Phoenix Swap - Page 15 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

nelsmar · 02-07-2015, 01:47 PM

This is a long shot but I'm looking for a few misc parts...
3" catback
Oil cooler (will entertain both air and water types)
Jdm under panels
Rear trunk lid with integrated lip
Vented hood or white stock hood
OEM side markers (I'm always breaking them)
Cf driveshaft
Longer final drive / rear end swap...
Exedy stage 2 clutch
Engine mounts (no thanks on Perrin / oem)

I have cash, or can trade for tuning services

nelsmar · 02-09-2015, 12:36 PM

Looks like I am selling my Radium catch can. It is the universal unit, so it doesn't come with the specific FRS/BRZ mount. No fittings included. Never used, it just sits in my cupboard. If you haven't seen one before they are pretty sexy and have a nice little anodized dipstick to check the oil level. =) I am only selling it as I am going to use a different system now and I have no longer have a use for this.

I will likely also be selling my fuel pump in the coming weeks, i think its a knock off DW65c pump... honestly not sure what brand it is I was told it was a DW65c and it wasn't but its the exact same size, comes with plug and play harness. Was holding up just fine with mid 20's PSI boost on E85 with my 540cc injectors.

Bonks86 · 02-09-2015, 02:52 PM

I have a Red Raceseng pulley set available. The water pump pulley is still brand new as well as one of the idler pulleys. I have about 15k miles on the other 3 pieces. Asking $350 OBO

I also have a set of (4) Used Eibach 25mm spacers $440 new asking $200 obo

http://www.raceseng.com/revo-pulley-...r-s-subaru-brz#

fst86frs · 02-09-2015, 03:33 PM

I have a set of Stance Rear Lower Control Arms for Sale low miles good condition $360
Also a set of fuku radiator hoses in carbon black new $120
and a new mishimoto oil cooler kit in black $480
pm me for any questions

Dallen · 02-09-2015, 03:35 PM

Quote:

Originally Posted by fst86frs

I have a set of Stance Rear Lower Control Arms for Sale low miles good condition $360
Also a set of fuku radiator hoses in carbon black new $120
and a new mishimoto oil cooler kit in black $480
pm me for any questions

Interested in any trades for the lower control arms?

I have INVIDIA n1 replica with titanium tips, agency power overpipe/frontpipe combo pipe, & borla uel headers.

Sent from my iPhone using Tapatalk

fst86frs · 02-09-2015, 04:12 PM

Quote:

Originally Posted by Dallen

Interested in any trades for the lower control arms?

I have INVIDIA n1 replica with titanium tips, agency power overpipe/frontpipe combo pipe, & borla uel headers.

Sent from my iPhone using Tapatalk

Thanks for the offer but I will pass on that, already have all of those parts taken car of lol

R3NIK · 02-09-2015, 04:29 PM

Not anytime soon, but I will be looking for an over and front pipe, uel header, and LCAs.

Celadrielas · 02-09-2015, 04:57 PM

Much like R3nik, I will be looking for a UEL but not any time soon, likely.

kdmxdgt · 02-10-2015, 12:36 AM

ive got some varrs toen black lugs for sale with a set of locks. i bought these to install with my wheels but the holes were too small to fit the socket for the lugs and the locks just plain didnt fit. they are in new/almost new condition. looking to get $60 for the set.

Lischynski · 02-13-2015, 08:54 PM

Quote:

Originally Posted by kdmxdgt

ive got some varrs toen black lugs for sale with a set of locks. i bought these to install with my wheels but the holes were too small to fit the socket for the lugs and the locks just plain didnt fit. they are in new/almost new condition. looking to get $60 for the set.

Still have these?

kdmxdgt · 02-13-2015, 10:06 PM

yea. pm or txt me if u wanna check em out or maybe i can make it to the next wednesday east side meet.

Bucs1809 · 02-17-2015, 03:02 PM

I did a muffler delete, and just have my stock muffler sitting around. Anyone looking for a stock muffler? I don't really know where to price it, so I'll say $150 OBO. Will also accept trades I can send pics if needed. Its in good condition, roughly 35k miles with it.

BobbyBlue86 · 02-17-2015, 11:42 PM

Ive got 5 OEM wheels sitting around and I figured i'd ask people local if they wanna buy a full size spare or something.

1 has a some scuffing which is the reason why I have 5, but it can be used in a pinch if you need.

The one that replaced it has a pretty new tire on it. Maybe 10k

3 of them are worn down pretty far so a new tire would be needed.

Maybe $100 for the new one and $50 for the other 3 with no dmg. The scuffed one, if you want it, maybe $35?

PM me if you are interested.

EDIT:
-The 4 good wheels are gone! I do have the scuffed up one still but it doesnt have a good tire on it, FYI

R3NIK · 02-18-2015, 12:42 AM

As any FYI, an OEM wheel won't fit in the spare spot. Trunk lid doesn't lay flat.

