Work Meister S1R New Size 17" - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

mike_frs · 08-07-2014, 12:52 PM

Original Post:
Just ordered a set of 17" Work Meister S1R's. Anybody else have them? I tried searching but couldn't find anything.

neilr · 08-07-2014, 01:39 PM

Do you have a particular question about them? I don't have them and therefore don't have any answers, but if you clarify what you're interested in, someone might be able to help. FWIW, there are 4 entries in the wheel directory for that wheel, albeit in an 18" diameter.

Manufacturer link, in case anyone needed it.

mike_frs · 08-07-2014, 02:47 PM

Quote:

Originally Posted by neilr

Do you have a particular question about them? I don't have them and therefore don't have any answers, but if you clarify what you're interested in, someone might be able to help. FWIW, there are 4 entries in the wheel directory for that wheel, albeit in an 18" diameter.

Manufacturer link, in case anyone needed it.

I'm just curious on what they are going to look like. No one has them in 17" as far as I know of. I've seen 18" yes. But I'm assuming 17" will look different on our cars.

stevethuro · 08-07-2014, 02:52 PM

what width and offset did you get?

mike_frs · 08-07-2014, 05:30 PM

Quote:

Originally Posted by stevethuro

what width and offset did you get?

These were the full detailed specs of the wheels I ordered:

Work Meister S1R 2pc Wheels
Fahrenheit Silver (FSII) Centers w/Anodized Barrel Lips
17x9.5"
-6 Offset
O-Disk
136mm/5.44in Lips
5x100
w/Type A Center Caps

Vten · 08-07-2014, 08:11 PM

-6 offsets ? Wide body ?

OICU812 · 08-07-2014, 10:48 PM

Quote:

Originally Posted by Vten

-6 offsets ? Wide body ?

^^^ This.... I would hope so otherwise that is a VERY odd offset to say least...

dizzario · 08-08-2014, 12:31 AM

...they're going to look like all other Meisters.

Are you referring to 'on the car' specifically? Look at my car in my build thread. They're not Meisters but they're 17". If you're concerned about them looking too small then just make sure you get a decent tire size. 18" is too much wheel for this car but that's just my opinion.

The 18" Meisters weigh nearly 20lbs iirc.

Turdinator · 08-08-2014, 01:54 AM

In for photos when they are on. Should look pretty good on a widebody.

Or really stupid on a stock car.

Firestorm_86 · 08-08-2014, 12:28 PM

In for photos.

mike_frs · 08-08-2014, 01:03 PM

Quote:

Originally Posted by dizzario

...they're going to look like all other Meisters.

Are you referring to 'on the car' specifically? Look at my car in my build thread. They're not Meisters but they're 17". If you're concerned about them looking too small then just make sure you get a decent tire size. 18" is too much wheel for this car but that's just my opinion.

The 18" Meisters weigh nearly 20lbs iirc.

I'm referring to both on and off the car. I'm just curious on what they actually look like. But I'm assuming no one has purchased them yet and posted pictures online.

I agree with you on 18" is too much wheel for our cars. That's just my opinion as well. I see a lot of people getting 18" wheels for our cars but I'm assuming they are doing it for looks/show. Nothing wrong with that, but I think you can also use 17" for looks/show on our cars too.

mike_frs · 10-17-2014, 01:17 PM

Wheels finally came in!

stevethuro · 10-17-2014, 02:02 PM

deep! I just bought the same wheels 18x9.5 +25 O-disc... but it will be awhile until they are mounted. Wedding planning makes you broke.

mike_frs · 10-17-2014, 02:09 PM

Quote:

Originally Posted by stevethuro

deep! I just bought the same wheels 18x9.5 +25 O-disc... but it will be awhile until they are mounted. Wedding planning makes you broke.

Oh nice! Yeah man I'm not looking forward to that. Congrats btw! (Wedding and Wheels) haha!

