Victory Function Front Wide Fender Replacement - Page 5 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Crom · 11-07-2014, 06:21 PM

Second proto in paint now - working out final tweaks.

Khorne · 11-16-2014, 11:32 AM

Quote:

Originally Posted by Crom

Second proto in paint now - working out final tweaks.

The spot for the fender garnish looks a bit off? Will this accommodate the OEM fender garnish?

Wonderbar · 11-16-2014, 05:18 PM

Nice! I'll trade you a rear diffuser and side splitters for a set of these.

Crom · 11-17-2014, 02:04 AM

Second car completed ! We are all very excited for these. Special thanks to MotoIQ and VF Team for their support ... Write up soon to follow. This cars front camber is pretty extreme at -3.0 plus... Tires are 265/35/18 Achilles 123S.

8R6 · 11-17-2014, 06:58 PM

nice. the fenders look A LOT better (imo) with the "normal" 86 side garnishes, instead of the RS1.0 ones.

Crom · 11-17-2014, 08:18 PM

This design yields a low drag air escape in conjunction with a engine air pass though to help alleviate temps. Also to note, when developing for this platform, we noticed that running a wider tire meant clearance issues at the OE bumper/fender mounting point, where the corner parking light is located. This design accounts for that as this is the first full fender replacement for the FRS/BRZ with a +20mm width increase for the full sweep ( front corner to over tire ).... for wheel clearance not just at the apex at the top of the arch. This means no exaggerated camber solutions to utilize the full width increase as with other manufacturers.

DAEMANO · 11-17-2014, 08:26 PM

Crom · 11-20-2014, 05:06 PM

A few more including full lock and door clearance..

Wonderbar · 11-24-2014, 01:52 PM

ETA and price range?

Smoke Destructer · 11-24-2014, 08:06 PM

Could you get some shots of the car looking straight down the side? Just so that we can see how much the front fender sticks out compared to the rear bodywork. Just by eyeballing it they look like they'd be pretty square, but it's tough to say for sure.

calmtigers · 11-24-2014, 09:16 PM

looks like you might need some new tires..

Crom · 11-25-2014, 04:32 PM

More pictures/ data can be found on the Facebook page
VictoryFunction USA.

Thanks !

Crom · 12-13-2014, 02:32 AM

Thanks LXII photography...

willnigguhwassuh · 12-15-2014, 02:28 AM

waiting for mine to be shipped!

11-17-2014, 06:58 PM	#61
8R6 Senior Member Join Date: Jan 2014 Drives: FRS Location: SoCal Posts: 2,086 Thanks: 2,738 Thanked 1,339 Times in 746 Posts Mentioned: 30 Post(s) Tagged: 2 Thread(s)	nice. the fenders look A LOT better (imo) with the "normal" 86 side garnishes, instead of the RS1.0 ones. __________________ Team BRG inspire-usa My car build #8R6

11-24-2014, 09:16 PM	#67
calmtigers Senior Member Join Date: Oct 2013 Drives: 2014 Whiteout TRD FR-S 6MT Location: Fresno / DTLA Posts: 928 Thanks: 628 Thanked 376 Times in 214 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	looks like you might need some new tires.. __________________ "I love dinosaurs so much that I’ve based my life on burning as much black melted dinosaur flesh as I can on a daily basis...even the screaming sound of prehistoric reptilians being burnt through any of the classic Japanese four cylinders gives me great joy."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Raven front bumper plus front underpanel and passenger side front fender liner	THEmailman	Want-To-Buy Requests	1	04-20-2014 01:05 AM
18x10 +40 wide wheel up front?	raytrix	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	11	02-24-2014 08:45 PM
Replacement Fender Clips	Deathalo	Cosmetic Modification (Interior/Exterior/Lighting)	1	02-04-2014 02:09 PM
WTB: BRZ PS headlight, hood, front wide fenders, front bumper/ body kit	Guildjs	Want-To-Buy Requests	5	10-31-2013 09:35 PM
my almost victory lap.	karma003	Tracking / Autocross / HPDE / Drifting	5	11-12-2012 08:47 AM

11-07-2014, 06:21 PM	#57
Crom Member Join Date: Mar 2014 Drives: 350Z, EVO X Location: Huntington Beach, California, United States Posts: 31 Thanks: 0 Thanked 39 Times in 16 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Second proto in paint now - working out final tweaks.

11-17-2014, 02:04 AM	#60
Crom Member Join Date: Mar 2014 Drives: 350Z, EVO X Location: Huntington Beach, California, United States Posts: 31 Thanks: 0 Thanked 39 Times in 16 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Second car completed ! We are all very excited for these. Special thanks to MotoIQ and VF Team for their support ... Write up soon to follow. This cars front camber is pretty extreme at -3.0 plus... Tires are 265/35/18 Achilles 123S.

11-17-2014, 08:18 PM	#62
Crom Member Join Date: Mar 2014 Drives: 350Z, EVO X Location: Huntington Beach, California, United States Posts: 31 Thanks: 0 Thanked 39 Times in 16 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	This design yields a low drag air escape in conjunction with a engine air pass though to help alleviate temps. Also to note, when developing for this platform, we noticed that running a wider tire meant clearance issues at the OE bumper/fender mounting point, where the corner parking light is located. This design accounts for that as this is the first full fender replacement for the FRS/BRZ with a +20mm width increase for the full sweep ( front corner to over tire ).... for wheel clearance not just at the apex at the top of the arch. This means no exaggerated camber solutions to utilize the full width increase as with other manufacturers.

11-20-2014, 05:06 PM	#64
Crom Member Join Date: Mar 2014 Drives: 350Z, EVO X Location: Huntington Beach, California, United States Posts: 31 Thanks: 0 Thanked 39 Times in 16 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	A few more including full lock and door clearance..

11-24-2014, 08:06 PM	#66
Smoke Destructer Senior Member Join Date: Jun 2013 Drives: 2013 Whiteout FRS Location: North Carolina Posts: 106 Thanks: 26 Thanked 33 Times in 26 Posts Mentioned: 1 Post(s) Tagged: 2 Thread(s)	Could you get some shots of the car looking straight down the side? Just so that we can see how much the front fender sticks out compared to the rear bodywork. Just by eyeballing it they look like they'd be pretty square, but it's tough to say for sure.

11-25-2014, 04:32 PM	#68
Crom Member Join Date: Mar 2014 Drives: 350Z, EVO X Location: Huntington Beach, California, United States Posts: 31 Thanks: 0 Thanked 39 Times in 16 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	More pictures/ data can be found on the Facebook page VictoryFunction USA. Thanks !

12-13-2014, 02:32 AM	#69
Crom Member Join Date: Mar 2014 Drives: 350Z, EVO X Location: Huntington Beach, California, United States Posts: 31 Thanks: 0 Thanked 39 Times in 16 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Thanks LXII photography...

12-15-2014, 02:28 AM	#70
willnigguhwassuh IG: will__is__nguyen Join Date: Nov 2014 Drives: 2013 Asphalt FRS Location: Rockville, MD Posts: 93 Thanks: 16 Thanked 48 Times in 32 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	waiting for mine to be shipped!

User Name		Remember Me?
Password