FT-86 SpeedFactory LCA by Verus - Lightest LCA for the Twins - Development Thread - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Calum · 02-16-2015, 12:10 PM

Eric, I'm glad to see you still producing for the twins. I hadn't seen much from you recently which had me worried the boards negativity had gotten to you.

I'll admit though that I didn't expect to see you in such a saturated market. I'm curious to see what you come up with and how it's going to be different from the masses.

And in keeping with the negativity from before, I think you missed a zero. I can hit tolerances of less than 5 thou with a file and a well mounted vice.

themajesticone · 02-16-2015, 01:21 PM

Perhaps too hasty of a question but....any idea on an estimate price? More than the SPC lca but less than the SPL lca.....maaaaybe?

Koa · 02-16-2015, 02:28 PM

Quote:

Originally Posted by themajesticone

Perhaps too hasty of a question but....any idea on an estimate price? More than the SPC lca but less than the SPL lca.....maaaaybe?

bro they said earlier that it was too early to tell.. but pricing will be competitive

dem00n · 02-16-2015, 04:03 PM

Why not go the SPL route and do the multiple mounting points for the shock and sway bar? Maybe something different than any current ones out there don't have? I know that sounds stupid, but you're limited.

There's already so many LCA's out there. In fact i contacted one suspension builder i know who is making parts for our twins and he flat out said there's no point in making a LCA because the market for it is already so competitive.

eric6 · 02-16-2015, 05:00 PM

Quote:

Originally Posted by Calum

Eric, I'm glad to see you still producing for the twins. I hadn't seen much from you recently which had me worried the boards negativity had gotten to you.

I'll admit though that I didn't expect to see you in such a saturated market. I'm curious to see what you come up with and how it's going to be different from the masses.

And in keeping with the negativity from before, I think you missed a zero. I can hit tolerances of less than 5 thou with a file and a well mounted vice.

What isn't saturated with these cars anymore? FT86-Speedfactory asked us to come up with something, and we came up with these. The major difference is the weight. We are well under 3lbs per side fully loaded.

Quote:

Originally Posted by themajesticone

Perhaps too hasty of a question but....any idea on an estimate price? More than the SPC lca but less than the SPL lca.....maaaaybe?

Definitely more then SPC, unsure about SPL. These aren't going to be the cheapest, I just said competitive. Their has been a significant amount of work that went into these, as well as using a superior alloy of aluminum then anything else out.

Quote:

Originally Posted by dem00n

Why not go the SPL route and do the multiple mounting points for the shock and sway bar? Maybe something different than any current ones out there don't have? I know that sounds stupid, but you're limited.

There's already so many LCA's out there. In fact i contacted one suspension builder i know who is making parts for our twins and he flat out said there's no point in making a LCA because the market for it is already so competitive.

I'm a little curious as to why that adjustment is necessary?

See above as to why we came out with something.

dem00n · 02-16-2015, 05:35 PM

Quote:

Originally Posted by eric6

What isn't saturated with these cars anymore? FT86-Speedfactory asked us to come up with something, and we came up with these. The major difference is the weight. We are well under 3lbs per side fully loaded.

Definitely more then SPC, unsure about SPL. These aren't going to be the cheapest, I just said competitive. Their has been a significant amount of work that went into these, as well as using a superior alloy of aluminum then anything else out.

I'm a little curious as to why that adjustment is necessary?

See above as to why we came out with something.

Different shock mounting point for more travel and the other mounting point for adjustable stiffness.

It seems that the people using the SPL LCA's compete in a lot of motorsports so that extra fine tuning means a lot to them.

continuecrushing · 02-16-2015, 05:53 PM

sweet! Love seeing new options + development of it

can't wait for price

s2d4 · 02-16-2015, 05:58 PM

Guess self leveling sensor allowance would be a good differentiation.

Calum · 02-16-2015, 06:51 PM

Quote:

Originally Posted by eric6

What isn't saturated with these cars anymore? FT86-Speedfactory asked us to come up with something, and we came up with these. The major difference is the weight. We are well under 3lbs per side fully loaded.

Definitely more then SPC, unsure about SPL. These aren't going to be the cheapest, I just said competitive. Their has been a significant amount of work that went into these, as well as using a superior alloy of aluminum then anything else out.

I'm a little curious as to why that adjustment is necessary?

See above as to why we came out with something.

Good to hear!

themajesticone · 02-16-2015, 08:14 PM

Quote:

Originally Posted by Koa

bro they said earlier that it was too early to tell.. but pricing will be competitive

Hey I waited a day!

eric6 · 02-17-2015, 12:23 AM

Quote:

Originally Posted by Shutter

sweet! Love seeing new options + development of it

can't wait for price

Thanks!

Quote:

Originally Posted by s2d4

Guess self leveling sensor allowance would be a good differentiation.

We will look into it. We don't have that in the states, making it difficult to see what is needed.

