tow cover slit - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

mclovin85 · 03-03-2017, 01:48 PM

i wanted to see if anyone knew where i can make the little slit for the tow cover so i can have the tow strap come out of the slit

JazzleSAURUS · 03-03-2017, 02:00 PM

You can make it in your basement or garage. I'd imagine a razor blade or dremel could get the job done.

mclovin85 · 03-03-2017, 02:02 PM

Quote:

Originally Posted by JazzleSAURUS

You can make it in your basement or garage. I'd imagine a razor blade or dremel could get the job done.

wouldnt it mess up the paint around the area im cutting?

JazzleSAURUS · 03-03-2017, 03:14 PM

put painters tape over it, go slow and careful. Expect a small amount of collatoral. I would use touch up paint after the fact.

Alternatively you could have a body shop do it, but I'd expect to pay $100 for them to do it, and frankly I doubt they'd do much better of a job.

Take your time, cut careful, warm the paint first so it cuts instead of cracks, and touch up paint the edges, (or use some trim lock maybe!) to protect them.

mclovin85 · 03-03-2017, 08:43 PM

Quote:

Originally Posted by JazzleSAURUS

put painters tape over it, go slow and careful. Expect a small amount of collatoral. I would use touch up paint after the fact.

Alternatively you could have a body shop do it, but I'd expect to pay $100 for them to do it, and frankly I doubt they'd do much better of a job.

Take your time, cut careful, warm the paint first so it cuts instead of cracks, and touch up paint the edges, (or use some trim lock maybe!) to protect them.

ahh fosho thanks for your help

retoocs · 03-04-2017, 03:21 PM

Order a new one and cut into that, they are pretty cheap.

Mr.ac · 03-04-2017, 04:50 PM

Quote:

Originally Posted by retoocs

Order a new one and cut into that, they are pretty cheap.

Ditto.

mclovin85 · 03-06-2017, 02:13 PM

Quote:

Originally Posted by retoocs

Order a new one and cut into that, they are pretty cheap.

ooo alrighty thank you

03-03-2017, 01:48 PM	#1
mclovin85 Senior Member Join Date: Jan 2016 Drives: scion fr-s Location: california Posts: 187 Thanks: 5 Thanked 24 Times in 22 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	tow cover slit i wanted to see if anyone knew where i can make the little slit for the tow cover so i can have the tow strap come out of the slit

03-03-2017, 02:00 PM	#2
JazzleSAURUS Senior Member Join Date: May 2015 Drives: 15 BRZ LTD, 05 FXT Location: Western MA Posts: 1,032 Thanks: 561 Thanked 560 Times in 353 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	You can make it in your basement or garage. I'd imagine a razor blade or dremel could get the job done. __________________ SOLD: 2015 WRB BRZ Limited ('02 WRX BBS, S-04's, Stoptech Sport pads, MXP SP, AVO drop in filter, Mishimoto Intake tube, decatted header, OFT 93 Stage 2 EL Tune, Kartboy rear shifter bushing, Whiteline transmission and subframe lockout bushings, ST Coilovers, SPC Camber bolts w/smaller crash bolt, SPC LCA's & SPC Toe Arm bushings, Red TOMs, TRD Wing.)

03-03-2017, 03:14 PM	#4
JazzleSAURUS Senior Member Join Date: May 2015 Drives: 15 BRZ LTD, 05 FXT Location: Western MA Posts: 1,032 Thanks: 561 Thanked 560 Times in 353 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	put painters tape over it, go slow and careful. Expect a small amount of collatoral. I would use touch up paint after the fact. Alternatively you could have a body shop do it, but I'd expect to pay $100 for them to do it, and frankly I doubt they'd do much better of a job. Take your time, cut careful, warm the paint first so it cuts instead of cracks, and touch up paint the edges, (or use some trim lock maybe!) to protect them. __________________ SOLD: 2015 WRB BRZ Limited ('02 WRX BBS, S-04's, Stoptech Sport pads, MXP SP, AVO drop in filter, Mishimoto Intake tube, decatted header, OFT 93 Stage 2 EL Tune, Kartboy rear shifter bushing, Whiteline transmission and subframe lockout bushings, ST Coilovers, SPC Camber bolts w/smaller crash bolt, SPC LCA's & SPC Toe Arm bushings, Red TOMs, TRD Wing.)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cover king FRS/BRZ specific cover(outdoor)	nickmerronesucks	Exterior Parts (Aero, Lighting, Etc.)	0	05-09-2016 02:40 PM
SOLDBlue engine Cover and Grimmspeed Pulley Cover	Husker BRZ	Engine, Exhaust, Bolt-Ons	2	03-24-2016 01:05 PM
WTB: Trunk carpet, cover, spare tire, tools, foams, latch trim/cover	Izzy	Want-To-Buy Requests	7	06-27-2015 07:38 PM
1of86 limited cover. Indoor cover mint condition	SpecPer	Cleaning and Detailing	0	06-06-2015 09:17 PM
Oil Leak from either Timing Cover or Valve Cover	BRZY	Issues \| Warranty \| Recalls / TSB	5	04-06-2015 09:31 AM

03-04-2017, 03:21 PM	#6
retoocs Senior Member Join Date: May 2013 Drives: BRZ Location: Sacramento, CA Posts: 168 Thanks: 2 Thanked 63 Times in 43 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Order a new one and cut into that, they are pretty cheap.

User Name		Remember Me?
Password