08-27-2015, 04:40 PM | #1597 |
Join Date: Jan 2012
Drives: 2013 "AVO Orange" FR-S
Location: Seattle, WA
Posts: 1,067
Thanks: 69
Thanked 2,277 Times in 636 Posts
Mentioned: 108 Post(s)
Tagged: 2 Thread(s)
|
On 98 octane (which is about 94 octane in american standard) you should be fine running up to 8psi on the standard setup with an e-tune. WHP is typically between 260-290whp in that setup. With the Fensport tune you should be good.
|
The Following User Says Thank You to AVOturboworld For This Useful Post: | Jonde875 (08-30-2015) |
08-28-2015, 05:55 PM | #1598 |
Member
Join Date: May 2015
Drives: GT86
Location: Finland
Posts: 74
Thanks: 44
Thanked 5 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 1 Thread(s)
|
So it will be around 300-330hp on engine does it hold all that inside easily?
|
08-28-2015, 05:57 PM | #1599 |
Join Date: Jan 2012
Drives: 2013 "AVO Orange" FR-S
Location: Seattle, WA
Posts: 1,067
Thanks: 69
Thanked 2,277 Times in 636 Posts
Mentioned: 108 Post(s)
Tagged: 2 Thread(s)
|
I'm still on the original kit we fit 3 years ago, and have done about 44,000 miles without issue! You should be fine!
|
The Following 3 Users Say Thank You to AVOturboworld For This Useful Post: |
08-28-2015, 06:18 PM | #1600 | |
Senior Member
Join Date: Aug 2013
Drives: None
Location: Tx
Posts: 1,271
Thanks: 1,269
Thanked 141 Times in 121 Posts
Mentioned: 6 Post(s)
Tagged: 1 Thread(s)
|
Quote:
Sent from my LG-D850 using Tapatalk |
|
The Following User Says Thank You to Astroboy For This Useful Post: | Draco_PR23 (08-31-2015) |
08-28-2015, 06:21 PM | #1601 | ||
Member
Join Date: May 2015
Drives: GT86
Location: Finland
Posts: 74
Thanks: 44
Thanked 5 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 1 Thread(s)
|
Quote:
I give an update when I get things go further! Quote:
|
||
08-31-2015, 04:38 PM | #1602 |
Fiebru
Join Date: Aug 2012
Drives: Scion FR-S and Integra Type R
Location: West, Puerto Rico
Posts: 477
Thanks: 1,386
Thanked 284 Times in 208 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
|
@protpibe
How been your experience with WMI so far? Since I dont E85 in my area, I am considering it.
__________________
Current Cars:
2017 White Platinum Ford Fiesta ST 2013 Raven Scion FR-S 2012 Spruce Mica Toyota Tacoma TRD Off-Road 2000 Phoenix Yellow Acura Integra Type R |
08-31-2015, 05:12 PM | #1603 | |
Senior Member
Join Date: Oct 2013
Drives: 4-Runner Sport - 13' BRZ SportTech
Location: Winnipeg
Posts: 1,395
Thanks: 253
Thanked 839 Times in 459 Posts
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
|
Quote:
__________________
Top Tier Imports - Check out my build journal HERE
|
|
The Following 2 Users Say Thank You to protpibe For This Useful Post: | Astroboy (08-31-2015), Draco_PR23 (08-31-2015) |
09-01-2015, 11:55 AM | #1604 |
Member
Join Date: Jun 2013
Drives: CBS BLACK 2013 Subaru BRZ
Location: St.John's, Portland, OR.
Posts: 12
Thanks: 3
Thanked 2 Times in 2 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
oil change amounts
I have a dumb question for anyone that would like to help . how much oil do i use after i have changed the oil . Now that I have the AVO Kit on my car.
|
09-01-2015, 12:10 PM | #1605 | |
Senior Member
Join Date: Oct 2013
Drives: 4-Runner Sport - 13' BRZ SportTech
Location: Winnipeg
Posts: 1,395
Thanks: 253
Thanked 839 Times in 459 Posts
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Depends if you have an oil cooler or not. I usually put in 5.5L
__________________
Top Tier Imports - Check out my build journal HERE
|
|
09-01-2015, 12:17 PM | #1606 |
Member
Join Date: Jun 2013
Drives: CBS BLACK 2013 Subaru BRZ
Location: St.John's, Portland, OR.
