PTUNING Competition Turbo System V2 (version 2) - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Mrc@ptuning · 09-07-2016, 01:14 PM

Quote:

Originally Posted by ogrowup

I just did the upgrade to V2. It's amazing. Power band is much wider, the car just pulls forever, gobs of torque, makes great noises. 366hp at the wheel, 300ft lbs torque- on a 2800 lb car

I'm a happy dude.

We're glad you're happy with the new GT2867R V2 setup.

BassKeys88 · 09-08-2016, 09:42 PM

will this work with the ACE 250 Header? Is your discount over?

Ken@PTuning · 09-09-2016, 01:44 AM

Quote:

Originally Posted by BassKeys88

will this work with the ACE 250 Header? Is your discount over?

The turbo kit is designed to work with a stock style header (OEM or aftermarket). Unfortunately, the long tube header design of the ACE 250 header wouldn't work with our turbo kit.

The pre-order pricing ended on August 26th, however, I'm sure if you contact Freddy@PTUNING, he can work with you to get the best packaged pricing on the kit, install, etc.

Mrc@ptuning · 09-15-2016, 04:46 PM

Updated Post #3 above with complete pictures of kit content!

Sloww86 · 09-16-2016, 04:22 PM

Will this work with Borla UEL headers?

Ken@PTuning · 09-16-2016, 04:25 PM

Quote:

Originally Posted by Sloww86

Will this work with Borla UEL headers?

Yes it should.

Mrc@ptuning · 09-16-2016, 05:29 PM

Quote:

Originally Posted by Sloww86

Will this work with Borla UEL headers?

Yes, it will work with the Borla UEL. We've installed a few kits with this header.

skylinekin · 09-16-2016, 11:09 PM

What is the additional fitting on the new cobra intake pipe for? (Intake manifold side)

Mrc@ptuning · 09-17-2016, 10:24 AM

Quote:

Originally Posted by skylinekin

What is the additional fitting on the new cobra intake pipe for? (Intake manifold side)

Those fittings are for connecting the breather line from the top of the turbo oil sump to the intake tube.

skylinekin · 09-22-2016, 07:28 PM

Received the V2 upgraded "Cobra" intake today, very high quality piece as usual from PTuning. Looking forward to having strut braces again and keeping the intake temps down

Thanks Freddy!

brz11b · 09-23-2016, 12:25 AM

I'm realy liking this kit. I defiantly want a gtx kit but I'm not sure which one. maybe the gtx2871r since its the middle child of the gtx2867 and the gtx3071r.

When does full spool tend to be achieved with these turbos?
Will be stock motor with 93 and meth/water injection for a while. Eventually plant to go forged intervals in the long term.

Freddy@PTUNING · 09-23-2016, 10:19 AM

Quote:

Originally Posted by skylinekin

Received the V2 upgraded "Cobra" intake today, very high quality piece as usual from PTuning. Looking forward to having strut braces again and keeping the intake temps down

Thanks Freddy!

My pleasure!

Freddy@PTUNING · 09-23-2016, 10:24 AM

Quote:

Originally Posted by brz11b

I'm realy liking this kit. I defiantly want a gtx kit but I'm not sure which one. maybe the gtx2871r since its the middle child of the gtx2867 and the gtx3071r.

When does full spool tend to be achieved with these turbos?
Will be stock motor with 93 and meth/water injection for a while. Eventually plant to go forged intervals in the long term.

What are your power goals? I personally love the GTX2867. Full boost is around 4k for the 28 and around 5k for the 30. The GTX2871R would be somewhere in between.

brz11b · 09-23-2016, 11:47 AM

Quote:

Originally Posted by Freddy@PTUNING

What are your power goals? I personally love the GTX2867. Full boost is around 4k for the 28 and around 5k for the 30. The GTX2871R would be somewhere in between.

5k is to much lag time for me. I'd like to only be a runs 300whp or so on 93 but I also want to run meth.

Eventually I want to go higher but that's good for now.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PTUNING Spec-SS Turbo System with GTX2867R option	ptuning	Forced Induction	52	06-11-2018 10:25 AM
PTUNING: FR-S/BRZ/GT86 Spec-SS Turbo System (Now Shipping)	ptuning	Forced Induction	151	09-23-2016 11:48 AM
PTUNING Equal-Length Competition Header	RJasonKlein	Engine, Exhaust, Bolt-Ons	5	07-07-2016 01:43 AM
PTUNING: 501WHP 377WTQ 20psi Stock Motor PTUNING Spec-SS GTX3076R Turbo System	ptuning	Forced Induction	47	06-16-2014 04:52 PM

09-08-2016, 09:42 PM	#44
BassKeys88 Member Join Date: Jun 2016 Drives: 13' FRS Location: Asheville, NC Posts: 26 Thanks: 6 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	will this work with the ACE 250 Header? Is your discount over?

09-15-2016, 04:46 PM	#46
Mrc@ptuning Senior Member Join Date: Dec 2011 Drives: S1000RR Location: Manassas, VA Posts: 441 Thanks: 246 Thanked 520 Times in 218 Posts Mentioned: 53 Post(s) Tagged: 0 Thread(s)	Updated Post #3 above with complete pictures of kit content!

09-16-2016, 04:22 PM	#47
Sloww86 Junior Member Join Date: Sep 2016 Drives: Argento FRS Location: DMV Posts: 8 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Will this work with Borla UEL headers?

09-16-2016, 11:09 PM	#50
skylinekin Senior Member Join Date: Jul 2013 Drives: 22 GR86, 13 FRS, 15 BRZ, 13 FRS Location: SE Michigan Posts: 368 Thanks: 44 Thanked 70 Times in 48 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	What is the additional fitting on the new cobra intake pipe for? (Intake manifold side)

09-22-2016, 07:28 PM	#52
skylinekin Senior Member Join Date: Jul 2013 Drives: 22 GR86, 13 FRS, 15 BRZ, 13 FRS Location: SE Michigan Posts: 368 Thanks: 44 Thanked 70 Times in 48 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Received the V2 upgraded "Cobra" intake today, very high quality piece as usual from PTuning. Looking forward to having strut braces again and keeping the intake temps down Thanks Freddy!

09-23-2016, 12:25 AM	#53
brz11b Senior Member Join Date: Jan 2016 Drives: United States Location: cheeseburger Posts: 250 Thanks: 56 Thanked 56 Times in 34 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I'm realy liking this kit. I defiantly want a gtx kit but I'm not sure which one. maybe the gtx2871r since its the middle child of the gtx2867 and the gtx3071r. When does full spool tend to be achieved with these turbos? Will be stock motor with 93 and meth/water injection for a while. Eventually plant to go forged intervals in the long term.

User Name		Remember Me?
Password