Quote:

Originally Posted by Calum

Good to hear!

. We like this car and community quite a bit. Their is always negative people. Especially when you're new and don't do everything by the book.

Turdinator · 02-17-2015, 01:52 AM

@eric6 any thoughts on doing a light weight upper control arm? From the reports I have seen they are rather heavy.

Calum · 02-17-2015, 04:27 AM

Quote:

Originally Posted by eric6

What isn't saturated with these cars anymore?

CNC ported heads with a naturally aspirated goal.

A means if adjusting camber via an offset bolt/bushing on the rear LCA.

And adjustable stock size or only slightly larger sway bar set.

That's all I can think of.

JDLAutoDesign · 02-17-2015, 02:44 PM

Arms look great! I have function7's on my car now and curious to see if these end up lighter.

02-16-2015, 01:21 PM	#16
themajesticone Senior Member Join Date: Jun 2014 Drives: '13 UM86 Location: Bay Area, California Posts: 406 Thanks: 338 Thanked 176 Times in 112 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Perhaps too hasty of a question but....any idea on an estimate price? More than the SPC lca but less than the SPL lca.....maaaaybe? __________________ JRSC C30 91 oct \| JDL UEL Header \| Tomei Overpipe \| Milltek Front Pipe \| Milltek Catback \| SPL LCA v2 \| FA 500 v5 Coilovers 6k/7k \| SPC Front Camber Bolts \| Enkei RPF1 17x9 +35 \| 245/40 Michelin Pilot Super Sport

02-16-2015, 04:03 PM	#18
dem00n Member of the year - 2016 Join Date: Jul 2012 Drives: Scion FRS Location: New York Posts: 3,575 Thanks: 788 Thanked 2,427 Times in 1,111 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	Why not go the SPL route and do the multiple mounting points for the shock and sway bar? Maybe something different than any current ones out there don't have? I know that sounds stupid, but you're limited. There's already so many LCA's out there. In fact i contacted one suspension builder i know who is making parts for our twins and he flat out said there's no point in making a LCA because the market for it is already so competitive. __________________ Friends don't let friends Plastidip

02-16-2015, 05:58 PM	#22
s2d4 Senior Member Join Date: Mar 2013 Drives: R32 GTR, AW11 MR2 SC, GTS86 R Location: OZ Posts: 2,615 Thanks: 603 Thanked 1,224 Times in 708 Posts Mentioned: 35 Post(s) Tagged: 0 Thread(s)	Guess self leveling sensor allowance would be a good differentiation. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Verus Engineering Rear Wing Development	VerusEric	Tracking / Autocross / HPDE / Drifting	203	07-05-2021 10:15 AM
Verus' Shop BRZ - Development Thread	VerusEric	Member's Car Journals	266	12-19-2019 05:12 PM
FT-86 SpeedFactory Diffuser by Verus - Complete Aero Solution	FT-86 SpeedFactory	Cosmetic Modification (Interior/Exterior/Lighting)	574	09-15-2019 11:10 AM
FT-86 SpeedFactory Turbo Kit - Development and Testing	FT-86 SpeedFactory	Forced Induction	271	09-20-2017 12:07 AM
Front Wheel Deflectors - FT-86 SpeedFactory by Verus Engineering	VerusEric	Cosmetic Modification (Interior/Exterior/Lighting)	25	09-22-2016 02:41 AM

02-16-2015, 12:10 PM	#15
Calum That Guy Join Date: Dec 2011 Drives: 2013 asphalt FRS MT Location: Halifax, Nova Scotia Posts: 4,865 Thanks: 5,058 Thanked 2,868 Times in 1,499 Posts Mentioned: 82 Post(s) Tagged: 1 Thread(s)	Eric, I'm glad to see you still producing for the twins. I hadn't seen much from you recently which had me worried the boards negativity had gotten to you. I'll admit though that I didn't expect to see you in such a saturated market. I'm curious to see what you come up with and how it's going to be different from the masses. And in keeping with the negativity from before, I think you missed a zero. I can hit tolerances of less than 5 thou with a file and a well mounted vice.

02-16-2015, 05:53 PM	#21
continuecrushing Join Date: Mar 2013 Drives: 2013 Firestorm FRS Location: Lake Elsinore, CA Posts: 2,707 Thanks: 1,231 Thanked 2,144 Times in 1,003 Posts Mentioned: 73 Post(s) Tagged: 2 Thread(s)	sweet! Love seeing new options + development of it can't wait for price

02-17-2015, 02:44 PM	#28
JDLAutoDesign Join Date: Jul 2012 Drives: 13 FRS Location: Phx AZ Posts: 1,827 Thanks: 389 Thanked 1,437 Times in 652 Posts Mentioned: 104 Post(s) Tagged: 1 Thread(s)	Arms look great! I have function7's on my car now and curious to see if these end up lighter.

User Name		Remember Me?
Password