Work Meister S1R New Size 17"
 

http://i248.photobucket.com/albums/g...ps03c0a8b7.jpg
http://i248.photobucket.com/albums/g...ps6e5138aa.jpg
http://i248.photobucket.com/albums/g...psc90203c7.png
http://i248.photobucket.com/albums/g...ps4b16dc57.png
http://i248.photobucket.com/albums/g...ps16403a26.png
http://i248.photobucket.com/albums/g...ps7382f0b3.png
http://i248.photobucket.com/albums/g...ps835296df.png
http://i248.photobucket.com/albums/g...psfde03314.png
http://i248.photobucket.com/albums/g...ps7f137024.png
http://i248.photobucket.com/albums/g...psfba2c393.png
http://i248.photobucket.com/albums/g...ps133024c3.jpg
http://i248.photobucket.com/albums/g...ps6111f81f.png

Original Post:
Just ordered a set of 17" Work Meister S1R's. Anybody else have them? I tried searching but couldn't find anything.

Do you have a particular question about them? I don't have them and therefore don't have any answers, but if you clarify what you're interested in, someone might be able to help. FWIW, there are 4 entries in the wheel directory for that wheel, albeit in an 18" diameter.

Manufacturer link, in case anyone needed it.

I'm just curious on what they are going to look like. No one has them in 17" as far as I know of. I've seen 18" yes. But I'm assuming 17" will look different on our cars.

what width and offset did you get?

These were the full detailed specs of the wheels I ordered:

Work Meister S1R 2pc Wheels
Fahrenheit Silver (FSII) Centers w/Anodized Barrel Lips
17x9.5"
-6 Offset
O-Disk
136mm/5.44in Lips
5x100
w/Type A Center Caps

-6 offsets ? Wide body ?

^^^ This.... I would hope so otherwise that is a VERY odd offset to say least...

...they're going to look like all other Meisters.

Are you referring to 'on the car' specifically? Look at my car in my build thread. They're not Meisters but they're 17". If you're concerned about them looking too small then just make sure you get a decent tire size. 18" is too much wheel for this car but that's just my opinion.

The 18" Meisters weigh nearly 20lbs iirc.

In for photos when they are on. Should look pretty good on a widebody.

Or really stupid on a stock car.

In for photos.

I'm referring to both on and off the car. I'm just curious on what they actually look like. But I'm assuming no one has purchased them yet and posted pictures online.

I agree with you on 18" is too much wheel for our cars. That's just my opinion as well. I see a lot of people getting 18" wheels for our cars but I'm assuming they are doing it for looks/show. Nothing wrong with that, but I think you can also use 17" for looks/show on our cars too.

Wheels finally came in!http://i248.photobucket.com/albums/g...ps59e53a88.jpg
http://i248.photobucket.com/albums/g...psda58ff49.jpg

deep! I just bought the same wheels 18x9.5 +25 O-disc... but it will be awhile until they are mounted. Wedding planning makes you broke.

Oh nice! Yeah man I'm not looking forward to that. Congrats btw! (Wedding and Wheels) haha!