Volk Racing ZE-40 18x10 +40 Square Setup - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

OmarGC · 11-29-2014, 01:12 PM

I'm going to say its your cars ride height causing all your poke. Our cars naturally camber as if they have UCA's and a ton of neg camber adjusted into em when lowered quite a bit... and then correct it with LCA's to pull the bottom of the wheel back in. That's the only explanation I could come up with lol... Because my rear quarters are only trimmed and I have minimal to no poke.

mav1178 · 11-29-2014, 03:16 PM

Comparison pics of TC105n 17x9" +35 vs ZE40 18x10" +40

TC105n:

Full lock clearance:

Rear wheel clearance vs e-brake bracket:

ZE40:

Full lock clearance:

Clearance w/ suspension loaded:

Rear wheel clearance vs e-brake bracket:

-alex

mav1178 · 11-29-2014, 03:23 PM

Needs more camber in rear. Ride height + wide angle lens makes it look worse than what it is...

Front is perfect.

Brake clearance is plenty.

-alex

Sportsguy83 · 07-29-2015, 12:34 PM

My current setup

Ze40 18X10

Michelin PSS 275/35/18 square

mav1178 · 07-29-2015, 03:58 PM

Quote:

Originally Posted by Sportsguy83

Nice brakes...

Sportsguy83 · 07-29-2015, 03:59 PM

Quote:

Originally Posted by mav1178

Nice brakes...

Lol thanks

, thanks for hooking me up

Sportsguy83 · 11-06-2015, 12:07 PM

@CSG Mike get these in the wheel directory

srizzors25 · 11-06-2015, 04:22 PM

Damn, I really like that look a lot. Those wheels are sweet. I'm surprised they don't rub at all with the car lowered. I rubbed in the rear with 8.5's at -2.0 camber....

NyC Zn6 · 11-06-2015, 04:47 PM

Quote:

Originally Posted by srizzors25

Damn, I really like that look a lot. Those wheels are sweet. I'm surprised they don't rub at all with the car lowered. I rubbed in the rear with 8.5's at -2.0 camber....

He has a raked setup

so when the rear droops he still has clearance..i love that setup.

Sportsguy83 · 11-06-2015, 05:38 PM

Quote:

Originally Posted by srizzors25

Damn, I really like that look a lot. Those wheels are sweet. I'm surprised they don't rub at all with the car lowered. I rubbed in the rear with 8.5's at -2.0 camber....

Previously I rubbed with 9.5's and 265's. It's all in "how low". I love the setup.

srizzors25 · 11-06-2015, 05:57 PM

Smart! I should do that! One of these days I'll get real wheels. I would love some 9.5's

SStratos · 09-20-2016, 04:52 AM

Which after market front fascia and splitter are you using for this car (the original Silver car pictured at the start of this thread)?

kch · 09-20-2016, 02:06 PM

Quote:

Originally Posted by SStratos

Which after market front fascia and splitter are you using for this car (the original Silver car pictured at the start of this thread)?

Varis non-widebody

vincelive123 · 09-20-2016, 03:30 PM

Quote:

Originally Posted by raytrix

Brand: Volk Racing
Model: ZE-40
Color: Matte Blue Gunmetal
Size: 18x10 +40
Weight: 19.2 lbs

Car spec:
Front - 18x10 +33 with 245/35 Hankook V12 Evo2
Front Camber - (-2.5)
Rear - 18x10 +40 with 255/35 Hankook V12 Evo2
Rear Camber - (-2.0)

If i would've seen this picture a lot sooner, I would've made my car look exactly/close to this set up.... But now its too late since i just cut my fenders for the Rocket bunny kit...

11-29-2014, 01:12 PM	#43
OmarGC My FR-S has 5 gears Join Date: Aug 2012 Drives: FRS/280z/Tundra Location: St. Louis Posts: 1,994 Thanks: 626 Thanked 1,065 Times in 572 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	I'm going to say its your cars ride height causing all your poke. Our cars naturally camber as if they have UCA's and a ton of neg camber adjusted into em when lowered quite a bit... and then correct it with LCA's to pull the bottom of the wheel back in. That's the only explanation I could come up with lol... Because my rear quarters are only trimmed and I have minimal to no poke. __________________ Omar GC 2JZ - 6870 - stock block - 1000whp? Instagram: 2jzus

11-06-2015, 04:22 PM	#50
srizzors25 Daedalus Moto Join Date: May 2014 Drives: 05 LGT Wagon, 08 R6 Race Bike Location: Sebastopol, CA Posts: 641 Thanks: 1,285 Thanked 693 Times in 365 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Damn, I really like that look a lot. Those wheels are sweet. I'm surprised they don't rub at all with the car lowered. I rubbed in the rear with 8.5's at -2.0 camber.... __________________

11-06-2015, 05:57 PM	#53
srizzors25 Daedalus Moto Join Date: May 2014 Drives: 05 LGT Wagon, 08 R6 Race Bike Location: Sebastopol, CA Posts: 641 Thanks: 1,285 Thanked 693 Times in 365 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Smart! I should do that! One of these days I'll get real wheels. I would love some 9.5's __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Directory: Volk Racing TE37 18x10.0 +44	Jesse@JDLAutodesign	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	59	12-14-2017 08:04 PM
245 square setup... Need advice	cjsporl1996	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	31	04-22-2014 05:06 AM
Which square or staggered setup should I go with?	switchlanez	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	50	01-07-2014 12:51 PM
FS/T: 18x10 Square Candy Teal XD9's	OmarGC	Wheels and Tires	30	09-01-2013 03:31 PM
Wheel Directory: Volk Racing TE37 17x9.5 +40 / 18x10.0 +44	RavSpec	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	33	04-16-2013 08:28 PM

11-29-2014, 03:16 PM	#44
mav1178 Senior Member Join Date: Apr 2013 Drives: 2005 Toyota Camry Location: 91745 Posts: 6,562 Thanks: 493 Thanked 6,097 Times in 3,029 Posts Mentioned: 95 Post(s) Tagged: 3 Thread(s)	Comparison pics of TC105n 17x9" +35 vs ZE40 18x10" +40 TC105n: Full lock clearance: Rear wheel clearance vs e-brake bracket: ZE40: Full lock clearance: Clearance w/ suspension loaded: Rear wheel clearance vs e-brake bracket: -alex

11-29-2014, 03:23 PM	#45
mav1178 Senior Member Join Date: Apr 2013 Drives: 2005 Toyota Camry Location: 91745 Posts: 6,562 Thanks: 493 Thanked 6,097 Times in 3,029 Posts Mentioned: 95 Post(s) Tagged: 3 Thread(s)	Needs more camber in rear. Ride height + wide angle lens makes it look worse than what it is... Front is perfect. Brake clearance is plenty. -alex

User Name		Remember Me?
Password