Official OpenFlash Tablet FA20 Tuning Tech Discussion Thread - Page 161 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Phantobe · 01-22-2015, 04:21 AM

Quote:

Originally Posted by steve99

try connecting oft to pc running latest version of openflash manager 1.15.1 i think and let it update also update template file from the oft downloads site

I just connected to ofm today and still no dice, I'll try updating the template file tomorrow!

steve99 · 01-22-2015, 04:42 AM

Quote:

Originally Posted by Phantobe

I just connected to ofm today and still no dice, I'll try updating the template file tomorrow!

template should fix it if you have just updated oft.

mid_life_crisis · 01-22-2015, 07:10 PM

It has been mentioned a couple of times by different people (Shiv one of them) that implementing soft rev limit can mess up the shifting on an A/T. This makes no sense to me and I've been in denial. Just for satisfaction, fully expecting to see no difference, I flashed one of Shiv's roms without altering it.
They're right. The shifts are noticeably better. I don't get it, I can't figure it out, but it's true. No more soft rev auto for me.

steve99 · 01-22-2015, 08:01 PM

Quote:

Originally Posted by mid_life_crisis

It has been mentioned a couple of times by different people (Shiv one of them) that implementing soft rev limit can mess up the shifting on an A/T. This makes no sense to me and I've been in denial. Just for satisfaction, fully expecting to see no difference, I flashed one of Shiv's roms without altering it.
They're right. The shifts are noticeably better. I don't get it, I can't figure it out, but it's true. No more soft rev auto for me.

it possible the auto tans control unit has the stock rpm limit programeed into it so it gets a bit confused when engine ecu rpm limit is changed.

you could try implementing the soft rpm limit timing reduction but keeping the stock rpm limit .

Phantobe · 01-22-2015, 11:11 PM

Quote:

Originally Posted by steve99

template should fix it if you have just updated oft.

Updated the template via OFM, I think the most recent update was from October on the open flash website. Did it via the Upgrade tab, and once the template was done loading OFM said Update Complete or something like that. Anyways it didnt' work :/

Any suggestions @steve99

^ How it looked before I updated the template (save and record button not functional)

^ After updating the template

^ Next screen after that above error (save and record still not functional)

steve99 · 01-22-2015, 11:16 PM

@Phantobe suggest you call oft guys i think they have ommitted to upddate the template file on the downloads site and logging wont work after the update.

Shiv@Openflash · 01-22-2015, 11:52 PM

Quote:

Originally Posted by steve99

@Phantobe suggest you call oft guys i think they have ommitted to upddate the template file on the downloads site and logging wont work after the update.

The new Template File was posted up on the website an hour ago. When you upload it, you will see some new graphics/icons as well as a new selection (Configure Tuning Alerts) in the Diagnostic Selections. I'll be making a video later this week showing how to use this new feature (it's a very powerful feature!).

If you don't upload the new Template File, you will still be able to do everything that you were able to do before. You will just get a message saying to "Please update Template File". You will still be able to flash the ECU, view data, datalog, etc,. You just won't get access to the new Tuning Alert function (to be explained soon!).

Cheers,
shiv

steve99 · 01-22-2015, 11:59 PM

Quote:

Originally Posted by Shiv@Openflash

The new Template File was posted up on the website an hour ago. When you upload it, you will see some new graphics/icons as well as a new selection (Configure Tuning Alerts) in the Diagnostic Selections. I'll be making a video later this week showing how to use this new feature (it's a very powerful feature!).

If you don't upload the new Template File, you will still be able to do everything that you were able to do before. You will just get a message saying to "Please update Template File". You will still be able to flash the ECU, view data, datalog, etc,. You just won't get access to the new Tuning Alert function (to be explained soon!).

Cheers,
shiv

thanks shiv.

a couple of guys that got the auto update have said the realtime logging worked to screen but the logging to file did not, hopefully the new template will correct that as well

Shiv@Openflash · 01-23-2015, 12:02 AM

Quote:

Originally Posted by steve99

thanks shiv.

a couple of guys that got the auto update have said the realtime logging worked to screen but the logging to file did not, hopefully the new template will correct that as well

In my testing, both logging and saving to csv file should work just fine with the older Template File 4. The only thing that was missing is the icon button for Resetting the tuning alerts. Everything else is there and functional.

Phantobe · 01-23-2015, 02:56 AM

Quote:

Originally Posted by Shiv@Openflash

In my testing, both logging and saving to csv file should work just fine with the older Template File 4. The only thing that was missing is the icon button for Resetting the tuning alerts. Everything else is there and functional.

Any suggestions for getting my data logging to work?

I can't save/record any of my data to my OFT the record/save button aren't functioning. The only thing I could think of that may be it, is maybe I should calibrate with a stylus but...I mean I can hit every other button ok.

