Anyone else started thinking about mods already? - Page 6 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

RegisBou · 12-24-2009, 12:52 AM

I forgot...

Long Tube Equal Length Headers

Best bang for your buck after an intake IMO (midrange powaaaaaa)

Some kinda X pipe exhaust with 12" resonators and highflow cats. time to be loud and proud haha

Franisco · 12-24-2009, 01:38 AM

Quote:

Originally Posted by huddleston

1. tint - 5% all around and 15% on the windshield - i know its illegal and guys say its dangerous. i get that on other forums as well. blah blah.....

That's illegal and dangerous. Thought I'd get it this time around.

CyberFormula · 12-24-2009, 12:11 PM

the car hasn't been made yet.

Like with most cars, an extra set of rims + racing slick tires would be the mods

RegisBou · 12-24-2009, 12:32 PM

^^^^^^^^^^^

Completely agree!

16" enk's with RE-111's would be a nice alternative (95 bucks a tire if u get 4 on tirerack) So you can drive to the event warm up ur tires, set ur camber and whatnot and have a blast!

Otherwise u seem to be content on slicks :p

Ground N Pound · 01-01-2010, 11:38 PM

Most mods discussed have been performance mods or wheels. Hypothetically, if the car came out looking exactly like the concept, what cosmetic mods would you guys add, if any. I wouldn't mind a slight bumper lip of some sort. Don't think the back trunk needs anything.

S2KtoFT86 · 01-03-2010, 12:49 PM

Quote:

Originally Posted by Ground N Pound

Most mods discussed have been performance mods or wheels. Hypothetically, if the car came out looking exactly like the concept, what cosmetic mods would you guys add, if any. I wouldn't mind a slight bumper lip of some sort. Don't think the back trunk needs anything.

If Amuse picks this up, a widebody to go with my eventual GT1 S.

futureOwner · 08-01-2010, 03:20 AM

I will wait until Stillen or Borla or somebody comes out with and exhaust system and slap that on. If there is a turbo a boost controller would be nice as well as an upgraded ECU. However, the companies have to make the mods before we an buy them and I don't they will be available at the same time as the car releases.

Raiden · 08-07-2010, 05:21 AM

If the car comes out to my liking, i'm just going to try to buy the highest model possible that's within my budget and drive the car as it is.

Lexicon101 · 08-07-2010, 07:45 AM

Quote:

Originally Posted by Raiden

If the car comes out to my liking, i'm just going to try to buy the highest model possible that's within my budget and drive the car as it is.

Wow. What a lamer.
Who DOESN'T want a 3 inch exhaust and bench seat 2 feet off the top of their trunk?
I personally will be putting chrome 24s on this car.
And flames.
And racing stripes.
Flamey stripes.
.
.
.
.
And two fifteen inch subs in the back.

Raiden · 08-07-2010, 08:11 AM

maybe i'll get the car hellaflush and some fuzzy dice

on a different note i just read that one of the designers for the ft-86 decided to put red as the concept cars colour paint so it could be reminiscent of a japanese monkeys ass! hahaha...showed us the true meaning of monkey ass red! well it looks quite nice and worked out pretty well for them!

Dimman · 08-07-2010, 03:36 PM

Quote:

Originally Posted by Lexicon101

Wow. What a lamer.
Who DOESN'T want a 3 inch exhaust and bench seat 2 feet off the top of their trunk?
I personally will be putting chrome 24s on this car.
And flames.
And racing stripes.
Flamey stripes.
.
.
.
.
And two fifteen inch subs in the back.

24's you crazy? These are what you want:

PS: Are these things real???

ichitaka05 · 08-07-2010, 04:23 PM

Quote:

Originally Posted by Dimman

24's you crazy? These are what you want:

PS: Are these things real???

