What lugs should I use?

[Ashikabi]

Originally Posted by PandaSPUR

These weigh a freaking ton and there's a taper to the allen key slot on the head. Compared to the authentics which do not have that taper.

Well it hasnt been 180 days yet, so paypal dispute has been opened. I'm just glad I never put these on my car.

Hope it works out for you

[[|=(86)=|]]

[why?]

Originally Posted by ARTBRZ

Based on reviews and recommendation from discount tire, I would not recommend any aluminum lug nuts because they tend to break. I have gorilla lug nuts.

Originally Posted by Ashikabi

For anyone else seeing this thread I can confirm aluminum lugs are shit, they will seize and then break

bla bla bla. Cheap anything sucks. Stop spreading flat out lies. I've had a set of Rays duraluminum lugs on my Yaris for 8 years with zero problems from abusive jackasses that use guns on them. You get what you pay for.

Originally Posted by Ashikabi

You don't "need" locks but it's a good idea. Make sure the lugs are skinny enough to fit in your lug wells and are the right thread. DO NOT use stock lugs on aftermarket wheels or aftermarket lugs on stock wheels

Except on Subaru's you actually could, since they are the same type of lug nut aftermarket wheels use.

[Ashikabi]

Originally Posted by why?

bla bla bla. Cheap anything sucks. Stop spreading flat out lies. I've had a set of Rays duraluminum lugs on my Yaris for 8 years with zero problems from abusive jackasses that use guns on them. You get what you pay for.



Except on Subaru's you actually could, since they are the same type of lug nut aftermarket wheels use.

Well last I checked GReddy was a reputable company and I never once used an impact on them. Guess what? They broke. Maybe my set was bad. I don't know. That was my experience and that's what I'm going to tell people.