FT-86 SpeedFactory Catted UEL Header

[FT-86 SpeedFactory]

Originally Posted by kodyo

You can still get a CEL with a high flow cat, especially if running other exhaust/intake bits. I'd get a tune if I were you or put back some stock pieces (assuming you aren't stock).

This is not a high flow cat. The cat is rated for 5 liters of airflow and clears emissions in 49 states. No CEL should be thrown unless something else is happening.

Originally Posted by Sypher

there is no science behind this but i think the CEL is coming from running too lean. each "bolt on" leans the car out on the stock tune. especially the drop in filters. just my guess though.

Correct. The car can and will run leaner as more mods are added. We tested this system on a 100% stock car minus the header for 4K miles. We did this because at the time the community was up in arms about no one doing a header test on a stock car or results of it.

Originally Posted by STV3

Even with the defouler the CEL came right back today. Guess I'll try a new O2 sensor

Yeah something is up. Let me know how the new sensor does. Any other mods to the car? Intake? If so which one?

[TrogDor the Burninator]

One last video add of the in-cabin sound experience with this header. Sorry for the commentary ahead of time!

Loving the header the more I drive on it. It's a great modification!

[ame="https://www.youtube.com/watch?v=m-bEAUm3dAs"]FT-86 SpeedFactory Catted UEL Header - In cabin Sound Experience and Commentary - YouTube[/ame]

[Tenchi]

Originally Posted by nunonuna

Nice~ How does it sound in cabin compare to before header install?
I have very similar set up but perrin op + tomei fp + q300. I think mine would sound like yours since op & fp are just pipe and there are no huge difference among those. After I heard yours, Im more desperate waiting for mine, but it wont be any soon~ lol

In cabin was noticeably louder after install. No drone in cabin still but with both windows down you can clearly hear how sexy the exhaust sounds from behind the car. After the Q300 warms up it can get reallly loud! Even though I was disappointed when I first installed the Q300 because it was so quiet, after all these exhaust mods it became perfectly balanced and exactly what I wanted.


Sent from my iPhone using Tapatalk

[nunonuna]

Originally Posted by Tenchi

In cabin was noticeably louder after install. No drone in cabin still but with both windows down you can clearly hear how sexy the exhaust sounds from behind the car. After the Q300 warms up it can get reallly loud! Even though I was disappointed when I first installed the Q300 because it was so quiet, after all these exhaust mods it became perfectly balanced and exactly what I wanted.


Sent from my iPhone using Tapatalk

Great!!
I was also little disappointed after I swap my n1 to q300 & still want little more loudness even with op + fp, but now, I have faith that this header will make me happy~~

[Tenchi]

Originally Posted by nunonuna

Great!!

I was also little disappointed after I swap my n1 to q300 & still want little more loudness even with op + fp, but now, I have faith that this header will make me happy~~

No worries! You'll love it!


Sent from my iPhone using Tapatalk

[CamryDS]

installation being done today -- very excited, will post videos of before and after for exhaust sounds.

[STV3]

Originally Posted by FT-86 SpeedFactory

Yeah something is up. Let me know how the new sensor does. Any other mods to the car? Intake? If so which one?

Only other mods are a blitz drop in filter and a Motiv catted front pipe. Everything else is stock.

My CEL comes back about 50 miles after I reset it, maybe less.

Just ordered a new NTK sensor today.

[CamryDS]

Originally Posted by CamryDS

installation being done today -- very excited, will post videos of before and after for exhaust sounds.

Dood... all installed, I will have after exhaust sounds... could not get before because I didnt have time to do it.... didnt event get a lunch break due to meetings... but its loud now...

Sent from my SM-N900P
Excuse the typos
(╯°□°)╯︵ ┻━┻

[hattrickey]

Installed my header yesterday and all I can say is, this thing is awesome! I'll try and get sound clips soon.

[???]

For whoever has the header or is gonna get one but hasn't installed it yet, can you guys give us all the specs? (Weight, od, id, runner length, etc)

[hattrickey]

Originally Posted by ???

For whoever has the header or is gonna get one but hasn't installed it yet, can you guys give us all the specs? (Weight, od, id, runner length, etc)

All of that info is on the very first page of this thread

[Wayno]

This is the header that ticks all my boxes - cat, 2x O2 sensors built in, clears bash plate. Too bad shipping to Australia doubles the price. Good on you for the product though.

[etherealfall]

Originally Posted by Wayno

This is the header that ticks all my boxes - cat, 2x O2 sensors built in, clears bash plate. Too bad shipping to Australia doubles the price. Good on you for the product though.

Did you ask for a quote? Mine certainly didn't double in price

Sent from my HTC_0P6B using Tapatalk

[JaguarXJ6]

Originally Posted by hattrickey

Nice! I see you have the Perrin exhaust. Any other mods? I have full Perrin header back exhaust so I'm trying to get a feel of what mine will sound like when I get it next week.

http://www.ft86club.com/forums/showp...postcount=1962