"That's sick!" in both cool way & horrible way.

jyoo · 08-15-2010, 06:19 AM

Assuming there is a turbo model:
1. Intake
2. Turbo Back Exhaust
3. Bigger FMIC
4. I/C Piping
5. Tune
6. Coilovers
7. Wheels
8. Tires
9. Anti-Sway Bars
10. Strut Bars

Probably a couple more things, but this is what I will be doing forsure.

ichitaka05 · 08-15-2010, 10:29 AM

Quote:

Originally Posted by jyoo

Assuming there is a turbo model:
1. Intake
2. Turbo Back Exhaust
3. Bigger FMIC
4. I/C Piping
5. Tune
6. Coilovers
7. Wheels
8. Tires
9. Anti-Sway Bars
10. Strut Bars

Probably a couple more things, but this is what I will be doing forsure.

See Dimman, I'm not the only one say "Anti-Sway bar".

Thanks jyoo!

12-24-2009, 12:52 AM	#71
RegisBou Senior Member Join Date: Nov 2009 Drives: Scion xA, Toyota MkI Mr2 (Sold) Location: Northern Virginia Posts: 171 Thanks: 1 Thanked 3 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I forgot... Long Tube Equal Length Headers Best bang for your buck after an intake IMO (midrange powaaaaaa) Some kinda X pipe exhaust with 12" resonators and highflow cats. time to be loud and proud haha

12-24-2009, 12:11 PM	#73
CyberFormula Senior Member Join Date: Dec 2009 Drives: gti, nsx, integra type r,porsche911 Location: garage Posts: 536 Thanks: 1 Thanked 17 Times in 15 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	the car hasn't been made yet. Like with most cars, an extra set of rims + racing slick tires would be the mods

12-24-2009, 12:32 PM	#74
RegisBou Senior Member Join Date: Nov 2009 Drives: Scion xA, Toyota MkI Mr2 (Sold) Location: Northern Virginia Posts: 171 Thanks: 1 Thanked 3 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	^^^^^^^^^^^ Completely agree! 16" enk's with RE-111's would be a nice alternative (95 bucks a tire if u get 4 on tirerack) So you can drive to the event warm up ur tires, set ur camber and whatnot and have a blast! Otherwise u seem to be content on slicks :p

01-01-2010, 11:38 PM	#75
Ground N Pound Member Join Date: Oct 2009 Drives: S2K Location: Bethesda Maryland Posts: 74 Thanks: 0 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Most mods discussed have been performance mods or wheels. Hypothetically, if the car came out looking exactly like the concept, what cosmetic mods would you guys add, if any. I wouldn't mind a slight bumper lip of some sort. Don't think the back trunk needs anything.

08-01-2010, 03:20 AM	#77
futureOwner Member Join Date: Aug 2010 Drives: 1990 Fairlady Z (RHD Twin Turbo) Location: Canada Posts: 25 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I will wait until Stillen or Borla or somebody comes out with and exhaust system and slap that on. If there is a turbo a boost controller would be nice as well as an upgraded ECU. However, the companies have to make the mods before we an buy them and I don't they will be available at the same time as the car releases.

08-07-2010, 05:21 AM	#78
Raiden Member Join Date: Aug 2010 Drives: 00' Audi A4 2.8 Location: Montreal Posts: 78 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	If the car comes out to my liking, i'm just going to try to buy the highest model possible that's within my budget and drive the car as it is.

08-07-2010, 08:11 AM	#80
Raiden Member Join Date: Aug 2010 Drives: 00' Audi A4 2.8 Location: Montreal Posts: 78 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	maybe i'll get the car hellaflush and some fuzzy dice on a different note i just read that one of the designers for the ft-86 decided to put red as the concept cars colour paint so it could be reminiscent of a japanese monkeys ass! hahaha...showed us the true meaning of monkey ass red! well it looks quite nice and worked out pretty well for them!

08-15-2010, 06:19 AM	#83
jyoo Member Join Date: Apr 2010 Drives: 350z Location: cerritos ca Posts: 36 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Assuming there is a turbo model: 1. Intake 2. Turbo Back Exhaust 3. Bigger FMIC 4. I/C Piping 5. Tune 6. Coilovers 7. Wheels 8. Tires 9. Anti-Sway Bars 10. Strut Bars Probably a couple more things, but this is what I will be doing forsure.

User Name		Remember Me?
Password