Would this car cover fit and works with the BRZ?

[Jfheisenberg]

I just got the BRZ two days ago, and im not going to be driving it until the winter is over in north jersey. I will be leaving the car in my drive way and im looking for a car cover to protect from snow and stuff like that. The OEM car cover is expensive as hell. So i saw this car cover with good reviews for about $50 and looks like it would fit the BRZ

Just wondering what you guys think or if any one of you have try it.

[ame="http://www.amazon.com/ADCO-31004-Adco-Car-Cover/dp/B008FXNDQ2/ref=lh_ni_t?ie=UTF8&psc=1&smid=ATVPDKIKX0DER"]http://www.amazon.com/ADCO-31004-Adco-Car-Cover/dp/B008FXNDQ2/ref=lh_ni_t?ie=UTF8&psc=1&smid=ATVPDKIKX0DER[/ame]

Thanks

[WhiteFRS69]

im going to assume yes, the FRS/BRZ has a wheelbase of 101 inches, which is about 8.5ft, with the front and rear bumper say 10-11 ft

that car cover is good for a car that is 13.4ft

yes it will fit

im rocking a car cover meant for a BMW 328I and it works no problem
as long as it covers the entire car you are good

[Jfheisenberg]

Originally Posted by WhiteFRS69

im going to assume yes, the FRS/BRZ has a wheelbase of 101 inches, which is about 8.5ft, with the front and rear bumper say 10-11 ft

that car cover is good for a car that is 13.4ft

yes it will fit

im rocking a car cover meant for a BMW 328I and it works no problem
as long as it covers the entire car you are good

Oh that's cool that it will fit the brz. I just read online that some cover might scratch the paint of the car and stuff like that, so i just want to be sure that it wont be the case with a cover like this.

[N1rve]

Originally Posted by Jfheisenberg

Oh that's cool that it will fit the brz. I just read online that some cover might scratch the paint of the car and stuff like that, so i just want to be sure that it wont be the case with a cover like this.

Scratches usually occur because the car is dusty and the cover just moves the dust around when you take it off/put it on.