Full throttle Electric Supercharger Build Thread

[LucidMomentum]

Alright everyone, I know have @tyrantcf's ESC and OFT in my posession, so before I start doing the install tomorrow, do I need a special tune on the OFT if I'm just using the on/off pedal switch for now? Does the stage 1 tune work with the ESC? The only mods I have are a TRD Exhaust.

[KoolBRZ]

Originally Posted by LucidMomentum

Alright everyone, I know have @tyrantcf's ESC and OFT in my posession, so before I start doing the install tomorrow, do I need a special tune on the OFT if I'm just using the on/off pedal switch for now? Does the stage 1 tune work with the ESC? The only mods I have are a TRD Exhaust.

Congratulations! Don't use stg 1 tunes, they can't handle the pressure and timing changes. Download the OFT ESC tunes from the OFT website. Remember, you have to click on site map to find the current downloads. I'm still testing changes to the OFT map, but they work pretty good. I can't change them very much, before I've gone too far. I'm also adding @Wayno's additions to my tunes except for pressure and timing related tables.

[KoolBRZ]

Originally Posted by Sojhinn

Tried helping @j_Zer0 today with his procede install through text messages. We got everything running except the procede doesn't seem to be sending voltage to the phantom.

Anyone have a suggestion? All the Taps look good and the box is moving on the procede software.




Sent from my iPhone using Tapatalk

Is the ESC getting power to the readout? Can he take a picture of the battery and ESC controller connections?

[Sojhinn]

He's reconnected the foot switch and its fine. So it looks like voltage isn't coming out of the procede


Sent from my iPhone using Tapatalk

[KoolBRZ]

Does he have the 4 wire foot switch? If so, he needs to connect the Procede black wire to the foot switch connector's red wire.

[KoolBRZ]

Also, if the RPM tap isn't working, it will show movement sideways, but not up and down, and the ESC won't boost. Does the Procede show RPM's moving up and down?

[GT86meMR2]

Is It possible to post an updated list? Just to know somewhat when It's our turn so i know around what Time It's Time to pay for It :p

[gtfapollo]

Blaze it!

[Sojhinn]

Originally Posted by KoolBRZ

Also, if the RPM tap isn't working, it will show movement sideways, but not up and down, and the ESC won't boost. Does the Procede show RPM's moving up and down?

Yes to the four wire connector and yes to all the movement.

No dice still. That's why I decided to ask since it was unlike anything else I have helped with.


Sent from my iPhone using Tapatalk

[LucidMomentum]

Originally Posted by KoolBRZ

Congratulations! Don't use stg 1 tunes, they can't handle the pressure and timing changes. Download the OFT ESC tunes from the OFT website. Remember, you have to click on site map to find the current downloads.

That's the one for the ESC + OFH, right? I don't have the header so I was wondering if I should go with that one or the Stage 1 tune. Thanks for the head's up!

Originally Posted by KoolBRZ

My rule of thumb is "mild acceleration/cruise up to 2500 RPMs, with almost no boost, and real acceleration/showing off with up to full boost from about 3500 RPMs on up. I can send you what I have so far. What is your CAL ID? I hope it's A00D, otherwise I'll need to change like 20+ tables. I took the stage 2 91 Oct ESC tune, added @Wayno's additions, (except timing), massaged the AVCS normal and safe tables a bit, and called it good.

Also I just found out last night when I read the ECU and such that my CAL ID is D00D. Hope that doesn't make it too much of a pain to get a version of your a/t tunes for the OFT and Procede?

[j_Zer0]

Originally Posted by Sojhinn

Yes to the four wire connector and yes to all the movement.

No dice still. That's why I decided to ask since it was unlike anything else I have helped with.


Sent from my iPhone using Tapatalk

Technically, I have a three wire connector. Wires are black, red and orange.

[j_Zer0]

Originally Posted by j_Zer0

Technically, I have a three wire connector. Wires are black, red and orange.

Looks like I got a bad Procede unit. Yesterday I was getting data but no boost. Today the Procede won't even go online. Reaching out to the guys at Open Flash.

[KoolBRZ]

Originally Posted by LucidMomentum

That's the one for the ESC + OFH, right? I don't have the header so I was wondering if I should go with that one or the Stage 1 tune. Thanks for the head's up!






Also I just found out last night when I read the ECU and such that my CAL ID is D00D. Hope that doesn't make it too much of a pain to get a version of your a/t tunes for the OFT and Procede?

I'll send you a PM when it's ready.

[KoolBRZ]

Originally Posted by j_Zer0

Looks like I got a bad Procede unit. Yesterday I was getting data but no boost. Today the Procede won't even go online. Reaching out to the guys at Open Flash.

Sounds like you have some loose connections, unless you soldered them. You're sure the Procede black wire is connected to the ESC to foot switch connector red wire, right? If the Procede is unresponsive you may have a bad power or ground connection.
I used the included wiretaps, but first I stripped back the insulation, then I squirted some dielectric tune-up grease into the tap's metal bits to prevent oxidation ruining the connections. Then I crimped them down hard with pliers till they clicked.