WHAT DID YOU DO TO YOUR BRZ TODAY?

[Porcupint]

Originally Posted by x1UP

You have no problems with rubbing or anything of that sort? I want to go higher in size, but i'm worried about rubbing.

I have stock suspension and 17x7 wheels (USDM STI wheels).

stock suspension will rub on his wheels and tires. I almost couldn't fit my 17x9 +40 wrapped in 245's on the stock suspension.

[DuMa]

last weekend was painting. this week the sealant was curing. so mounted the tails with complete black housing. i also VHT Niteshaded the side marker for the euro/japanese look.





how did i do?

[x1UP]

Originally Posted by DuMa

last weekend was painting. this week the sealant was curing. so mounted the tails with complete black housing. i also VHT Niteshaded the side marker for the euro/japanese look.

how did i do?

That looks AWESOME! I love it! I plan on doing this, but I can't for the life of me find the right DIY for this. If you can link me, it'd be great! I want to do this on my tails.

[B-R-Z]

That looks great. Nice alternative for those that don't want redded lenses.

[DuMa]

Originally Posted by x1UP

That looks AWESOME! I love it! I plan on doing this, but I can't for the life of me find the right DIY for this. If you can link me, it'd be great! I want to do this on my tails.

i followed this DIY

http://www.ft86club.com/forums/showthread.php?t=12489

taking out the sidemarker is pretty easy actually. there is a little glue that can be heated up with just a hair dryer and it snaps off.

[byun]

Originally Posted by G8mou

Where did you get it installed and how much ? I'm thinking about getting it done too. Thx !!

I ordered it off japanparts.com was around $250 shipped. I installed it myself took about a hour. Also ordered the beatsonic bcus3 to use.

[Poodles]

Originally Posted by byun

Installed OEM Backup Camera.

Do you have any closer pictures of the unit? Also pics of what the headunit shows (angle seems to be terrible on a lot of the aftermarket units).


How good is the night vision on it?

[byun]

Originally Posted by Poodles

Do you have any closer pictures of the unit? Also pics of what the headunit shows (angle seems to be terrible on a lot of the aftermarket units).


How good is the night vision on it?

Here you go.

The picture quality is great. Much better than most aftermarket units. I've tried them in the past on other cars and they never compared to OEM.

The grid lines are centered as well at the default setting.

Here are some more pics. Hope this helps.

[RoadKillBill]

Installed a set of Ray's 57Getters in matt gray. Square setup at 18X9.5 40 offset with 255/35 Michelin PSS. I put FEAL coil overs on so they would fit and dropped the car 30mm.

[x1UP]

Originally Posted by RoadKillBill

Installed a set of Ray's 57Getters in matt gray. Square setup at 18X9.5 40 offset with 255/35 Michelin PSS. I put FEAL coil overs on so they would fit and dropped the car 30mm.

Where did you get your wheels? Those are the same wheels I'd like to get.

[2point0]

I think it was last night, but I just realized I passed 65k...

[DGMlJDlBRZ]

Originally Posted by x1UP

Do you have the pics of the JDM BC tail lights installed on your car? If you do, please post! If not, i'll wait!

Here you go my friend...




Also just finished installing my Tomei60S, Motiv Concepts Overpipe, and the FT86SpeedFactory exhaust hole cover. Throttle response has improved and is noticeable. IMO, the power band from low to mid rpm is much smoother with this Motiv Overpipe. The quality and fitment is top notch as well.

My exhaust setup currently consists of stock header, Motiv overpipe, Invidia catless resonated front pipe, and Tomei60S. I was surprised on cold start, idle, and driving overall, it is much quieter than what I had expected. When I had just stock header, stock overpipe, Invidia front pipe, stock midpipe, and Berk dual tip muffler delete, it was very loud.

I'm very pleased with both products. Tomei, Motiv, and FT86SpeedFactory =

[tracerit]

Got my emblem stickers all the way from Ukraine. Nice to finally cover up the empty hole from the XXR cap.

[BRZtoni]

Originally Posted by DuMa

last weekend was painting. this week the sealant was curing. so mounted the tails with complete black housing. i also VHT Niteshaded the side marker for the euro/japanese look.





how did i do?

looks good!

i see you got your car at subaru pacific!
me too haha