Shiv@Openflash · 01-23-2015, 04:08 AM

Quote:

Originally Posted by Phantobe

Any suggestions for getting my data logging to work?

I can't save/record any of my data to my OFT the record/save button aren't functioning. The only thing I could think of that may be it, is maybe I should calibrate with a stylus but...I mean I can hit every other button ok.

Definitely try calibrating the screen with a stylus

Phantobe · 01-23-2015, 09:36 PM

Quote:

Originally Posted by Shiv@Openflash

Definitely try calibrating the screen with a stylus

Yup that fixed it for me!

Thanks @Shiv@Openflash & @steve99

menikmati · 01-24-2015, 01:33 AM

Is FFS/LC for D00C's (2015 6MT USDM) in the works?

cfordart · 01-24-2015, 05:20 PM

Have had my OFT for almost a year now. The US6MT stage2 UEL tune has worked well. Finally decided to update to the newer v2.063 stage2 UEL 93 octane tune.

Here's my problem...last year I loaded my first stg2 tune from the OFT as it was out of the box. Those tunes were "B01C" tunes. Now that I've updated the tablet with the latest OFManager (1.15.1) the CAL says ZA1JB00C so I uploaded the Stage 2 UEL B00C tune. After plugging into the car it gives me an error when trying to write to the ECU and says try again. When I cancel out of that and do an "info" the tablet says my ECU is a B01C.

Seems it wants a B01C tune, but the tablet won't let me upload a B01C tune, only the B00C tune. What am I doing wrong? Thanks for any help!

01-22-2015, 07:10 PM	#2243
mid_life_crisis Senior Member Join Date: May 2013 Drives: FR-S 10 #103 AT Location: NC Posts: 1,519 Thanks: 101 Thanked 599 Times in 347 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	It has been mentioned a couple of times by different people (Shiv one of them) that implementing soft rev limit can mess up the shifting on an A/T. This makes no sense to me and I've been in denial. Just for satisfaction, fully expecting to see no difference, I flashed one of Shiv's roms without altering it. They're right. The shifts are noticeably better. I don't get it, I can't figure it out, but it's true. No more soft rev auto for me. __________________ Necessity may be the mother of Invention but Desperation is quite often the father. “Sex is like Bridge. If you don't have a good partner, you'd better have a good hand.” - Mae West Papa said, "son there's a lot of evil temptations out there. Best to try 'em all so you know which ones to avoid."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFlash Tablet	Rombinhood@OpenFlash	Software Tuning	1838	07-29-2023 07:35 PM
OpenFlash Tablet Stg 2 Tune (Dyno Progress)	Rombinhood@OpenFlash	Software Tuning	26	10-24-2013 02:19 PM
FBM Tuning fixed my issue, FA20 and Visconti didn't work as well	whitefrs	Forced Induction	253	08-19-2013 01:39 PM
Official MMA Thread	zigzagz94	Off-Topic Lounge [WARNING: NO POLITICS]	11	12-15-2009 11:59 PM

01-22-2015, 11:16 PM	#2246
steve99 Banned Join Date: Dec 2013 Drives: FT86 Location: Australia Posts: 7,996 Thanks: 1,035 Thanked 4,994 Times in 2,984 Posts Mentioned: 598 Post(s) Tagged: 2 Thread(s)	@Phantobe suggest you call oft guys i think they have ommitted to upddate the template file on the downloads site and logging wont work after the update.

01-24-2015, 01:33 AM	#2253
menikmati Senior Member Join Date: Nov 2013 Drives: 2015 BRZ, 2005 STI Location: San Diego, CA Posts: 336 Thanks: 229 Thanked 225 Times in 118 Posts Mentioned: 3 Post(s) Tagged: 2 Thread(s)	Is FFS/LC for D00C's (2015 6MT USDM) in the works?

01-24-2015, 05:20 PM	#2254
cfordart Senior Member Join Date: Feb 2013 Drives: 2014 FR-S Location: Memphis Posts: 183 Thanks: 16 Thanked 91 Times in 49 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Have had my OFT for almost a year now. The US6MT stage2 UEL tune has worked well. Finally decided to update to the newer v2.063 stage2 UEL 93 octane tune. Here's my problem...last year I loaded my first stg2 tune from the OFT as it was out of the box. Those tunes were "B01C" tunes. Now that I've updated the tablet with the latest OFManager (1.15.1) the CAL says ZA1JB00C so I uploaded the Stage 2 UEL B00C tune. After plugging into the car it gives me an error when trying to write to the ECU and says try again. When I cancel out of that and do an "info" the tablet says my ECU is a B01C. Seems it wants a B01C tune, but the tablet won't let me upload a B01C tune, only the B00C tune. What am I doing wrong? Thanks for any help!

User Name		Remember Me?
Password