Drag setup - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

dallenj · 01-20-2016, 07:16 PM

I have been looking for awile for a proper drag wheel set up for this car and it seems that no one makes them. I would like to avoid custom made wheels but I'm not finding anything. BTW looking for skinies in the front and wide in the back. Let me know if this wheel set up exist on this car.

wise345 · 01-20-2016, 08:50 PM

Quote:

Originally Posted by dallenj

I have been looking for awile for a proper drag wheel set up for this car and it seems that no one makes them. I would like to avoid custom made wheels but I'm not finding anything. BTW looking for skinies in the front and wide in the back. Let me know if this wheel set up exist on this car.

How much power are you putting down?

dallenj · 01-20-2016, 09:02 PM

Quote:

Originally Posted by wise345

How much power are you putting down?

Not sure exactly how much I'll be running. Probably around 300 hp and 300+ torque. Im spinning way to much right now and im adding more power.i have my factory wheels with nitto NTO1s on the rear. Plan on going 9 inch in the back.

wise345 · 01-20-2016, 09:34 PM

Quote:

Originally Posted by dallenj

Not sure exactly how much I'll be running. Probably around 300 hp and 300+ torque. Im spinning way to much right now and im adding more power.i have my factory wheels with nitto NTO1s on the rear. Plan on going 9 inch in the back.

I wouldn't worry about a set of drag wheels in our cars until 500+whp. Id get as a wide a wheel as possible but keep it light, and stick a stick tire (Nitto R888 is a good one) should hook just fine

dallenj · 01-20-2016, 10:10 PM

Quote:

Originally Posted by wise345

I wouldn't worry about a set of drag wheels in our cars until 500+whp. Id get as a wide a wheel as possible but keep it light, and stick a stick tire (Nitto R888 is a good one) should hook just fine

Not really too concerned with the rear wheels but I need to find some skinies for this car. Thats why I made this post

wise345 · 01-20-2016, 10:50 PM

Quote:

Originally Posted by dallenj

Not really too concerned with the rear wheels but I need to find some skinies for this car. Thats why I made this post

Gotcha. Yeah I got no ideas on that one. Maybe post in the sub section for racing?
Doesn't specify drag racing but I'm sure they could be of help

spitfire481 · 01-20-2016, 11:23 PM

A 17" Mickey Thompson et street radial should be more than enough for that power level

01-20-2016, 07:16 PM	#1
dallenj Senior Member Join Date: May 2013 Drives: Grey FR-S Location: OKC Posts: 157 Thanks: 5 Thanked 25 Times in 18 Posts Mentioned: 1 Post(s)	Drag setup I have been looking for awile for a proper drag wheel set up for this car and it seems that no one makes them. I would like to avoid custom made wheels but I'm not finding anything. BTW looking for skinies in the front and wide in the back. Let me know if this wheel set up exist on this car.

01-20-2016, 11:23 PM	#7
spitfire481 Senior Member Join Date: Mar 2013 Drives: 2JZ FRS Location: Pure Automotive Performance Posts: 1,378 Thanks: 97 Thanked 1,354 Times in 621 Posts Mentioned: 27 Post(s)	A 17" Mickey Thompson et street radial should be more than enough for that power level __________________ Pure Automotive Performance MoTeC Build Thread @spitfire481

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drag racing setup help	oSoSlow	Tracking / Autocross / HPDE / Drifting	6	08-15-2015 11:20 PM
June 7th after Perrin meet drag racing at Portland Raceway or watch us drag!	stockysnail	Northwest	15	06-08-2014 01:08 PM
(Back up!) FS in FL: Drag DR-31 17x9" Square setup 5x100 (or 5x114.3) +38	Kido1986	Wheels and Tires	5	01-10-2013 03:21 PM
FS in FL: Drag DR-31 17x9" Square setup 5x100 (or 5x114.3) +38	GTB/ZR-1	Wheels and Tires	1	12-06-2012 07:22 AM
Brz Drag Setup	Tansey86	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	14	09-12-2012 11:24 AM

User Name		Remember Me?
Password