Disabling "panic brake..?" with OFT. - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Thorpedo · 10-16-2014, 11:19 AM

I've searched, I don't think I know the correct terminology though. I want to disable the power cut when engaging both the gas and the brake. I always do the pedal dance when autocrossing but it does not disable this feature. Is this feature even called panic brake? Can it be eliminated with the OFT?

Thanks

Silver Ignition · 10-16-2014, 12:55 PM

You're probably thinking of Toyota's "Smart Stop Technology" to address unintended acceleration. Not sure if OFT can disable this but I'm subscribed to find out.

@Shiv@Openflash

Shiv@Openflash · 10-16-2014, 02:15 PM

That's going to be a tough one

GotBRZ1691 · 10-16-2014, 02:22 PM

Quote:

Originally Posted by Shiv@Openflash

That's going to be a tough one

Do I hear a challenge!

AP756 · 10-16-2014, 02:43 PM

@Thorpedo: Try to stop the brake pedal switch working for the pedal travel you use during an autocrossing event (NOT for road use!). No signal from pedal -> no switching off power. I'd try to disadjust the switch in a way that it works very late (but still works). This way other systems and race control might not complain, even the brake lights work (ok, a bit late

) ...

Silver Ignition · 10-16-2014, 03:24 PM

Quote:

Originally Posted by AP756

@Thorpedo: Try to stop the brake pedal switch working for the pedal travel you use during an autocrossing event (NOT for road use!). No signal from pedal -> no switching off power. I'd try to disadjust the switch in a way that it works very late (but still works). This way other systems and race control might not complain, even the brake lights work (ok, a bit late

) ...

That sounds unsafe. Why not just unplug the sensor while you're at autox? You don't need brake lights, you're the only one out there...

Thorpedo · 10-16-2014, 04:00 PM

Thanks for the response guys. I have thought of unplugging the sensor but obviously there are downfalls this (most of them involving my horrible memory)

Between this and live tire pressure @Shiv@Openflash should have lots to do! Lol

Any other ideas?

Boss Paco · 10-17-2014, 01:09 AM

Brake override system or BOS is what Subaru calls it. Sucks ass cos I can't brake boost!

SmsAlSuwaidi · 10-17-2014, 01:14 AM

Quote:

Originally Posted by Boss Paco

Brake override system or BOS is what Subaru calls it. Sucks ass cos I can't brake boost!

i'm surprised, i can brake boost but not properly still get half way or so

wparsons · 10-17-2014, 01:01 PM

I'm confused on this as well... I can left foot brake and definitely don't get throttle cutting at all.

I can log/video it if anyone wants to see it, but I can be driving and floor both pedals without anything cutting out.

Silver Ignition · 10-17-2014, 01:17 PM

Quote:

Originally Posted by wparsons

I'm confused on this as well... I can left foot brake and definitely don't get throttle cutting at all.

I can log/video it if anyone wants to see it, but I can be driving and floor both pedals without anything cutting out.

It might be a USDM thing because us Americans can't drive without doing something else at the same time...

gramicci101 · 10-17-2014, 02:00 PM

Quote:

Originally Posted by Silver Ignition

It might be a USDM thing because us Americans can't drive without doing something else at the same time...

I mean, I usually just drive and text or drive and eat. I guess I could use both pedals at the same time.

wparsons · 10-17-2014, 02:04 PM

Quote:

Originally Posted by Silver Ignition

It might be a USDM thing because us Americans can't drive without doing something else at the same time...

I can't imagine the Canadian cars wouldn't have it if the US cars do, but anything is possible.

Anyone that has experienced this engaging, what are you doing to make it happen. I want to try to recreate it now.

Thorpedo · 10-17-2014, 11:15 PM

Easiest way? Try to do a burnout and engage the brake after getting it spinning to keep from moving. At the strip is where I encountered this problem.

