OFT - Example alternate maps for AT, 98RON, E85, MAF Scales

[drift86]

Hey Wayno. Do your latest maps include the latest changes Shiv made to the UEL tunes from this thread? http://www.ft86club.com/forums/showthread.php?t=98151

Thanks again for your contributions to the community.

[Wayno]

Originally Posted by drift86

Hey Wayno. Do your latest maps include the latest changes Shiv made to the UEL tunes from this thread? http://www.ft86club.com/forums/showthread.php?t=98151

Thanks again for your contributions to the community.

My examples have included shiv's new UEL AVCS for the last 3 months since he released the beta to people.

Mine have included proper load limits (what shiv refers to as bogging under 2500 rpm because he removed the load limits on all the US cars) for probably 8 months.

There's no timing changes for 98RON as a result of any new OTS maps as you can't just throw 4 degrees of extra timing at 98RON and lean up WOT 3 points like he is doing for their 94 AKI.

Besides the new AVCS tables, there's nothing really new in those OFH maps that someone couldn't have done by themselves over a couple of weeks on the street.

[Ondreiko]

Hi!
I desperately need some advise on romraider: when i compare my oft rom (A02G) with Wayno's A01G rich rom v 100, i got message that 34 tables are missing, including per injector pulse width compensation A-H tables, engine load limit B and C tables etc and some CEL codes missing too.
I have retried various OTS release definition files, but still there are 34 tables missing between 01G and my 02G (modifyed or pure OTS)
Can someone advise what did i do wrong except wrong .xml file (which i honestly tried first)?

So my A02G rom contains less tables than yours and than OFT OTS OFH usdm mt rom. cant even imagine wtf.

[Rezi]

Use Wayno's definitions on page 1

[Ondreiko]

Originally Posted by Rezi

Use Wayno's definitions on page 1

That's what i did for Wayno's table, but there was no definitions for my cal id A02G

[Ondreiko]

So seems there are just appropriate extended .xml file for my cal id has not issued yet. i didnot find it at least. So my main concern - will everything work correctly if i copy that Wayno's tables i can see and leave the missing tables (specially load limits) as it is?

[steve99]

Originally Posted by Ondreiko

So seems there are just appropriate extended .xml file for my cal id has not issued yet. i didnot find it at least. So my main concern - will everything work correctly if i copy that Wayno's tables i can see and leave the missing tables (specially load limits) as it is?

OFT A02G tuned rom is actually ans A01G rom internally.

wayno just added kodename74 defs to his posts, pretty sure kode has A02G rom defs. A01G and A02G defs are compatable.

[Kodename47]

Originally Posted by Ondreiko

So seems there are just appropriate extended .xml file for my cal id has not issued yet. i didnot find it at least. So my main concern - will everything work correctly if i copy that Wayno's tables i can see and leave the missing tables (specially load limits) as it is?

A01G and A02G types have the same definition. If you want the tables, take your A01G definition, open in notepad/wordpad and replace the ZA1JA01G with ZA1JA02G and then save as the new file type. Add definition to Romraider and away you go.

[Ondreiko]

Originally Posted by Kodename47

A01G and A02G types have the same definition. If you want the tables, take your A01G definition, open in notepad/wordpad and replace the ZA1JA01G with ZA1JA02G and then save as the new file type. Add definition to Romraider and away you go.

Great, mate! It is working now!!!

[Seph1r0th]

I'm having the same issue with the d00c tuned file using Wayno's defs. It says there are missing tables. Anyone know which xml file I should actually be using to edit?

Thanks

[Wayno]

Originally Posted by Seph1r0th

I'm having the same issue with the d00c tuned file using Wayno's defs. It says there are missing tables. Anyone know which xml file I should actually be using to edit?

Thanks

There's always going to be missing tables when comparing between years and different markets.

What you really need to watch out for now is that openflash are replacing late MY cars with early MY calibration software.

[Hyperblue302]

Originally Posted by Wayno

There's always going to be missing tables when comparing between years and different markets.

What you really need to watch out for now is that openflash are replacing late MY cars with early MY calibration software.

Could this be a good thing or bad thing, being I have a 16?

[Dru670]

it says "Invalid Attachment specified. If you followed a valid link, please notify the administrator" when I click on one of the UEL zip files.

[jxl00]

any tips on where to begin tuning? wayno's faq seems a little complicated. I have downloaded his 4/27 definitions. My target is the BOOD calibration for stage 1 93 oct from OFT, and the source is the AO1I bin that wayno uploaded. Am I doing it right? Which tables are best to copy first? which have the best bang for the buck. can I copy from the Ao1I calibration even though its different than mine?