NW Marketplace v1.0 (CLOSED)

[Knickstape]

Originally Posted by Knickstape

Returning car to stock:

Perrin 2.5" intake (filter cleaned 400 miles ago)- $200
Carsmo Armrest- $100
Perrin 2.5" resonated CatBack (needs new V-Band clamps)- $600
Unichip with computer cord- $200

And lastly I have Clear Red Valenti Taillights that I would like to trade for stock ones plus $175.

Feel free to p.m. me any questions

Updated and prices lowered!

[Raven-mt]

Looking for stock header. Anyone want to get rid of theirs? Need it for cheap. Pm if you can help me out. Thanks

[fanaticalz]

Anyone with a Tomei type 80 CBE that is interested in trading for a 3" resonated perrin CBE?

[RobertPaulson]

Originally Posted by fanaticalz

Anyone with a Tomei type 80 CBE that is interested in trading for a 3" resonated perrin CBE?

why the switch?

[fanaticalz]

Originally Posted by RobertPaulson

why the switch?

bored, want to try a new single exit setup :P

[Ammunition]

I'm selling my genuine Toyota clear side markers [SOLD] that came to me straight from Japan.

They have been opti-coated by Thomas Dekany, so they are resistant to UV damage, fading, in addition to the coating being hydro-phobic.

I'm asking for $90 shipped OBO (the side markers cost me $100 before shipping, and I spent $50 getting them coated). They are in excellent condition, and have never had condensation. The felt lining was removed on them due to it being cheap, and getting maimed after one instance of installation and removal.

I want to note an issue I had with them though - I had great difficulty installing them, and getting them to set correctly. I'm not sure if this a fault on my end, or with the clips. The "B", and "C" clips are excellent, in good condition, and set correctly without issue - but the "A" clips gave me trouble when it came to installing them, and I had a hard time getting them to set correctly.

If the A clips are the issue, then a new one can be purchase from @fteightysix (see this post - http://www.ft86club.com/forums/showp...17&postcount=5)

Everyone that I've spoken with about these all said that the A clips are problematic, but it just takes force; I was too worried about using a lot of force when installing them, so I ended up purchasing a new pair, and that is why I'm selling my previous pair.

The only reason I purchased a new set of side markers instead of just replacing the A clips is because that option wasn't available to me (@fteightysix said they would be available on their website within a few days when I inquired about them after seeing the post that I've linked) - otherwise I would have absolutely done that (and saved about $150). In the end, the new pair that I purchased also gave me issues with getting the A clips set correctly.



I'm also selling my factory (orange) side markers - also opti-coated, no condensation issues, and the felt is in great condition. These could be installed, and uninstalled without issue, and didn't give me a problem like the clear side markers did.

I'm asking for $60 shipped OBO.



I'm offering these to forum members first before posting them up on eBay - here are additional images of both items - https://imgur.com/a/aAOGC#0

[Chen]

Originally Posted by Ammunition

I'm selling my genuine Toyota clear side markers that came to me straight from Japan.

They have been opti-coated by Thomas Dekany, so they are resistant to UV damage, fading, in addition to the coating being hydro-phobic.

I'm asking for $90 shipped OBO (the side markers cost me $100 before shipping, and I spent $50 getting them coated). They are in excellent condition, and have never had condensation. The felt lining was removed on them due to it being cheap, and getting maimed after one instance of installation and removal.

I want to note an issue I had with them though - I had great difficulty installing them, and getting them to set correctly. I'm not sure if this a fault on my end, or with the clips. The "B", and "C" clips are excellent, in good condition, and set correctly without issue - but the "A" clips gave me trouble when it came to installing them, and I had a hard time getting them to set correctly.

If the A clips are the issue, then a new one can be purchase from @fteightysix (see this post - http://www.ft86club.com/forums/showp...17&postcount=5)

Everyone that I've spoken with about these all said that the A clips are problematic, but it just takes force; I was too worried about using a lot of force when installing them, so I ended up purchasing a new pair, and that is why I'm selling my previous pair.

The only reason I purchased a new set of side markers instead of just replacing the A clips is because that option wasn't available to me (@fteightysix said they would be available on their website within a few days when I inquired about them after seeing the post that I've linked) - otherwise I would have absolutely done that (and saved about $150). In the end, the new pair that I purchased also gave me issues with getting the A clips set correctly.



I'm also selling my factory (orange) side markers - also opti-coated, no condensation issues, and the felt is in great condition. These could be installed, and uninstalled without issue, and didn't give me a problem like the clear side markers did.

I'm asking for $60 shipped OBO.



I'm offering these to forum members first before posting them up on eBay - here are additional images of both items - https://imgur.com/a/aAOGC#0

Interested in the clears!

[BRZPDX]

Originally Posted by BRZPDX

Brand new 2.75in Perrin intake, Silver color, Red silicone inlet hose, x2 clamps = $200
OEM SWP Hood, 20k miles, has 3M shield on it = $350
OEM Front pipe = just come get the damn thing from me.

1 of 2 exhaust will be on sale, depending on which one I like the best with my current set up: Sold
Perrin 2.5in Exhaust used about 20k miles, resonated (residue oil in the muffler, tried to clean it out as much as possible)= $400
Invidia Q300 Exhaust used about 20k miles, resonated Titanium tip = $350

Eibach Sportline Springs, used about 10k miles, + OEM strut about 5k miles with springs = $250, just springs $140 Sale Pending

Updated

[Raven-mt]

Anyone have a stock front pipe in Washington that they want out of their garage? I can come get it.

[Yamaha_R6]

Originally Posted by Raven-mt

Anyone have a stock front pipe in Washington that they want out of their garage? I can come get it.

Send me a PM if you want it.

[206_ft86]

Anyone with a tomei type 80 cbe for sale?

[k3l3ka]

Anyone interested in a mint condition STi front lip?

Located in Seattle area.

$300 obo.

[DarrenDriven]

Clearing out the garage.

Eibach Pro Kit 1.0" springs $150 (used)
Eibach Sportline 1.4" springs $140 (used) SOLD
Stock Strut Set $100 (used, 3000 miles)
Rota Torque set 17x9.0 +30 w/ stock FR-S tires stretched $850
single FR-S stock wheel in excellent condition $100

[Lverasky]

Originally Posted by DarrenDriven

Clearing out the garage.

Eibach Pro Kit 1.0" springs $150 (used)
Eibach Sportline 1.4" springs $140 (used)
Stock Strut Set $100 (used, 3000 miles)
Rota Torque set 17x9.0 +30 w/ stock FR-S tires stretched $850
single FR-S stock wheel in excellent condition $100

how many miles on the Eibach Pro Kit 1.0" springs??? i might want it.