Official OpenFlash Tablet FA20 Tuning Tech Discussion Thread - Page 146 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

ZZT86 · 09-30-2014, 10:49 PM

I must admit mine is also behaving oddly even before upgrading to 1.11.1 (it launches & within seconds stops it's WiFi check, updates etc) although I reckon something else is amiss on my old IBM PC running XP with Norton 360 failing to stay running. I may have to either try a repair or reformat the old dog as I'm still in the process of getting a MacPro up to speed to run Win8Pro :/

steve99 · 10-01-2014, 04:56 AM

Quote:

Originally Posted by ZZT86

I must admit mine is also behaving oddly even before upgrading to 1.11.1 (it launches & within seconds stops it's WiFi check, updates etc) although I reckon something else is amiss on my old IBM PC running XP with Norton 360 failing to stay running. I may have to either try a repair or reformat the old dog as I'm still in the process of getting a MacPro up to speed to run Win8Pro :/

mine updated fine to 1.11.1 last night

Stumpygt86 · 10-01-2014, 06:37 AM

I found that since it is a new version my antivirus was causing issues as only a few people had used it previously. The more people that update the OFM, the less likely the antivirus will have issues with it

phrosty · 10-01-2014, 10:53 AM

Anyone notice that the OpenFlash posts under Commercial Classifieds are no longer active?

SOAZ · 10-01-2014, 10:58 AM

Quote:

Originally Posted by phrosty

Anyone notice that the OpenFlash posts under Commercial Classifieds are no longer active?

Noticed that. The big OFH thread is dead at the moment.

phrosty · 10-01-2014, 11:08 AM

It looks like the OpenFlash guys are no longer forum sponsors, that's why.

Shiv@Openflash · 10-01-2014, 11:15 AM

Quote:

Originally Posted by phrosty

It looks like the OpenFlash guys are no longer forum sponsors, that's why.

Was a couple hours late in paying vendor fees. Should be back up and vending later today

ck-GT86 · 10-01-2014, 11:15 PM

Hope you guys get a chance to look at this: http://www.ft86club.com/forums/showthread.php?t=75238

.ck

ray7792 · 10-05-2014, 03:13 AM

Hey,
If someone has a little time to spare, could you look at my log and tell me if everythings alright?
Just put in a new OP, hoping to stop a very annoying leak. Pedal response is much better, but maybe a little bit off? not sure.

Log said I had cylinder 2 misfire =/...happened during no throttle.

http://www.datazap.me/u/ray7792/new-...2-3-5-6-7-9-12
OFT stage 2 93

Thank you!!

steve99 · 10-05-2014, 04:42 AM

Quote:

Originally Posted by ray7792

Hey,
If someone has a little time to spare, could you look at my log and tell me if everythings alright?
Just put in a new OP, hoping to stop a very annoying leak. Pedal response is much better, but maybe a little bit off? not sure.

Log said I had cylinder 2 misfire =/...happened during no throttle.

http://www.datazap.me/u/ray7792/new-...2-3-5-6-7-9-12
OFT stage 2 93

Thank you!!

Dont think that misfire is anything to be too concerned about unless it becomes frequent and repeatable. and it may be due to you running quite rich.

You ltft look good less than 4% but you seem to be runnig a bit on the rich side 11.25 all the way through midrange to higher rpm seems very consistent almost too consistent its just looks sus.

try logging wideband afr with oft that will look at second 02 sensor input and see if it reads similarly stable it just weird is so rich and stable with low fuel trims.

ray7792 · 10-05-2014, 10:45 AM

Quote:

Originally Posted by steve99

Dont think that misfire is anything to be too concerned about unless it becomes frequent and repeatable. and it may be due to you running quite rich.

You ltft look good less than 4% but you seem to be runnig a bit on the rich side 11.25 all the way through midrange to higher rpm seems very consistent almost too consistent its just looks sus.

try logging wideband afr with oft that will look at second 02 sensor input and see if it reads similarly stable it just weird is so rich and stable with low fuel trims.

Hey Steve, thanks so much for looking at it!
oh, apparently the reason for the rich afr is due to my FA20club CAI. Vishnu said everyone that has one runs 11.25 for some reason lol.

Thanks again!

tonystewart · 10-05-2014, 10:53 AM

Did you scale the maf with your FA20cai ?

Sent from my iPad using Tapatalk

phrosty · 10-05-2014, 02:08 PM

Quote:

Originally Posted by Shiv@Openflash

Was a couple hours late in paying vendor fees. Should be back up and vending later today

The OFT and OFH threads in Commercial Classifieds are still closed. Is there a plan to open them back up?

