OpenFlash Tablet: OFT 3-Touch Programming with Preloaded Tune File Database

[Andrew025]

Is there any way to tell what version the ROM is on the OFT? Just curious if the one I received from a vendor had the latest ROM.
Don't want to flash and deal with the stupid gas pedal if I don't have to.

[steve99]

Originally Posted by Andrew025

Is there any way to tell what version the ROM is on the OFT? Just curious if the one I received from a vendor had the latest ROM.
Don't want to flash and deal with the stupid gas pedal if I don't have to.

If you open rom file with hex editor you will see the cali id in the code search for ZA1J as all calid start with this

[steve99]

Originally Posted by Target70

<-- an OFT noob.
So the tune version is the numerical value in the a01d? and any higher number would mean a newer tune..ex: a02d, a03d?

Yes except they dont always follw that sequence

Eg usa manual roms

700c
900c
A00c
A01c
B00c
B01c

Dont ask me why i didnt write the code , they are the calid,s issued by manufacturer

[steve99]

Originally Posted by Andrew025

Is there any way to tell what version the ROM is on the OFT? Just curious if the one I received from a vendor had the latest ROM.
Don't want to flash and deal with the stupid gas pedal if I don't have to.

I dont run into gas peddal issue i have flashed 40 times using oft and tactrix

Flash car
Turn off ignition
Turn on ignitio do not start do not touch gass pedal wait 20 sec
Turn off ignition
Turn onn and start do not touch gas pedal
Let idle for couple of minutes till it off cold start and rpm drop to normal idle ie 700 rpm
Turn off ignition
Restart wait for idle to go back to 700 rpm then drive note this is firt time you touch gass pedal , , no lag

[Andrew025]

Originally Posted by steve99

I dont run into gas peddal issue i have flashed 40 times using oft and tactrix

Flash car
Turn off ignition
Turn on ignitio do not start do not touch gass pedal wait 20 sec
Turn off ignition
Turn onn and start do not touch gas pedal
Let idle for couple of minutes till it off cold start and rpm drop to normal idle ie 700 rpm
Turn off ignition
Restart wait for idle to go back to 700 rpm then drive note this is firt time you touch gass pedal , , no lag

I'll give it a shot.
People were saying to do the flash, turn ignition to on and fully press the gas pedal like 8 times and then turn the car on but that has never worked for me.

[SimplePortal]

So all the OFT tunes would have the idle fix and I would not need to get my stock updated to B01D?

[Tromatic]

Originally Posted by SimplePortal

So all the OFT tunes would have the idle fix and I would not need to get my stock updated to B01D?

I would like to know as well! DI protection too?

[phrosty]

Yes, OFT tunes all have the DI seal fix. The only reason to ask dealer for an upgrade would be to protect during times you are not running an OFT OTS tune.

[Triumphrider]

So I have just ordered OFT from brz world here in Canada... What programs are going to come preloaded in the tablet? Currently I run a greddy axle back with a perrin drop in filter in my 2013 frs. I have only used shell 91 fuel as it's the only gas around here that is ethanol free.

Sent from my SGH-I317M using Tapatalk

[Target70]

I just got my OFT about 3 days ago, and from my understanding you get every map they have except for special mods like the billet power blocks or Phantom ESC. When you copy your factory tune to the OFT, it will automatically assign 5 different tune variations that are based on your current factory map. These maps are: Stage 1, Stage 2 UL, stage 2 UEL, then I think it is stage 2 UL E85, and stage 2 UEL E85.

with your current mods, I think you should run the stage 1 that it assigns when you "marry" or download your stock tune to the OFT. but as a complete noob myself, that's about all I have figured out.

[Shiv@Openflash]

Hi guys,
Just to let you know, we are working on an update that will allow us to preload up to 10 OTS maps (instead of 5) per ROM type. This would allow us to preload FI maps, Crawford PB maps, and anything else that we can think of that would be helpful to our customers. We are still several weeks away from release so don't expect the auto-udpate for a little while

Cheers,
Shiv

[solidONE]

@shiv@vishnu , Is there a reason why my flkc values are logged in values of 0 and 100? http://datazap.me/u/solidone/maft100...zoom=4700-4986

[Shiv@Openflash]

Originally Posted by solidONE

@shiv@vishnu , Is there a reason why my flkc values are logged in values of 0 and 100? http://datazap.me/u/solidone/maft100...zoom=4700-4986

FLKC isn't being logged correctly in some CAL IDs. It was a project I was working on a couple weeks ago but the whole marriage thing got things sidetracked bit. Right now I'm working on OTS v1.60 map release. After that we will get back to wrapping up some of those extra datalog channels.

Shiv

[8686]

Originally Posted by shiv@vishnu

FLKC isn't being logged correctly in some CAL IDs. It was a project I was working on a couple weeks ago but the whole marriage thing got things sidetracked bit. Right now I'm working on OTS v1.60 map release. After that we will get back to wrapping up some of those extra datalog channels.



Shiv

would really like to get some info about the new release.


Sent from my iPhone using Tapatalk