Posts: 12
Thanks: 3
Thanked 2 Times in 2 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
I was told that because of the added spaces from the reservoir that now it take 2 extra quarts. and no oil cooler
|
09-01-2015, 12:29 PM | #1607 |
Member
Join Date: Jun 2013
Drives: CBS BLACK 2013 Subaru BRZ
Location: St.John's, Portland, OR.
Posts: 12
Thanks: 3
Thanked 2 Times in 2 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
|
09-01-2015, 12:52 PM | #1608 | |
Senior Member
Join Date: Oct 2013
Drives: 4-Runner Sport - 13' BRZ SportTech
Location: Winnipeg
Posts: 1,395
Thanks: 253
Thanked 839 Times in 459 Posts
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Wow don't put 2 quarts in lol. On initial install, you'll have to add a bit of oil, but the amount of oil you will put in on an oil change will be almost the same since the reservoir and turbo won't drain into the pan when the car shuts off.
__________________
Top Tier Imports - Check out my build journal HERE
|
|
The Following User Says Thank You to protpibe For This Useful Post: | Draco_PR23 (09-01-2015) |
09-01-2015, 04:33 PM | #1609 |
Member
Join Date: Jun 2013
Drives: CBS BLACK 2013 Subaru BRZ
Location: St.John's, Portland, OR.
Posts: 12
Thanks: 3
Thanked 2 Times in 2 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Thanks man, that was a big help!
|
The Following User Says Thank You to nopocrakr For This Useful Post: | Draco_PR23 (09-01-2015) |
09-02-2015, 08:54 AM | #1610 |
Member
Join Date: Feb 2014
Drives: 13' AVO Whiteout
Location: Maryland
Posts: 93
Thanks: 3
Thanked 34 Times in 26 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Got the ultra quiet resonator welded in which helped a bit, but it's still too loud for my liking with the evo3.. so I'm currently getting a magnaflow racemuffler put in right before the bottle resonator. Hoping this #killsthedrone.
Other than that I replaced the turbo to reservoir line with a high temp double wall silicone 5/8th hose and got much wider clamps. I then bought a two pack of DEI protect a boot sleeves, cut one in half and put it around the hose before installing (they can withstand direct heat of 1200F). Hopefully no more seepage - nothing catastrophic yet so I'm going to keep holding my breath. Lastly the rattling noise! So I found a few things around the engine bay which I thought were source of the rattle, removed the overpipe heatshield, removed a bracket by the windshield wiper tank that wasn't connected to anything but was touching a charge pipe, found that the oil dipstick could be the real issue all along as its touching another charge pipe and could vibrate. I wrapped it in a lot of tape to see if it went away and it sadly did not. I also put unused hose on the turbo reservoir breather neck to keep it from directly touching another charge pipe as well as flattened out the radiator brace that's right next to it. No dice by adjusting anything listed. Soo, the hunt continues.. The rattle comes between 2300-2800rpm, and is coming from the front driver side. Seems to not be present when the car is cold (or atleast is much more quiet). The rattle intensifies to a point after the car is warm. The noise sounds exactly like a heatshield being tapped on with something metallic. Just can't pinpoint it.. If I'm barely on the throttle at between those rpms the noise gets louder, but if I increase the throttle just barely it goes away completely. Can't replicate in neutral either.. Any ideas? |
|
|
Tags |
avo, avoturboworld |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Innovate (Sprintex) Supercharger Owners Topic | DarrenDriven | Forced Induction | 9139 | 12-29-2023 10:58 PM |
FA20Club Turbo Kit Owners Topic | pixel67 | Forced Induction | 1531 | 09-09-2014 12:36 PM |
OFF TOPIC: Spotted a Gallardo | markmatley | Hawaii | 4 | 02-24-2013 04:26 PM |
Not another need to drive topic | Sargy | Mid-Atlantic | 5 | 11-27-2012 12:18 PM |
Can you close the topic please? | Standardsuspension | Brakes, Suspension, Chassis | 14 | 06-26-2012 05:14 PM |