Someone backed into my baby...

[I_Shinji]

This was on top of LAC+USC medical center. The guy who hit my car is a doctor there.

[Turbo95eg6]

Good god. Call me crazy, but they may be able to pull that out.

[spitfire481]

new door shell, blend quarter, blend fender

[Tcoat]

Originally Posted by spitfire481

new door shell, blend quarter, blend fender

Nah. I am with the PDR crowd on this one. As long as there is no paint damage we just can't see in the pic a good PDR guy will have that done in a jiffy.

[spitfire481]

Originally Posted by Tcoat

Nah. I am with the PDR crowd on this one. As long as there is no paint damage we just can't see in the pic a good PDR guy will have that done in a jiffy.

i hope you are kidding? if you knew how easy the metal on these door stretches, and the fact that its creased at the intrusion bar that runs from top front to bottom rear of the door you would know that there is no way that is coming out. ive actually repaired, and replaced a few doors on these cars. also creased at the upper horizontal bar thats just above the handle from front to back

[Tcoat]

Originally Posted by spitfire481

i hope you are kidding? if you knew how easy the metal on these door stretches, and the fact that its creased at the intrusion bar that runs from top front to bottom rear of the door you would know that there is no way that is coming out. ive actually repaired, and replaced a few doors on these cars. also creased at the upper horizontal bar thats just about the handle from front to back

Never fixed one and never will so I will have to take your word for it.
Have seen far worse that that fixed by PDR on here though. Doubt there is too much stretch as the paint looks ok (in the pic at any rate) Mind you I don't think any of the others went across the bar like that.

[spitfire481]

Originally Posted by Tcoat

Never fixed one and never will so I will have to take your word for it.
Have seen far worse that that fixed by PDR on here though. Doubt there is too much stretch as the paint looks ok (in the pic at any rate) Mind you I don't think any of the others went across the bar like that.

yeah, once the metal gets creased around the bar or inner structure its glued to it starts to stretch out in the center of the dent. if it was popped out, id say that there will be a crease left diagonally from top left to bottom right that wont come out, and horizontally right above the handle.

insurance will write
door shell
paint door shell + underside
r+i fender garnish, blend fender
r+i quarter glass, blend quarter

i just kind of quick wrote it in my estimating software since im sitting at my computer in the office. i wrote $1500

[oldpueblo]

Originally Posted by I_Shinji

It's a 10 series limited. Hope they can match that color.

I just had my 10 series fixed and my sister in law just had hers as well, both were paint matched perfectly and we were surprised/happy. We did some research and picked a collision company that was across the US, and they didn't disappoint.

[kodyo]

Try the Mighty Car Mods easy dent removal way first!
[ame="https://www.youtube.com/watch?v=kpm7ewSU-to"]How to Fix Dents With a GoPro - YouTube[/ame]

[tennisfreak]

Damn that sucks.

On the bright side its only on the door so easier fix!