In for the long haul Ultimate NA build thread. - Page 26 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

celek · 12-14-2015, 03:27 PM

Quote:

Originally Posted by cyde01

That sounds awesome but how streetable or daily driver friendly would those cams be? Would you have crazy idling?

Not with The electronic variable valve timing

cyde01 · 12-14-2015, 05:02 PM

Quote:

Originally Posted by celek

Not with The electronic variable valve timing

so no downsides to daily street use at all? what would be the reasoning for anyone going with the fast road or ultimate road as opposed to the race cam?

MaximeT · 12-14-2015, 05:17 PM

The race cam lift will give you more pumping loses which is bad for fuel economy.

celek · 12-14-2015, 07:15 PM

Quote:

Originally Posted by cyde01

so no downsides to daily street use at all? what would be the reasoning for anyone going with the fast road or ultimate road as opposed to the race cam?

Only downside is valve to piston clearance. The longer they are open more chance of interference. Stock pistons probably wont work on every cam. Even HKS says you can not use their cam with stock pistons, they say you should buy the high capacity kit.

sato · 12-14-2015, 10:59 PM

But don't we have chains instead of belts for timing? Maybe a noob like me can't think of interference screwing up something else (please elaborate)

Sent using tapatalk

Spartarus · 12-15-2015, 10:11 AM

Quote:

Originally Posted by sato

But don't we have chains instead of belts for timing? Maybe a noob like me can't think of interference screwing up something else (please elaborate)

Sent using tapatalk

Not that interference problem. Interference as in piston hitting valve during normal operation, necessitating a different piston design with more clearance. New pistons = more cash.

Other issues include losing much/most of your VVT adjustability range due to the same issue, again necessitating new pistons.

Summerwolf · 12-15-2015, 10:43 AM

There will be a steep learning curve with VVT and those cams, but I'm glad someone is bringing an "affordable" cam option to market. Also with a cam upgrade there can be more progress made in the FI arena as well, suiting cams to your power adder since they say custom grinds are available. The base minimum for those cams are bigger than stock so you would have to lose a portion of idle quality and general drivability but with tuning obviously that can be controlled to an extent.

Now I know we have custom piston options for Piston to valve clearance, but do we many options for better valves, retainers and valve springs to take advantage of those cams?

Summerwolf · 12-15-2015, 10:45 AM

1059.58 currently for the set of four cams..... wow.

Gear_One_Performance · 12-15-2015, 11:09 AM

Making power NA is always so much more expensive, but much more satisfying.

Summerwolf · 12-15-2015, 11:21 AM

Serious question, has anyone tuned with bigger camshafts in the FA20 yet? I did some google work and didn't find anything. The custom cam profiles caveat is interesting.

celek · 12-15-2015, 04:35 PM

Quote:

Originally Posted by Summerwolf

There will be a steep learning curve with VVT and those cams, but I'm glad someone is bringing an "affordable" cam option to market. Also with a cam upgrade there can be more progress made in the FI arena as well, suiting cams to your power adder since they say custom grinds are available. The base minimum for those cams are bigger than stock so you would have to lose a portion of idle quality and general drivability but with tuning obviously that can be controlled to an extent.

Now I know we have custom piston options for Piston to valve clearance, but do we many options for better valves, retainers and valve springs to take advantage of those cams?

Piper has Springs and retainers as well as a few other companies. the problem area is coil bind if the springs do not support the larger lobe as well.

High RPM is going to need a higher spring pressure as well for High RPM and valve float.

celek · 12-15-2015, 04:36 PM

Quote:

Originally Posted by Summerwolf

Serious question, has anyone tuned with bigger camshafts in the FA20 yet? I did some google work and didn't find anything. The custom cam profiles caveat is interesting.

Someone on my FB build page commented they had the 272's @Tim Radley has the street cams.

No one has released any gain numbers though.

solidONE · 12-15-2015, 05:58 PM

Quote:

Originally Posted by celek

Someone on my FB build page commented they had the 272's @Tim Radley has the street cams.

No one has released any gain numbers though.

They're going to swap the cams but not dyno the things.... ooookkkay

Hyper4mance2k · 12-15-2015, 07:24 PM

You should take that manifold and make a 4 barrel carb adapter.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Beginner STX Build Whiteout FRS Build Thread	Hachi86Roku	Tracking / Autocross / HPDE / Drifting	21	03-31-2020 08:52 PM
Ultimate coilover thread, What do you run on your car? got REVIEWS post it up!	THMotorsports.com	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	0	12-11-2013 06:25 PM
The ULTIMATE Exhaust Thread by ECS Motorsports! \| Over 2 Dozen Options! + FREE S&H!	AJ@ECSMotorsports	Engine, Exhaust, Bolt-Ons	27	09-05-2013 10:14 AM
--->>ULTIMATE COILOVER THREAD<<--- The Best Deals + Free Shipping	FT-86 SpeedFactory	Brakes, Suspension, Chassis	95	01-30-2013 08:48 PM
Who's in for the long haul?	Laika	BRZ First-Gen (2012+) — General Topics	47	07-09-2012 10:48 AM

12-15-2015, 10:43 AM	#357
Summerwolf Panda Trueno Join Date: Jan 2015 Drives: No twin now. Location: North Indiana Posts: 3,349 Thanks: 2,113 Thanked 2,409 Times in 1,332 Posts Mentioned: 17 Post(s) Tagged: 2 Thread(s)	There will be a steep learning curve with VVT and those cams, but I'm glad someone is bringing an "affordable" cam option to market. Also with a cam upgrade there can be more progress made in the FI arena as well, suiting cams to your power adder since they say custom grinds are available. The base minimum for those cams are bigger than stock so you would have to lose a portion of idle quality and general drivability but with tuning obviously that can be controlled to an extent. Now I know we have custom piston options for Piston to valve clearance, but do we many options for better valves, retainers and valve springs to take advantage of those cams?

12-15-2015, 10:45 AM	#358
Summerwolf Panda Trueno Join Date: Jan 2015 Drives: No twin now. Location: North Indiana Posts: 3,349 Thanks: 2,113 Thanked 2,409 Times in 1,332 Posts Mentioned: 17 Post(s) Tagged: 2 Thread(s)	1059.58 currently for the set of four cams..... wow.

12-15-2015, 11:09 AM	#359
Gear_One_Performance Senior Member Join Date: Mar 2015 Drives: 2014 BRZ SCCA STU endurance car Location: West Chester, Pennsylvania Posts: 199 Thanks: 2 Thanked 142 Times in 82 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	Making power NA is always so much more expensive, but much more satisfying.

12-15-2015, 11:21 AM	#360
Summerwolf Panda Trueno Join Date: Jan 2015 Drives: No twin now. Location: North Indiana Posts: 3,349 Thanks: 2,113 Thanked 2,409 Times in 1,332 Posts Mentioned: 17 Post(s) Tagged: 2 Thread(s)	Serious question, has anyone tuned with bigger camshafts in the FA20 yet? I did some google work and didn't find anything. The custom cam profiles caveat is interesting.

12-15-2015, 07:24 PM	#364
Hyper4mance2k Alexandrino_Auto Join Date: Apr 2014 Drives: series.Blue Location: Greater DMV Posts: 1,014 Thanks: 1,584 Thanked 636 Times in 377 Posts Mentioned: 10 Post(s) Tagged: 3 Thread(s)	You should take that manifold and make a 4 barrel carb adapter.

User Name		Remember Me?
Password