DIY: Winjet Retrofit D2S + Constant On DRL + JDM-esque paint - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Mad1723 · 07-22-2014, 11:40 AM

Quote:

Originally Posted by trevorovert

I actually hadn't thought of this. I will definitely take a pic next time I'm in my car at night.

The light cutoff is laser-beam like , but you will get a very slight amount of leak from the DRL's. When I say slight amount, I really do mean a slight amount.. they aren't really well defined, so it's not like you can watch them as you drive around. it looks like a very soft flashlight. It has never really bugged me

Thanks! If you manage to snag a picture, post it here. Would love to see the end result

weederr33 · 12-16-2014, 01:21 PM

I recently got this retrofit kit for my Winjets, and was curious if I needed the add a circuit if I wanted the DRLs to work like they normally do? I.e. not always on I guess you'd say?

86-tundra · 12-18-2014, 12:26 PM

Quote:

Originally Posted by weederr33

I recently got this retrofit kit for my Winjets, and was curious if I needed the add a circuit if I wanted the DRLs to work like they normally do? I.e. not always on I guess you'd say?

I am sure you can probably just tap into the DRL wire, but I don't have any instructions on how to do that. I know there is a DRL module under one of the head lamps, I would just T tap into the red wire.

BAMF86 · 09-22-2015, 04:13 PM

Just an FYI for anyone doing the constant DRL mod, the add a ciruit that OP linked is the wrong one. You need the one for newer cars which uses a much smaller fuse.

I had to run to the auto store to pick up a new one cause the one from amazon didn't fit

Binary_fission · 06-17-2016, 04:44 AM

Has anyone upgraded bar LED bulbs or made them switchbacks?
any input appreciated, or at least whats the bulb size on leds. thanks!

6spd · 08-01-2016, 10:35 PM

Quote:

Originally Posted by Binary_fission

Has anyone upgraded bar LED bulbs or made them switchbacks?
any input appreciated, or at least whats the bulb size on leds. thanks!

Found this on other thread:
http://www.ft86club.com/forums/showp...&postcount=218

Winjet LED bar use 6 5050 LED each side. it should be easy to swap them out with switchback LED and add extra wire route for the amber turn signal.

Binary_fission · 08-01-2016, 10:38 PM

Quote:

Originally Posted by 6spd

Found this on other thread:
http://www.ft86club.com/forums/showp...&postcount=218

Winjet LED bar use 6 5050 LED each side. it should be easy to swap them out with switchback LED and add extra wire route for the amber turn signal.

Thank you sir

Sent from my SM-N910T using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Retrofit Winjet headlights	post_break	DIY (Do-It-Yourself) Guides	6	07-15-2014 12:13 AM
WTT: Winjet Black Headlight for Winjet chrome	dezmoondo	Exterior Parts (Aero, Lighting, Etc.)	0	04-13-2014 03:02 AM
Install Morimoto Retrofit kit into Winjet lights?	Khyron686	Cosmetic Modification (Interior/Exterior/Lighting)	2	03-17-2014 05:55 PM
Custom Purple Winjet and Black Winjet Headlights	xclusive_brett	Cosmetic Modification (Interior/Exterior/Lighting)	35	12-17-2013 08:28 AM

12-16-2014, 01:21 PM	#44
weederr33 Airborne at your service Join Date: Sep 2014 Drives: '17 BRZ Series.Yellow Location: El Paso, Texas Posts: 6,419 Thanks: 4,579 Thanked 5,706 Times in 2,992 Posts Mentioned: 33 Post(s)	I recently got this retrofit kit for my Winjets, and was curious if I needed the add a circuit if I wanted the DRLs to work like they normally do? I.e. not always on I guess you'd say?

09-22-2015, 04:13 PM	#46
BAMF86 much slow Join Date: Oct 2013 Drives: 13 Raven FRS, 05 Rio Yellow S2000 Location: Milpitas, CA Posts: 132 Thanks: 94 Thanked 90 Times in 49 Posts Mentioned: 2 Post(s)	Just an FYI for anyone doing the constant DRL mod, the add a ciruit that OP linked is the wrong one. You need the one for newer cars which uses a much smaller fuse. I had to run to the auto store to pick up a new one cause the one from amazon didn't fit

User Name		Remember Me?
Password