OFT v2.06 Non-Beta

[Grip Ronin]

how am i back getting the u0155 code? i thought this was disabled since we stopped using tunerpro? romraider doesnt show a switch for it..

[steve99]

Originally Posted by Grip Ronin

how am i back getting the u0155 code? i thought this was disabled since we stopped using tunerpro? romraider doesnt show a switch for it..

the oft definitions dont have all the extra cel code disable options that the romraider definitions have.

its possible to copy the xml code across or edit the romraider def calid to match your tune rom but you need to be verry carefull and understand what you are doing else you can brick your ecu.

for example oft 700/900/A00 A01C or D rom are actually B01C or D based.

[s2d4]

Originally Posted by Grip Ronin

how am i back getting the u0155 code? i thought this was disabled since we stopped using tunerpro? romraider doesnt show a switch for it..

That's a communication error.
Nothing tune related.

[Grip Ronin]

Originally Posted by steve99

the oft definitions dont have all the extra cel code disable options that the romraider definitions have.

its possible to copy the xml code across or edit the romraider def calid to match your tune rom but you need to be verry carefull and understand what you are doing else you can brick your ecu.

for example oft 700/900/A00 A01C or D rom are actually B01C or D based.

ya i dont know much about editing the ids and codes so im better of not messing with it lol

Originally Posted by s2d4

That's a communication error.
Nothing tune related.

ya i know. im not worried about it, its just annoying when it puts the car in limp mode. Rarely if i hit a bump too hard the plug shifts and the code is triggered.

[steve99]

Originally Posted by Grip Ronin

ya i dont know much about editing the ids and codes so im better of not messing with it lol



ya i know. im not worried about it, its just annoying when it puts the car in limp mode. Rarely if i hit a bump too hard the plug shifts and the code is triggered.

that p0155 might be in oft defs just have a look with romraider if itstheir just set to off and no moreproblems

[Grip Ronin]

Originally Posted by steve99

that p0155 might be in oft defs just have a look with romraider if itstheir just set to off and no moreproblems

ive checked. its a long list but there all "p" codes.

[s2d4]

Originally Posted by Grip Ronin

ya i know. im not worried about it, its just annoying when it puts the car in limp mode. Rarely if i hit a bump too hard the plug shifts and the code is triggered.

It has nothing to do tuner pro so not sure what you were thinking.

As for disabling, no one in their right mind would ignore CAN bus errors.

[DocWalt]

Anyone seen rather low LTFTs (-7% or so) at idle with 2.06 with the 91 octane UEL tune? I'm thinking I'll need to scale the MAF after I finish this round of mods.

[Target70]

Originally Posted by DocWalt

Anyone seen rather low LTFTs (-7% or so) at idle with 2.06 with the 91 octane UEL tune? I'm thinking I'll need to scale the MAF after I finish this round of mods.

Not the same setup, but running the 2.x phantom 93oct tune with UEL and I idle at (-6.25), and it never goes above 0.
http://datazap.me/u/target70/esc-93oct?log=0&data=6

[Grip Ronin]

Originally Posted by s2d4

It has nothing to do tuner pro so not sure what you were thinking.

As for disabling, no one in their right mind would ignore CAN bus errors.

i mentioned tuner pro because it had access to disable the code.

[DocWalt]

Originally Posted by Target70

Not the same setup, but running the 2.x phantom 93oct tune with UEL and I idle at (-6.25), and it never goes above 0.
http://datazap.me/u/target70/esc-93oct?log=0&data=6

I'd post my log as well, but OFM 1.14 is broken and I can't click the read button... Thanks for the log though!

[nunonuna]

Originally Posted by DocWalt

I'd post my log as well, but OFM 1.14 is broken and I can't click the read button... Thanks for the log though!

Try press "Tab" twice and "enter". It will read. Use this for now until they reslove the issue.

[dejxx]

just downloaded the newests maps for OFT, but i dont know wich one to use (DOM, US, C6, EU, Gulf, KS or EH). I use 2 types of gas. Argentinian 98 RON premium gas, and premium Brazilian gas at around 91-93 oct BUT it has 27,5% ethanol in it...
So, wich maps do i use @Shiv@Openflash?
Thanks!
(i use STP Octane Booster with the Brazilian gas)

[steve99]

Originally Posted by dejxx

just downloaded the newests maps for OFT, but i dont know wich one to use (DOM, US, C6, EU, Gulf, KS or EH). I use 2 types of gas. Argentinian 98 RON premium gas, and premium Brazilian gas at around 91-93 oct BUT it has 27,5% ethanol in it...
So, wich maps do i use @Shiv@Openflash?
Thanks!
(i use STP Octane Booster with the Brazilian gas)

Use the "Ecu Info" button on the OFT it will show you what your stock ECU Calibration ID is something like ZA1JA01G the last four letters are what you need, in this case G is your rom series and A01 is your rom revision.

Just fing the matching rom's in the OFT download and load the one you want into the OFT if your stock use stage 1 maps.

Try the 91 octane maps first log knock parameters see links below, if no knock then try the 93 maps.

see OFT TIPS link below.