FT-86 SpeedFactory Diffuser by Verus - Complete Aero Solution

[VerusEric]

Originally Posted by 8R6

does this shipment also include the newer "tame" design? or is the "tame" version still in final prototyping phase? i love my driveway labs diffuser i got right now, but that new version is frikkin sick!

This shipment is tame version only. We have another aggressive production run going now as well though, that will be available sometime in early October I hope.

Thanks,
Eric

[8R6]

Originally Posted by NotEric6

This shipment is tame version only. We have another aggressive production run going now as well though, that will be available sometime in early October I hope.

Thanks,
Eric

sick!!! damn now i gotta wait for it to arrive in stock.

[Ammunition]

Originally Posted by NotEric6

I cannot find a Tomei 60S yet. Here is a single exit passenger side exhaust shot up close if it helps at all? Looking at under body pictures on google as well, it looks like it shouldn't have issues.

Thanks Eric! Mostly I'm concerned about the canister/muffler that hangs downward at an angle. Here are some images I have of it if it'll help confirm the clearance - http://imgur.com/a/vTCeb#0

Looking forward to more installed pics of the second version!

[R2RO]

Originally Posted by NotEric6

The alternate version only changes the strake design. We are looking into doing a Tomei Type-80 specific diffuser but it is currently only in the "Hey, how can we do this?" phase. Will update accordingly.

Definitely will buy one if you guys release a version in the future that supports us guys with the Tomei Type 80.

[jdnguyen]

So I was rear ended and my velox rear diffuser was damaged... my exhaust was damaged too.
Long story short, I went on a parts shopping spree ordering a replacement diffuser and exhaust along with many other things. Well, without even checking I ordered the Tomei type 80 and just now realized it does not fit with this diffuser....
Now its a question of what to do lol

[troek]

just return the exhaust, may loose a few bucks on shipping but its probably less than if you sell it 2nd hand even new still in the box.

[Roneezy]

Originally Posted by NotEric6

This shipment is tame version only. We have another aggressive production run going now as well though, that will be available sometime in early October I hope.

Thanks,
Eric

Will the tame version be about the same price as the aggressive version?

[VerusEric]

Originally Posted by Roneezy

Will the tame version be about the same price as the aggressive version?

Should be very similar.

I got everything packaged onto a pallet over the weekend in some nice 105-110 degree heat. It will be leaving Monday .

Thanks,
Eric

[nelsmar]

Originally Posted by NotEric6

Should be very similar.

I got everything packaged onto a pallet over the weekend in some nice 105-110 degree heat. It will be leaving Monday .

Thanks,
Eric

You forgot to mention the humidity... Damn this weekend was brutal!

[ck-GT86]

Originally Posted by NotEric6

Should be very similar.

I got everything packaged onto a pallet over the weekend in some nice 105-110 degree heat. It will be leaving Monday .

Thanks,
Eric

So.... We can buy them, when?

[VerusEric]

Originally Posted by ck-GT86

So.... We can buy them, when?

Later this week? As soon as FT-86 SpeedFactory adds them to the website would be my guess. They shouldn't run out for awhile .

Thanks,
Eric

[Xuningshen]

oh gosh that is exactly what I was hoping for, Thanks Eric!!

I saw this diffuser in person finally at subiefest and my worries were confirmed with the original design. The one i saw, it looked like the strakes had been bent and where then "rebent" back to try and get them straight. I'm assuming people have either walked into it or something when unloading and loading crap in, so once this new one gets on the website i'm ordering it!!

[VerusEric]

Originally Posted by Xuningshen

oh gosh that is exactly what I was hoping for, Thanks Eric!!

I saw this diffuser in person finally at subiefest and my worries were confirmed with the original design. The one i saw, it looked like the strakes had been bent and where then "rebent" back to try and get them straight. I'm assuming people have either walked into it or something when unloading and loading crap in, so once this new one gets on the website i'm ordering it!!

I've only heard of one person with this issue and it's due to his ride height being so low it scrapes and hits on the ground which is something I can't really control. Regardless, we have two styles available now and people can decide what look they want .

[HATED1]

@NotEric6 Im ready and waiting As soon as i get it i will post pics and such on here and our Facebook!