Best clay bar or recommendations

[sprintertrueno86]

Originally Posted by Paul_S

You are aware that your OC can be abraded off with a autoscrub sponge ? Tread lightly. You mentioned your ride had never been clayed. Why would anyone not decontaminate before applying OC 2.0 or OCP ? Once Optimum coatings are applied then only deep cleaning is needed to maintain along with either ONR or a proper power wash.

OC was done professionally and it was decontaminated before it was applied. I have never clayed the car until now.

I think claying/autoscrub sponge once a year should be safe on OC. I did use the fine grade sponge.

[Jive Turkey]

auto scrub


/thread

[voyager2285]

Originally Posted by sprintertrueno86

OC was done professionally and it was decontaminated before it was applied. I have never clayed the car until now.

I think claying/autoscrub sponge once a year should be safe on OC. I did use the fine grade sponge.

I'm in the same situation as you @sprintertrueno86. My OC was done professionally beginning of last year. Water still beads very well and I can dry my whole car with one towel, but now I'm starting to see black dots around the wheel arches (from tires???). I wanted to see if claybar can clear those up.