10-16-2014, 11:19 AM	#1
Thorpedo The SquadWhisperer Join Date: Mar 2013 Drives: '13 Ultramarine FR-S (STX) Location: Nova Scotia, Canada Posts: 681 Thanks: 383 Thanked 477 Times in 207 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	Disabling "panic brake..?" with OFT. I've searched, I don't think I know the correct terminology though. I want to disable the power cut when engaging both the gas and the brake. I always do the pedal dance when autocrossing but it does not disable this feature. Is this feature even called panic brake? Can it be eliminated with the OFT? Thanks __________________ 2013+14+15 Atlantic Region Motor Sports Autocross STX Champion 2013+14+15 Atlantic Region Motor Sports Overall Autocross Champion 2017 Bluenose Autosport Club Overall Rallycross Champion Powered by Great North Performance, Jani-King Canada, and OK Tire.

10-16-2014, 04:00 PM	#7
Thorpedo The SquadWhisperer Join Date: Mar 2013 Drives: '13 Ultramarine FR-S (STX) Location: Nova Scotia, Canada Posts: 681 Thanks: 383 Thanked 477 Times in 207 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	Thanks for the response guys. I have thought of unplugging the sensor but obviously there are downfalls this (most of them involving my horrible memory) Between this and live tire pressure @Shiv@Openflash should have lots to do! Lol Any other ideas? __________________ 2013+14+15 Atlantic Region Motor Sports Autocross STX Champion 2013+14+15 Atlantic Region Motor Sports Overall Autocross Champion 2017 Bluenose Autosport Club Overall Rallycross Champion Powered by Great North Performance, Jani-King Canada, and OK Tire.

10-17-2014, 11:15 PM	#14
Thorpedo The SquadWhisperer Join Date: Mar 2013 Drives: '13 Ultramarine FR-S (STX) Location: Nova Scotia, Canada Posts: 681 Thanks: 383 Thanked 477 Times in 207 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	Easiest way? Try to do a burnout and engage the brake after getting it spinning to keep from moving. At the strip is where I encountered this problem. __________________ 2013+14+15 Atlantic Region Motor Sports Autocross STX Champion 2013+14+15 Atlantic Region Motor Sports Overall Autocross Champion 2017 Bluenose Autosport Club Overall Rallycross Champion Powered by Great North Performance, Jani-King Canada, and OK Tire.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
E-Brake issue "clunking noise" when pulling the e-brake while rolling.	Kinzo	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	55	06-20-2018 11:14 PM
Anyone doing brake bleeding with the "Gravity Method"?	Hanakuso	Mechanical Maintenance (Oil, Fluids, Break-In, Servicing)	11	03-03-2013 03:53 PM
"Official" Suspension/Brake Thread	NYC BRZ	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	27	06-27-2012 10:14 PM
Parking/Emergency Brake - "Clunk"	EsoBOFH	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	6	06-24-2012 12:43 PM
Limited gets brake "upgrade" over Premium - Canada only?	Sport-Tech	BRZ First-Gen (2012+) — General Topics	25	05-15-2012 01:35 AM

10-16-2014, 02:15 PM	#3
Shiv@Openflash Senior Member Join Date: Sep 2013 Drives: 2013 FRS Location: SF, CA Posts: 2,629 Thanks: 1,055 Thanked 5,470 Times in 1,494 Posts Mentioned: 605 Post(s) Tagged: 9 Thread(s)	That's going to be a tough one

10-16-2014, 02:43 PM	#5
AP756 Member Join Date: Jun 2014 Drives: GT86 Toyota Location: Germany Posts: 22 Thanks: 7 Thanked 9 Times in 5 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	@Thorpedo: Try to stop the brake pedal switch working for the pedal travel you use during an autocrossing event (NOT for road use!). No signal from pedal -> no switching off power. I'd try to disadjust the switch in a way that it works very late (but still works). This way other systems and race control might not complain, even the brake lights work (ok, a bit late ) ...

User Name		Remember Me?
Password