2JZ swapped BRZ ...

[Drift&Drag]

Originally Posted by rh9

I connected the aems CAN H wire to CAN H on the brz oem ecu and CAN L was grounded and EPS AND ABS worked ..but the immobilizer stopped working

I bought a racepak dash to the oem dash isnt as important now, I need need EPS AND ABS and keyless entry and the rest is sorted ..

Any new updates with your car?

[rh9]

Originally Posted by Drift&Drag

Any new updates with your car?

I spoke to chasebays and their last email was to try to twist the 2 can wires from the aem to the oem brz ecu, that didnt work

So I finally kept the CAN H CONNECTED from the aem to the brz ecu and CAN L to the ground, this way the EPS works/ABS and the keyless entry worked somehow lol

the gauges went off but that doesnt matter anymore as I have gone with haltech RACEPAK dash

thats it

[Drift&Drag]

Originally Posted by rh9

I spoke to chasebays and their last email was to try to twist the 2 can wires from the aem to the oem brz ecu, that didnt work

So I finally kept the CAN H CONNECTED from the aem to the brz ecu and CAN L to the ground, this way the EPS works/ABS and the keyless entry worked somehow lol

the gauges went off but that doesnt matter anymore as I have gone with haltech RACEPAK dash

thats it

Thanks for the update! A few of us are about to install the harness on our cars. Within a week or so, Alex should give us some of his feedback as well.


@slicktop @OmarGC

[slicktop]

Yeah, I started wiring last night. It won't be until next week that I start up, but I'll keep you guys posted on what I find.

[rh9]

Would love to know what everyone else is doing with their harnesses...let us know plz and post some pix