Ca-Fi Dashlinq4 Android 4.1.1 Car Stereo - WHOA BABY!

[Deathalo]

Originally Posted by milhouse

I think I tapped into as 12V I have in my trunk for my amp.

Does this mean the Orange/White wire connects just to the HU, or to the HU and lead from the Rydeen Duo? Any idea?

I believe if you tap into that orange/white wire on pin #2 with the HU "Back" wire, it triggers the HU to go into reverse mode when you shift into reverse, then it will look for a signal on your reverse video composite input. My Rydeen Duo has a red power wire branching out from the video signal, it was attached to a wire going to a harness I got from @SVXdc, which supplied it power when shifting into reverse. I didn't really pay attention too much into how it all worked but I assume the OEM HU gave it 6v Power when in reverse. If I tap into the 6v ACC power on the 16-pin harness I'm assuming the camera will get constant power with the HU on, but I still don't know why people just don't use the 12v reverse gear trigger wire for both HU triggering and Camera Power, I must be missing something?

[microbionic]

Does this support video in for an AUX source ... such as dashcam? ... or is the video in only for reverse cam...? ...

[ProTekk]

Anyone know if they have something that'll fit a '15 STI?

Sent from my SM-N900T using Tapatalk

[Deathalo]

Originally Posted by microbionic

Does this support video in for an AUX source ... such as dashcam? ... or is the video in only for reverse cam...? ...

There's more than one Video In

[milhouse]

Originally Posted by Deathalo

There's more than one Video In

I saw that too - but I didn't see a native way to view anything. Maybe it just needs an app?

[Prog]

Originally Posted by ProTekk

Anyone know if they have something that'll fit a '15 STI?

Sent from my SM-N900T using Tapatalk

http://www.ft86club.com/forums/showp...&postcount=381

[ProTekk]

Originally Posted by Prog

http://www.ft86club.com/forums/showp...&postcount=381

Whoops!

[Deathalo]

So I got it all working, I attached both the "Back" wire coming from Ca-Fi and the power wire coming from my Rear camera to one single pin and plugged that into the SWC harness with my AUX port wires. It hit's pin 2, the brown/silver wire and it every time I go into reverse, the image pops up nicely. The only other issue I encountered was that the stock brackets have 2 bumps that are supposed to line up with holes on the HU so you can line it up to the correct screw holes. It didn't seem to fit in any way where I could screw it in correctly, so I drilled out the top bump on each bracket and was able to secure all 4 screws easily. The face plate didn't go on as easy as I thought it did on stock HU, might be sticking out just a millimeter farther than it should? Oh well, it's all up and running and really nice. Oh, and my AUX port works great now after the pin swaps I made via the diagram I linked.

[Prog]

Originally Posted by Deathalo

The face plate didn't go on as easy as I thought it did on stock HU, might be sticking out just a millimeter farther than it should?

My center bezel also sticks up a tiny bit. Thought I had it mounted weird or something. Glad it's not just me.

[DC2R]

Anyone know how to remove stock GPS module?

Sent from my SM-N900T using Tapatalk

[SHIFTER]

Originally Posted by ProTekk

Anyone know if they have something that'll fit a '15 STI?

Sent from my SM-N900T using Tapatalk

This unit SHOULD - but would need fully rewired.

I could do it for a fee.

[SHIFTER]

Originally Posted by Prog

My center bezel also sticks up a tiny bit. Thought I had it mounted weird or something. Glad it's not just me.

mine fits flush.

you may have used the wrong bolt holes. The mounting bracket should be right up against the front of the unit.

[SHIFTER]

Ill throw this out there for any of you guys. If you want me to handle the wiring for you on the installation - for $20 bucks I'll wire the antenna, Aux jack, reverse camera, and have it be 100% plug and play for you without screwing around.

I'm NOT a business, but since a few of you are having issues - I just want to offer my help for anyone that needs it. All you would need to do is send me your aux adapter, antenna adapter and Ca-Fi harness. I'll turn it around in just a few days for you.

[SHIFTER]

Originally Posted by Deathalo

More research done and found this: http://i.imgur.com/hKFSVgy.jpg

So not only telling us where the reverse trigger wire is, but if you look at the bottom left 3 pins, you have the AUX left, ground, and Right pins, I think my right or left is in the ground position, so that should fix my audio problem as well.

Another thing about the reverse trigger wire, it's 12v, so I'm thinking I can use that for not just the "Back" wire going into the Ca-Fi, but also the power wire going to the camera. I will try this and let you know how it goes!

Edit: I just remembered my Rydeen Duo only requires 6v, so I guess can tap into the CA+ pin to on the 16-pin harness in that picture. If anyone else has any suggestions feel free to chime in, I'm just wingin' it right now :P

Cool - sorry guys I haven't had an opportunity to yank mine to confirm all of this yet (busy at work). Looks like you got the answers here though!