Video: Just installed Invidia N1 + Catless Frontpipe - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

EsoBOFH · 04-18-2016, 02:06 PM

Just picked up a lightly-used Invidia N1 and catless front-pipe.

Did the install this saturday, which was fairly straight forward despite breaking a stud on the over-pipe. Apparently breaking the stainless studs like this happens fairly commonly. I was fortunate to be in my friends shop at the same time as their shop manager, who was well experienced with exhaust installs.

We cut the studs off with a torch, and then pounded the remaining stud pieces out with a pneumatic chisel to clear the flange holes. The front-pipe/over-pipe connection is now just nut & bolt so it should be easier to do future exhaust mods (new OP + UEL header). It sounds beastly!!!!

humfrz · 04-18-2016, 02:30 PM

Nice growl to it ......

Does it drone at speed .... ??

humfrz

EsoBOFH · 04-18-2016, 03:19 PM

Quote:

Originally Posted by humfrz

Does it drone at speed .... ??humfrz

If i'm travelling at say 100km/h (60mph) and I have cruise on, it's actually very quiet. I can talk normally, and listen to music. If I take the gas off and decelerate below 3000km it's very droning. Level pedal, constant speed above 3000 is very nice. Acceleration into the higher revs sounds amaze balls!!

Songha · 04-18-2016, 03:53 PM

I love the setup so far as well, plan on going UEL Tomei headers and over pipe next accompanied with the oft. I have a video as well.

Cold starts can be ridiculous.

EsoBOFH · 04-18-2016, 04:28 PM

Quote:

Originally Posted by Songha

I plan on going UEL Tomei headers and over pipe next accompanied with the oft.

Gruppe-S UEL (same as tomei) and EcuTek tune happening on Saturday @ the Drift Office in Washington

- i'll post a vid of the results and sound difference!

BertoFT · 04-21-2016, 08:42 PM

I too have the Nvidia N1, but stock overpipe. I am also looking into getting the gruppe-s uel headers! I'll be eagerly waiting for your updates

Sent from my Nexus 6P using Tapatalk

FRSBRZGT86FAN · 04-21-2016, 08:52 PM

Quote:

Originally Posted by BertoFT

I too have the Nvidia N1, but stock overpipe. I am also looking into getting the gruppe-s uel headers! I'll be eagerly waiting for your updates

Sent from my Nexus 6P using Tapatalk

lol why is everyone calling it Nvidia, it's Invidia, nvidia makes dope gpus doe

BertoFT · 04-21-2016, 08:56 PM

I can't even blame it on my phone's autocorrect, because it defaults to Invidia, lol.

Sent from my Nexus 6P using Tapatalk

2016 Camaro SS · 04-22-2016, 10:53 AM

I'd run a catted FP if you plan on catless headers, otherwise you get a nasty low rpm rasp that sounds terrible with the N1.

vtmike · 04-22-2016, 11:03 AM

Quote:

Originally Posted by EsoBOFH

Gruppe-S UEL (same as tomei) and EcuTek tune happening on Saturday @ the Drift Office in Washington

- i'll post a vid of the results and sound difference!

It's going to be loud and raspy. I found my nameless 5" muffler axle back and catted front pipe to be too loud after going with catless jdl uel. Had to switch back to OEM axle back.

DJCarbine · 04-22-2016, 11:09 AM

Quote:

Originally Posted by vtmike

It's going to be loud and raspy. I found my nameless 5" muffler axle back and catted front pipe to be too loud after going with catless jdl uel. Had to switch back to OEM axle back.

It will be a lot more tame with a frontpipe that has a helmholtz resonator, MUCH less drone

DJCarbine · 04-22-2016, 11:10 AM

Quote:

Originally Posted by EsoBOFH

Gruppe-S UEL (same as tomei) and EcuTek tune happening on Saturday @ the Drift Office in Washington

- i'll post a vid of the results and sound difference!

Prepare for loud

ajcarson11 · 04-22-2016, 01:50 PM

Prepare for VERY loud with a catless front pipe. If you at all dislike the drone now, then you're in for a surprise. It'll be intensely loud. Consider throwing stock frontpipe back on if going UEL catless.

Just a heads up from a guy with Gruppe-S, stock OP, stock FP, and a quiet-ish catback.

thecarfilmer · 04-24-2016, 12:29 AM

I have the same setup and I love it

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
catless header vs catless frontpipe	steveholt	Engine, Exhaust, Transmission	30	10-10-2017 08:13 PM
Tomei 80 + Catless Frontpipe	gatorbushmen	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	3	12-15-2015 06:56 AM
Nvidia catless front pipe for auto?	xcooperx	Engine, Exhaust, Transmission	5	10-05-2015 06:46 PM
NY: Nvidia N1 Catback & Nvidia Catless downpipe	klittl06	Engine, Exhaust, Bolt-Ons	8	04-05-2015 12:15 PM
WTB Catless Invidia Frontpipe	tinma	Canada Classifieds	2	03-03-2015 03:54 PM

04-18-2016, 02:30 PM	#2
humfrz Senior Member Join Date: May 2013 Drives: 2013 FR-S, white, MT Location: Puyallup, WA Posts: 30,432 Thanks: 29,826 Thanked 32,845 Times in 16,844 Posts Mentioned: 715 Post(s) Tagged: 2 Thread(s)	Nice growl to it ...... Does it drone at speed .... ?? humfrz

04-18-2016, 03:53 PM	#4
Songha Senior Member Join Date: Jan 2016 Drives: 2013 Scion FRS Location: Warwick, RI Posts: 109 Thanks: 0 Thanked 55 Times in 33 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I love the setup so far as well, plan on going UEL Tomei headers and over pipe next accompanied with the oft. I have a video as well. Cold starts can be ridiculous.

04-21-2016, 08:42 PM	#6
BertoFT Member Join Date: Mar 2016 Drives: 13 FRS Firestorm Location: SC Posts: 53 Thanks: 28 Thanked 20 Times in 14 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I too have the Nvidia N1, but stock overpipe. I am also looking into getting the gruppe-s uel headers! I'll be eagerly waiting for your updates Sent from my Nexus 6P using Tapatalk

04-21-2016, 08:56 PM	#8
BertoFT Member Join Date: Mar 2016 Drives: 13 FRS Firestorm Location: SC Posts: 53 Thanks: 28 Thanked 20 Times in 14 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I can't even blame it on my phone's autocorrect, because it defaults to Invidia, lol. Sent from my Nexus 6P using Tapatalk

04-22-2016, 10:53 AM	#9
2016 Camaro SS Senior Member Join Date: Nov 2014 Drives: Fast Location: Austin, Texas Posts: 790 Thanks: 114 Thanked 408 Times in 241 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	I'd run a catted FP if you plan on catless headers, otherwise you get a nasty low rpm rasp that sounds terrible with the N1.

04-22-2016, 01:50 PM	#13
ajcarson11 Senior Member Join Date: Jun 2015 Drives: 2013 Subaru BRZ Limited (Black) Location: Indianapolis Posts: 511 Thanks: 253 Thanked 206 Times in 149 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Prepare for VERY loud with a catless front pipe. If you at all dislike the drone now, then you're in for a surprise. It'll be intensely loud. Consider throwing stock frontpipe back on if going UEL catless. Just a heads up from a guy with Gruppe-S, stock OP, stock FP, and a quiet-ish catback.

User Name		Remember Me?
Password