08-07-2014, 12:52 PM	#1
mike_frs Senior Member Join Date: Nov 2013 Drives: 2015 Subaru BRZ Limited Location: Fairfield/San Bruno, CA Posts: 131 Thanks: 25 Thanked 81 Times in 47 Posts Mentioned: 2 Post(s)	Work Meister S1R New Size 17" Original Post: Just ordered a set of 17" Work Meister S1R's. Anybody else have them? I tried searching but couldn't find anything. Last edited by mike_frs; 01-12-2015 at 12:39 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Work Wheels: CR-Kiwami / XD-9 / Meister S1R / Meister S1 3pc	Touge Factory	Wheels and Tires	141	06-09-2015 07:35 PM
WTB: 5x100 18" Work Meister S1's or SSR SP1's	asphaltkyle	Wheels and Tires	1	04-15-2014 09:48 PM
WORK Meister M1 (Mesh + Step Lip) and Meister S13P (Spoke + Step Lip)	RavSpec	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	6	12-15-2013 07:45 PM
WORK Meister M1 (Mesh + Step Lip) and Meister S13P (Spoke + Step Lip)	RavSpec	Wheels and Tires	1	12-10-2013 09:42 PM
WORK Meister S1R - 17"/18"/19" Any Spec --- Winter Promotion - end 10/31/13 !!!!!	RavSpec	Wheels and Tires	1	10-28-2013 11:31 PM

08-07-2014, 01:39 PM	#2
neilr Member Join Date: Feb 2013 Drives: 2018 Cayman, 2013 FR-S Location: Hillsboro, OR Posts: 55 Thanks: 15 Thanked 11 Times in 9 Posts Mentioned: 2 Post(s)	Do you have a particular question about them? I don't have them and therefore don't have any answers, but if you clarify what you're interested in, someone might be able to help. FWIW, there are 4 entries in the wheel directory for that wheel, albeit in an 18" diameter. Manufacturer link, in case anyone needed it.

08-07-2014, 02:52 PM	#4
stevethuro Member Join Date: Apr 2014 Drives: 2013 Scion FRS 10 Series Location: Charlotte NC Posts: 79 Thanks: 24 Thanked 14 Times in 10 Posts Mentioned: 1 Post(s)	what width and offset did you get?

08-07-2014, 08:11 PM	#6
Vten Senior Member Join Date: Aug 2012 Drives: Too heavy Location: Columbus Posts: 788 Thanks: 91 Thanked 288 Times in 186 Posts Mentioned: 7 Post(s)	-6 offsets ? Wide body ?

08-08-2014, 12:31 AM	#8
dizzario Banned Join Date: Jul 2013 Drives: FRS Location: San Diego Posts: 568 Thanks: 121 Thanked 181 Times in 112 Posts Mentioned: 8 Post(s)	...they're going to look like all other Meisters. Are you referring to 'on the car' specifically? Look at my car in my build thread. They're not Meisters but they're 17". If you're concerned about them looking too small then just make sure you get a decent tire size. 18" is too much wheel for this car but that's just my opinion. The 18" Meisters weigh nearly 20lbs iirc.

08-08-2014, 12:28 PM	#10
Firestorm_86 Senior Member Join Date: Sep 2013 Drives: FRS Location: ATL Posts: 297 Thanks: 114 Thanked 67 Times in 44 Posts Mentioned: 3 Post(s)	In for photos.

10-17-2014, 01:17 PM	#12
mike_frs Senior Member Join Date: Nov 2013 Drives: 2015 Subaru BRZ Limited Location: Fairfield/San Bruno, CA Posts: 131 Thanks: 25 Thanked 81 Times in 47 Posts Mentioned: 2 Post(s)	Wheels finally came in!

10-17-2014, 02:02 PM	#13
stevethuro Member Join Date: Apr 2014 Drives: 2013 Scion FRS 10 Series Location: Charlotte NC Posts: 79 Thanks: 24 Thanked 14 Times in 10 Posts Mentioned: 1 Post(s)	deep! I just bought the same wheels 18x9.5 +25 O-disc... but it will be awhile until they are mounted. Wedding planning makes you broke.

User Name		Remember Me?
Password