WHAT DID YOU DO TO YOUR BRZ TODAY?

[sklimo]

Dropped her off at EFI to get suspension tightened up

[JPxM0Dz]

Originally Posted by Davesta619

Where is that USB outlet coming from out of the 4000nex? I can't tell. Did you make our stock outlet work with the aftermarket head unit? Looks like a external USB socket

Yes I'm running a USB extension with both USB and AUX input connections. I ran the cable and connector directly behind the passenger seat between the armrest and back seat. It works great for me and is nice and close by to swap out if need be. The EXT hard drive also sits on the back seat behind front passenger seat for now. Our stock outlets are not the same from Canada to US. Ours are located in the glove box, but I ran individual cables to the back of the 4000nex for USB1[Thumb Drive] and USB2[EXT HD]

[immaculate]

Originally Posted by BRZtoni

installed some toms taillight yesterday

i really want a good photoshoot now anyone in SOCAL wanna help out?
lunch is on me

Looks great. Do you have any more detailed pictures of the painted/semi-painted spats and front lip? I'm thinking of going a similar route eventually.

[BRZtoni]

Originally Posted by immaculate

Looks great. Do you have any more detailed pictures of the painted/semi-painted spats and front lip? I'm thinking of going a similar route eventually.

Yeah i can take some later

[srizzors25]

Originally Posted by Candlejack

(Yesterday, actually) but I turned this:

https://fbcdn-sphotos-d-a.akamaihd.n...84ab3c6f6021ff

into this...

https://fbcdn-sphotos-b-a.akamaihd.n...23899947_n.jpg

I'm going to put a little collar on the bottom to cover the shift lock but man do I love it. $8...already had the thread-tap

Haha wonderful I just bought one of these as well!

[JPxM0Dz]

[iamdaspoon]

Installed Invidia Catless Front pipe, Debadged, Installed Beatrush shift knob and drift button, and changed reverse lights. Been a busy two days.

Edit: sorry for sideways pics, also sorry because too lazy to fix

[kalamitykode]

Added a sticker for the horsepowers, Perrin intake, plastidipped some engine caps red. Also, not pictured, but installed the OEM-style rear diffuser.

[Kids Heart]

OFT 93oct tune
http://www.ft86club.com/forums/showthread.php?t=70796

[BirdTRD]

Made a jumper for my fuse box to give me 12V constant at the Accessory outlet in the glove compartment (will work for the center console Acc. outlet as well). I wanted to be able to run my dash cam 24/7 without cutting and splicing any wires on the car. Mission accomplished.

[Husker BRZ]

Originally Posted by BirdTRD

Made a jumper for my fuse box to give me 12V constant at the Accessory outlet in the glove compartment (will work for the center console Acc. outlet as well). I wanted to be able to run my dash cam 24/7 without cutting and splicing any wires on the car. Mission accomplished.

Won't that drain the battery down? Just curious. I installed a dashcam but haven't hardwired it yet.

[BirdTRD]

Originally Posted by Husker BRZ

Won't that drain the battery down? Just curious. I installed a dashcam but haven't hardwired it yet.

I don't think it draws too much juice, plus you can still manually turn it off or unplug it. We'll see how it goes when winter rolls around.

[kalamitykode]

My new diffusah. Well, not new, been sitting in my room for about 3 months. Just finally got around to putting it on. Now for some tips until I get a new exhaust..

[BirdTRD]

Originally Posted by iamdaspoon

Installed Invidia Catless Front pipe, Debadged, Installed Beatrush shift knob and drift button, and changed reverse lights. Been a busy two days.

Edit: sorry for sideways pics, also sorry because too lazy to fix

@iamdaspoon, PLEASE, please, please, get youself some proper jackstands! Cinderblocks are just a disaster waiting to happen. If you absolutely must use cinderblocks to support your car (or any other), turn the blocks so that they are in the same orientation as the lower block you have there (holes vertical), not like the top block (holes horizontal) because they were not designed to support a load that way. Also use a piece of wood on top to help distribute the load. I just don't want to see anyone get hurt.