Necric · 10-23-2014, 02:44 PM

Getting error 0x65, problem reading from device. And when I try to upgrade I get missing file AUTOCST.LST

10-01-2014, 10:53 AM	#2034
phrosty Senior Member Join Date: Apr 2013 Drives: 2013 FR-S Location: Seattle Posts: 806 Thanks: 202 Thanked 321 Times in 199 Posts Mentioned: 18 Post(s)	Anyone notice that the OpenFlash posts under Commercial Classifieds are no longer active? __________________ 2013 Whiteout 6AT FR-S \| Perrin Inlet Tube + 2.75" CAI \| OpenFlash Header \| P&L Catback \| 4.88 Final Drive \| Dialed in OFT 2.0x Stage 2 E85 \| 18x8 Enkei Raijin + 225/40 Michelin Pilot Super Sport \| 17x7 Stock + 215/45 Michelin X-Ice Xi-2

10-01-2014, 11:08 AM	#2036
phrosty Senior Member Join Date: Apr 2013 Drives: 2013 FR-S Location: Seattle Posts: 806 Thanks: 202 Thanked 321 Times in 199 Posts Mentioned: 18 Post(s)	It looks like the OpenFlash guys are no longer forum sponsors, that's why. __________________ 2013 Whiteout 6AT FR-S \| Perrin Inlet Tube + 2.75" CAI \| OpenFlash Header \| P&L Catback \| 4.88 Final Drive \| Dialed in OFT 2.0x Stage 2 E85 \| 18x8 Enkei Raijin + 225/40 Michelin Pilot Super Sport \| 17x7 Stock + 215/45 Michelin X-Ice Xi-2

10-01-2014, 11:15 PM	#2038
ck-GT86 Senior Member Join Date: Aug 2013 Drives: '13 Raven FR-S, MT Location: NorCal Posts: 884 Thanks: 788 Thanked 516 Times in 286 Posts Mentioned: 54 Post(s)	Hope you guys get a chance to look at this: http://www.ft86club.com/forums/showthread.php?t=75238 .ck __________________ \|\| My Build Thread \|\|

10-05-2014, 03:13 AM	#2039
ray7792 Senior Member Join Date: Feb 2013 Drives: AT 2013 BRZ Limited Location: NJ, USA Posts: 133 Thanks: 21 Thanked 34 Times in 25 Posts Mentioned: 3 Post(s)	Hey, If someone has a little time to spare, could you look at my log and tell me if everythings alright? Just put in a new OP, hoping to stop a very annoying leak. Pedal response is much better, but maybe a little bit off? not sure. Log said I had cylinder 2 misfire =/...happened during no throttle. http://www.datazap.me/u/ray7792/new-...2-3-5-6-7-9-12 OFT stage 2 93 Thank you!! __________________ '13 BRZ (sold) '17 STI

10-05-2014, 10:53 AM	#2042
tonystewart Senior Member Join Date: May 2012 Drives: 2013 Scion FR-S Raven Location: Lake Worth Florida Posts: 1,182 Thanks: 76 Thanked 373 Times in 253 Posts Mentioned: 13 Post(s)	Did you scale the maf with your FA20cai ? Sent from my iPad using Tapatalk __________________ May'12 AT Raven, OFT V2, Perrin IntakeTube, Pulley & Overpipe,HKS Snorkel,FA20 EL Header,Nameless Frontpipe w/ Helmholtz, Crawford AOS, Cusco O2W Cooler, Grimmspeed Strut/MC Brace, Winjets w/D2S 3.0 HID by Illuminating Lighworkx, Fogs w/EU Stalk, LED's, JDM UnderPanels, Diffuser, Rigid Collars, Whiteline, HVT Camber Plates, Koni's, Swift Springs, GTSpec LCA, SPC Toearms, DBA 4K T-Slot Rotors, Ferodo DS2500, Vorshlag BrakeLines, MichelinPSS, 5Axis Wing, Raammat, Ensolite, JPM Coachworks, OEM+Ref400, 20mmspacers, TOMS

09-30-2014, 10:49 PM	#2031
ZZT86 Senior Member Join Date: Jul 2012 Drives: BR86 Location: Location Posts: 841 Thanks: 310 Thanked 146 Times in 114 Posts Mentioned: 5 Post(s)	I must admit mine is also behaving oddly even before upgrading to 1.11.1 (it launches & within seconds stops it's WiFi check, updates etc) although I reckon something else is amiss on my old IBM PC running XP with Norton 360 failing to stay running. I may have to either try a repair or reformat the old dog as I'm still in the process of getting a MacPro up to speed to run Win8Pro :/

10-01-2014, 06:37 AM	#2033
Stumpygt86 Member Join Date: Aug 2014 Drives: Toyota GT86. N/A for life Location: Australia Posts: 45 Thanks: 27 Thanked 4 Times in 3 Posts Mentioned: 0 Post(s)	I found that since it is a new version my antivirus was causing issues as only a few people had used it previously. The more people that update the OFM, the less likely the antivirus will have issues with it

10-23-2014, 02:44 PM	#2044
Necric Member Join Date: Jul 2013 Drives: 2013 FR-S Location: South Carolina Posts: 38 Thanks: 2 Thanked 2 Times in 2 Posts Mentioned: 3 Post(s)	Getting error 0x65, problem reading from device. And when I try to upgrade I get missing file AUTOCST.LST

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFlash Tablet	Rombinhood@OpenFlash	Software Tuning	1838	07-29-2023 06:35 PM
OpenFlash Tablet Stg 2 Tune (Dyno Progress)	Rombinhood@OpenFlash	Software Tuning	26	10-24-2013 01:19 PM
FBM Tuning fixed my issue, FA20 and Visconti didn't work as well	whitefrs	Forced Induction	253	08-19-2013 12:39 PM
Official MMA Thread	zigzagz94	Off-Topic Lounge [WARNING: NO POLITICS]	11	12-15-2009 10:59 PM

User Name		Remember Me?
Password