Engine will not turn off! - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

ShootZ · 12-07-2016, 05:10 PM

Hey, I have a 2015 FRS, this just started happening a couple weeks ago.

When my hazards are on, I can turn the key off, all gauges, lights etc. turn off like normal but the engine stays running, even with the key out. Put the key back in, turn the hazards off and turn key off and it'll turn off.

And ideas?

Tcoat · 12-07-2016, 05:14 PM

Well that is a new one!
All stock? No mods of any kind (other than wheels or suspension)

Overdrive · 12-07-2016, 05:38 PM

Do you have a remote starter installed?

VIP BRZ · 12-07-2016, 05:52 PM

wait... how often do you need to turn off the car while your hazards are on?

This sounds like a real minor inconvenience, just turn your engine off first and then activate the hazards.

Tcoat · 12-07-2016, 05:56 PM

Quote:

Originally Posted by VIP BRZ

wait... how often do you need to turn off the car while your hazards are on?

This sounds like a real minor inconvenience, just turn your engine off first and then activate the hazards.

Still shouldn't happen and should get to the bottom of it before it gets worse.

Patient "Doctor it really hurts when I laugh"
Doctor "well don't laugh"

dattran86 · 12-07-2016, 06:21 PM

Could have be a bad Ignition Switch? does the same thing happen without the Hazard light being on?

catsspat · 12-07-2016, 08:01 PM

Are you by any chance using one of those cheap flasher modules (for avoiding hyperflashing with LED bulbs)? If so, try putting the stock flasher back in.

Nonsense you say? When I first put LED bulbs and a cheap flasher, with everything off other than the hazards, I heard weird sound with something on the dash lighting up dimly. I'm thinking it was maybe the fuel pump. I immediately took that garbage out and picked up a Tap-turn module (Canadian).

I opened up the cheap flasher module and found 9V relays in it. Garbage. In the end, there's really no reason to use one. You can just mod the stock one to work with LEDs. See http://www.ft86club.com/forums/showp...97&postcount=8

TheGuyWithTheFireStorm · 12-07-2016, 09:37 PM

Anyone else wanting to see a video of this? Haha..

Sorry, this is absolutely no help

Ultramaroon · 12-07-2016, 11:53 PM

Quote:

Originally Posted by TheGuyWithTheFireStorm

Anyone else wanting to see a video of this? Haha..

Sorry, this is absolutely no help

You didn't answer Tcoat's (or anyone else's) question. Exactly what mods do you have, if any?

Help us help you.

humfrz · 12-08-2016, 12:12 AM

Quote:

Originally Posted by ShootZ

Hey, I have a 2015 FRS, this just started happening a couple weeks ago.

When my hazards are on, I can turn the key off, all gauges, lights etc. turn off like normal but the engine stays running, even with the key out. Put the key back in, turn the hazards off and turn key off and it'll turn off.

And ideas?

Hello ShootZ and welcome to our forum......

Like others have asked, what mods do you have that have something to do with the electrical system..??

Or, to put it another way, what cha been messen with ... ??

humfrz

TheGuyWithTheFireStorm · 12-08-2016, 12:52 AM

Quote:

Originally Posted by Ultramaroon

You didn't answer Tcoat's (or anyone else's) question. Exactly what mods do you have, if any?

Help us help you.

But I'm not the one with the problem...

Ultramaroon · 12-08-2016, 01:31 AM

Quote:

Originally Posted by TheGuyWithTheFireStorm

But I'm not the one with the problem...

That's no excuse.

humfrz · 12-08-2016, 02:34 AM

Quote:

Originally Posted by TheGuyWithTheFireStorm

But I'm not the one with the problem...

First off ....... "Sorry, this is absolutely no help" ....... is a problem .....

Then @Ultramaroon ask you a question ........ and you spouted off with some dribble about "But I'm not the one with the problem".

Your first step to recovery is to admit that you have a problem ......

No wonder @Tcoat gets impatient with posters ...... that have problems, then deny that they have a problem ....... and THEN don't follow advice to solve their problem.

Comments .........

humfrz

Ultramaroon · 12-08-2016, 03:20 AM

Quote:

Originally Posted by humfrz

Comments .........

I think we're both getting a bit senile.

12-07-2016, 05:10 PM	#1
ShootZ Junior Member Join Date: Feb 2016 Drives: 2015 Frs Location: Dallas Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Engine will not turn off! Hey, I have a 2015 FRS, this just started happening a couple weeks ago. When my hazards are on, I can turn the key off, all gauges, lights etc. turn off like normal but the engine stays running, even with the key out. Put the key back in, turn the hazards off and turn key off and it'll turn off. And ideas?

12-07-2016, 05:14 PM	#2
Tcoat Senior Member Join Date: Jul 2014 Drives: 2020 Hakone Location: London, Ont Posts: 69,841 Thanks: 61,656 Thanked 108,295 Times in 46,456 Posts Mentioned: 2499 Post(s) Tagged: 50 Thread(s)	Well that is a new one! All stock? No mods of any kind (other than wheels or suspension) __________________ Racecar spelled backwards is Racecar, because Racecar.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turn as tail timing not matching with the front turn signals	NahumCC	Cosmetic Modification (Interior/Exterior/Lighting)	1	01-03-2016 11:40 PM
Steering wheel issue---left turn lighter than right turn!!!	xingxingtjf	Issues \| Warranty \| Recalls / TSB	12	10-14-2015 07:47 PM
Rattle when i turn off the engine	Subforever	Issues \| Warranty \| Recalls / TSB	11	08-18-2015 02:22 PM

12-07-2016, 05:52 PM	#4
VIP BRZ Senior Member Join Date: Mar 2016 Drives: 2014 Subaru BRZ Location: CA - San Fernando Valley Posts: 491 Thanks: 242 Thanked 333 Times in 179 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	wait... how often do you need to turn off the car while your hazards are on? This sounds like a real minor inconvenience, just turn your engine off first and then activate the hazards.

12-07-2016, 06:21 PM	#6
dattran86 Driver Join Date: Aug 2016 Drives: 2013 Whiteout FRS Location: Toronto/GTA Posts: 539 Thanks: 427 Thanked 237 Times in 159 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Could have be a bad Ignition Switch? does the same thing happen without the Hazard light being on?

12-07-2016, 08:01 PM	#7
catsspat Member Join Date: Nov 2016 Drives: 2013 BRZ Premium MT Location: Las Vegas, NV Posts: 31 Thanks: 16 Thanked 31 Times in 14 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Are you by any chance using one of those cheap flasher modules (for avoiding hyperflashing with LED bulbs)? If so, try putting the stock flasher back in. Nonsense you say? When I first put LED bulbs and a cheap flasher, with everything off other than the hazards, I heard weird sound with something on the dash lighting up dimly. I'm thinking it was maybe the fuel pump. I immediately took that garbage out and picked up a Tap-turn module (Canadian). I opened up the cheap flasher module and found 9V relays in it. Garbage. In the end, there's really no reason to use one. You can just mod the stock one to work with LEDs. See http://www.ft86club.com/forums/showp...97&postcount=8

User Name		Remember Me?
Password