of lightweight wheels with a low offset.

I drive a GT86 with Rocket Bunny V1 Kit and actually mounted SSR Professor SP1 in 9.5x18 -3 and 10.5x18 -26 (functional setup for track)
They fit perfectly without spacers needed and for a threepiece wheel, they are light (10.6 kg / 23.4 lbs).

But I thought about to change to 17" and a square setup so I'm looking for a set of 9.5x17 or 10x17 ET 0 to -30 with 265/40 17

Any ideas? I searched for long time, but can't find anything. :(
There are Watanabe in 17" I know about. 9.5x17 -19 all around and 9 kg (19,8 lbs) per wheel, so quite perfect!
But that offset is too low for the front with 265/40 tires...

So any other wheels known? Thx guys!

I'm not in tune with rocket bunny fitment but I find it hard to believe you will be able to go with a square set up and have it work without either the front or tears looking off. I would expect you will either rub in the front or sunk in the rear.

A little spacer (little!) at the rear would be ok.
But yes, that's the problem and why it's so difficult to find wheels.

In case of the Watanabe -19 in the front would be too aggressive and in the rear I would need 15mm spacer

No ideas? :(

I can't help you unfortunately, but could you post a few photos of your car with the SSRs, please?

kenisis, fiske, and ccw are all pretty damn light. or te37's

It's not finished yet, paint is actually in progress.
Here some pics with the unpainted kit on the car:
https://abload.de/img/img-20170114-wa0004x60bj6z.jpg

https://abload.de/img/img-20170114-wa0000obggjxb.jpg

https://abload.de/img/img-20170114-wa0003uw88k3g.jpg

Thanks! :thumbsup:

Looks great, thanks! :) What tire sizes are you using in these photos?

Thank you!
245/35 18 front and 285/30 18 rear. Toyo Proxes T1 Sport
They fit perfectly with the rocket bunny V1 fenders

TE37V 17x9.5 upwards to 10.5" all around, and add 500>514 bolt on adapter spacers is your only choice.

But if you go the bolt-on spacer route, you can run almost any type of wheel out there.

Alternatively, you can run something like Work Meister S1R that allows you to customize your offset with 5-100 bolt pattern.

-alex

Great info, thank you. You aren't selling the SSRs? :)

@mav1178
Yeah I know but I want to avoid adapters... so no 5x114 possible
Work Meister are 3 piece, too. So I can go the SSR route also
@sqd
I would sell them. You're pm'd, Sir! :)

What weight per wheel would you consider light?

For that size everything around 9 kg (19,8 lbs).
Per rim of course.