NW Marketplace v1.0 (CLOSED)

[Bakchoii]

LF> Stock mid pipe cause apparently the axleback I'm getting and the midpipe that comes with the trd catback isn't going to work out

[Touge_ninja]

Originally Posted by Sammakko

where in seattle are you? i'd take them off your hands, before they end up in the dumpster!

South seattle. I can meet you at southcenter

[DoomsdayJesus]

Anyone interested in a set of brand spanking new stock taillights and light bar? They have about 15 miles on them and are in perfect condition. I'm fine with selling them separately. Just hoping to avoid the hassle of using ebay.

Looking to get $150 each for the taillights, $120 for the light bar, or $390 for the set.

[Ragua007]

Perrin oil cap and filter cover. No damage. $80 for both

@Dvipercop Are you willing to part with just the filter cover for $40? I already have the oil cap.

[Dvipercop]

Originally Posted by Ragua007

Are you willing to part with just the filter cover for $40? I already have the oil cap.

I have two people ahead of you interested in buying both. If those fall through, I may part with them separately.

[Jman1759]

Radium Engineering Dual Catch Can Kit; PCV line and Crankcase $350

Rage Powersports Race Ramps (Heavy duty honeycomb plastic with a 4,400 lb. capacity, Loads at a 9.05 degree angle (27" long) up to 3" high.) $30

Works by Lloyd Embroidered Floor Mats (black on black, all 4) $60

[TimmyC]

Originally Posted by Jman1759

Still available:

Supercharger stuff!!
Vortech V3 Supercharger kit (6,500 miles) New Gates Racing Belt, and Vortech fluid kit $4,000

Perrin Thermostatic Oil Cooler Kit $600, now $500
Radium Engineering Dual Catch Can Kit; PCV line and Crankcase $350, now $325
Koyo Aluminum Racing Radiator $250, now $225

Suspension, Brakes, and Wheels:
HKS Hipermax IV GT Coilovers $1250, now $1100
Kluch SL14 Silver Machined Wheels w/ Potenza RE970as Tires (front are 18x8.5 et +35 w/ 225/40/18 tires) (rear are 18x9.5 et +42 w/ 255/35/18 tires) $1500, now $1350

Stoptech cross drilled&slotted rotors & Stoptech performance pads (all 4) $250 pending
Cusco Engine Room Power Braces (pre-load is adjustable while installed) $300, now $250
Cusco Rear Strut Tower Bar Type OS $150 pending
Cusco Adjustable LCA $400, now $350
Whiteline Camber Bolts 16MM $25
Cusco Smart Cross Lug Nut Wrench (blue and silver) $35

Exterior:
ProTeck BRZ Skid Plates (BRZ specific, 3 piece set) $120, now $100
Nice hard plastic race ramps $60 (I don't remember the brand but I remember paying about $100

Interior:
OEM Audio Plus Reference 400CF Audio System (WRB sub w/ Cusco strut bar cut out) $1250, now $1200 including Cusco type OS bar, or $1100 alone.

Alcantra center console w/ Alcantra shift & e-brake boots (heated seat buttons have been moved up near dash and center hole filled) JDM front armrest already installed $500 and your center console and boots. (Work performed by Overland Designs)

Works by Lloyd Embroidered Floor Mats (black on black, all 4) $125, now $100

Engine Bay:
Prova Hood Damper Kit (Gunmetal) $200, now $175

Thanks for the valenti's!

[booyaka]

still looking to sell my Whiteline Com-C caster/camber plates so i can buy other stuff. According to whiteline the plates give about 1 degree of negative camber and ill throw in some SPC lower camber bolts so you can have more camber adjustability.

trying to get $100 for both plates and bolts.

[Aztec]

I have a number of OEM/Other things to sell

-Stock Header - $100 OBO (I don't plan to swap back to it any time soon)
-Tinted OEM Tails - $80 for pair
-Weathertech Floor Mats - $60 for pair
-K/N Drop in Filter - $20

Would prefer not to ship, but can at buyers expense. Live locally in the Portland Area






Here is a pic of the tinted OEM tails on the car:

[Chen]

Originally Posted by Aztec

I have a number of OEM/Other things to sell

-Stock Header - $100 OBO (I don't plan to swap back to it any time soon)
-Tinted OEM Tails - $80 for pair
-Weathertech Floor Mats - $60 for pair
-K/N Drop in Filter - $20

Would prefer not to ship, but can at buyers expense. Live locally in the Portland Area






Here is a pic of the tinted OEM tails on the car:

interested in mats and cat.

[Sammakko]

anyone looking for a passenger side muffler delete plug? from ft86speedfactory.

[Aztec]

Originally Posted by Chen

interested in mats and cat.

Mats are yours, my gf would have a fit if I sold our cat LOL

[Sammakko]

Originally Posted by Aztec

Mats are yours, my gf would have a fit if I sold our cat LOL

what about if you gave it away?

[Chen]

Originally Posted by Aztec

Mats are yours, my gf would have a fit if I sold our cat LOL

what if the cat "ran away"?