Raven blacked out side marker before and after

[Dadhawk]

Originally Posted by Roadstercycle

Calidrifter, they still reflect. In fact I had to turn the flash off to get the second picture because it would not show the black out, just the reflect. Very cool how the tint worked.

Are you saying then it is still Amber (or at least a shade of amber) when on/reflecting?

[Roadstercycle]

Dadhawk, yes it is, not as crazy brite like the first picture but still amber just subdue. It says on the can no more than 3 coats. I suggest go around the edges first than continue onto the flats. I realized after i did my 3 coats that I left some edge yellow and had to be careful not to over do the flats while I touched up the edges. Should have mentioned this earlier for other people.

[Dadhawk]

Originally Posted by Roadstercycle

Dadhawk, yes it is, not as crazy brite like the first picture but still amber just subdue. It says on the can no more than 3 coats. I suggest go around the edges first than continue onto the flats. I realized after i did my 3 coats that I left some edge yellow and had to be careful not to over do the flats while I touched up the edges. Should have mentioned this earlier for other people.

Thanks, I'd like to do mine red at some point for my Firestorm, but didn't want to violate whatever the current laws are, which require amber when lit.

[FrsSwag]

not bad... i like how it turned out