FR-S OEM Foglights Question

[gepeyo]

By chance does anyone know the lumens that the OEM Foglights bulbs? I drive a 10series and I am referring to the Foglights that came out when the 10series came out.

Also does anyone if the OEM BRZ foglights are the same exact size as the FRS ones? I wanted to pick up the yellow film for my foglight, but i was worried because the one i wanted were for "BRZs".

[Wizardhat]

Lamin-x has 4" x 8" universal sheets in yellow for 7.95 plus shipping. Cut it in half. Apply each piece to the fog lights, trim the excess and you are done. I used the blue tint on mine. Easy to install, took all of 5 minutes. Available at their website.

[gepeyo]

Originally Posted by Wizardhat

Lamin-x has 4" x 8" universal sheets in yellow for 7.95 plus shipping. Cut it in half. Apply each piece to the fog lights, trim the excess and you are done. I used the blue tint on mine. Easy to install, took all of 5 minutes. Available at their website.

Do you know if the Lumen-X BRZ foglight covers are the same exact size as the FR-S foglights?

[Wizardhat]

Originally Posted by gepeyo

Do you know if the Lumen-X BRZ foglight covers are the same exact size as the FR-S foglights?

No. You could call them to ask directly and order ones that fit if that was needed. They do custom cuts. If you use a universal sheet the bezel finishes the edge after trimming. The bezels come off easily with a trim removal tool that you can get at Harbor Freight for example. Package of 4 tools for around $6 I think.