Sent from my iPad using Tapatalk

02-07-2015, 01:47 PM	#197
nelsmar Senior Member Join Date: Feb 2013 Drives: FR-S Location: Phoenix Posts: 2,605 Thanks: 733 Thanked 2,361 Times in 1,031 Posts Mentioned: 345 Post(s) Tagged: 3 Thread(s)	This is a long shot but I'm looking for a few misc parts... 3" catback Oil cooler (will entertain both air and water types) Jdm under panels Rear trunk lid with integrated lip Vented hood or white stock hood OEM side markers (I'm always breaking them) Cf driveshaft Longer final drive / rear end swap... Exedy stage 2 clutch Engine mounts (no thanks on Perrin / oem) I have cash, or can trade for tuning services __________________ When I grow up, I wanna be God. My flickr - *Canibeat* Local magazine scout Old Setup: Vortech Supercharged 360WHP/262WTQ @ 11.5psi My build thread - WTF happened to nelsmar's car thread

02-09-2015, 12:36 PM	#198
nelsmar Senior Member Join Date: Feb 2013 Drives: FR-S Location: Phoenix Posts: 2,605 Thanks: 733 Thanked 2,361 Times in 1,031 Posts Mentioned: 345 Post(s) Tagged: 3 Thread(s)	Looks like I am selling my Radium catch can. It is the universal unit, so it doesn't come with the specific FRS/BRZ mount. No fittings included. Never used, it just sits in my cupboard. If you haven't seen one before they are pretty sexy and have a nice little anodized dipstick to check the oil level. =) I am only selling it as I am going to use a different system now and I have no longer have a use for this. I will likely also be selling my fuel pump in the coming weeks, i think its a knock off DW65c pump... honestly not sure what brand it is I was told it was a DW65c and it wasn't but its the exact same size, comes with plug and play harness. Was holding up just fine with mid 20's PSI boost on E85 with my 540cc injectors. __________________ When I grow up, I wanna be God. My flickr - *Canibeat* Local magazine scout Old Setup: Vortech Supercharged 360WHP/262WTQ @ 11.5psi My build thread - WTF happened to nelsmar's car thread

02-09-2015, 04:57 PM	#204
Celadrielas Senior Member Join Date: Mar 2014 Drives: 2013 Asphalt Fr-S Location: Earth Posts: 850 Thanks: 535 Thanked 379 Times in 248 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	Much like R3nik, I will be looking for a UEL but not any time soon, likely. __________________ "That's the beatiful thing about life! No matter how filthy something gets, you can always clean it right up."

02-17-2015, 11:42 PM	#209
BobbyBlue86 Senior Member Join Date: Nov 2013 Drives: Subaru BRZ Location: Apache Junction, AZ Posts: 214 Thanks: 17 Thanked 63 Times in 44 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Ive got 5 OEM wheels sitting around and I figured i'd ask people local if they wanna buy a full size spare or something. 1 has a some scuffing which is the reason why I have 5, but it can be used in a pinch if you need. The one that replaced it has a pretty new tire on it. Maybe 10k 3 of them are worn down pretty far so a new tire would be needed. Maybe $100 for the new one and $50 for the other 3 with no dmg. The scuffed one, if you want it, maybe $35? PM me if you are interested. EDIT: -The 4 good wheels are gone! I do have the scuffed up one still but it doesnt have a good tire on it, FYI Last edited by BobbyBlue86; 02-28-2015 at 01:40 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pentosin Trans Fluid Swap \| Motul 300 Diff Swap \| Impressions	Dezoris	Mechanical Maintenance (Oil, Fluids, Break-In, Servicing)	15	06-06-2017 11:54 PM
Phoenix run Tue 8/26 pics	RiptorVT	Southwest	1	08-30-2014 03:45 PM
Anyone in the Phoenix area	evo4g63	Southwest	0	02-06-2013 12:19 PM
Looking to move to Phoenix from WI	FR-Shadow	Southwest	37	01-24-2013 12:38 AM

02-09-2015, 02:52 PM	#199
Bonks86 Senior Member Join Date: Feb 2013 Drives: Gt-86 Location: AZ Posts: 222 Thanks: 48 Thanked 72 Times in 53 Posts Mentioned: 10 Post(s) Tagged: 1 Thread(s)	I have a Red Raceseng pulley set available. The water pump pulley is still brand new as well as one of the idler pulleys. I have about 15k miles on the other 3 pieces. Asking $350 OBO I also have a set of (4) Used Eibach 25mm spacers $440 new asking $200 obo http://www.raceseng.com/revo-pulley-...r-s-subaru-brz#

02-09-2015, 03:33 PM	#200
fst86frs Member Join Date: Aug 2013 Drives: FAT H8R Hot Lava FRS Location: Phoenix Posts: 60 Thanks: 25 Thanked 62 Times in 25 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	I have a set of Stance Rear Lower Control Arms for Sale low miles good condition $360 Also a set of fuku radiator hoses in carbon black new $120 and a new mishimoto oil cooler kit in black $480 pm me for any questions

User Name		Remember Me?
Password