Subaru BRZ STi Style Side Skirts (ABS) - Page 20 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Vis101 · 04-20-2014, 10:45 PM

Quote:

Originally Posted by OoLong

FINALLY got everything installed. This took me a month of prepping, painting and installing...

and here is my front lip fitment solution:

Very nice. Did the exact same today for the front lip fitment solution. Down side is that I will need to paint after the fact.

Sent from my HTCONE using Tapatalk

sirsol66 · 04-20-2014, 10:50 PM

Quote:

Originally Posted by OoLong

FINALLY got everything installed. This took me a month of prepping, painting and installing...

Looks great! Would you mind posting some photos of the mounting points on the side skirt?

OoLong · 04-20-2014, 11:10 PM

Quote:

Originally Posted by Vis101

Very nice. Did the exact same today for the front lip fitment solution. Down side is that I will need to paint after the fact.

Sent from my HTCONE using Tapatalk

I am planning to do RocketBunny sometime in the future, so the front bumper is whatever for me. But yeah, I agree will need some touch up paint.

Quote:

Originally Posted by sirsol66

Looks great! Would you mind posting some photos of the mounting points on the side skirt?

Mannnnnnn, I should of taken some when it was on the lift. Maybe I can give you some decent cellphone pics some time tomorrow.

Quote:

Originally Posted by Kostamojen

Wow, looks fantastic. They should totally sell thr tS in Red after seeing how good it looks!

I totally agree!

cslntuee · 04-21-2014, 07:10 AM

Quote:

Originally Posted by OoLong

FINALLY got everything installed. This took me a month of prepping, painting and installing...

and here is my front lip fitment solution:

What kinds of rubber lip which you add under the front lip?
Thanks.

OoLong · 04-21-2014, 02:55 PM

Quote:

Originally Posted by cslntuee

What kinds of rubber lip which you add under the front lip?
Thanks.

It is an EZ-Lip my man. I use to protect the pos ABS front lip through all the scrape adventures.

cslntuee · 04-21-2014, 06:05 PM

Quote:

Originally Posted by OoLong

It is an EZ-Lip my man. I use to protect the pos ABS front lip through all the scrape adventures.

Could you share the front side image with different angle when you have

time?

Thanks. (Your car looks nice!! ^^)

OoLong · 04-21-2014, 06:13 PM

Quote:

Originally Posted by cslntuee

Could you share the front side image with different angle when you have

time?

Thanks. (Your car looks nice!! ^^)

Here is a front photo:

nunonuna · 06-03-2014, 04:00 PM

Does anyone have issue with 3m tape?
I had to use double layer on passenger side for the tape to be touched to the body and triple layer for the driver side.
After I did that, it is now solid without any gap or fitment issue.

Im happy now except the fact that I spent a lot of money on 3m tapes.

JPxM0Dz · 06-03-2014, 04:03 PM

Quote:

Originally Posted by nunonuna

Does anyone have issue with 3m tape?
I had to use double layer on passenger side for the tape to be touched to the body and triple layer for the driver side.
After I did that, it is now solid without any gap or fitment issue.

Im happy now except the fact that I spent a lot of money on 3m tapes.

Yeah this is normal, for those that didn't, I would suggest they had issues with the skirt lifting after a short time.

nunonuna · 06-03-2014, 04:13 PM

I just uploaded pix incase someone want to see raven with this kit.
Front lip, side skirt and rear spats are all from bayson r.
Attachment 80748

nunonuna · 06-03-2014, 04:24 PM

Quote:

Originally Posted by JPxM0Dz

Yeah this is normal, for those that didn't, I would suggest they had issues with the skirt lifting after a short time.

I wish I knew this before my first attempt of installing lol~
Anyway, at the end im happy

JPxM0Dz · 06-03-2014, 04:35 PM

Quote:

Originally Posted by nunonuna

I wish I knew this before my first attempt of installing lol~
Anyway, at the end im happy

Yeah I doubled the amount of 3M on my first attempt only to realize I was not making enough contact, so putting on a second layer that was flush with the weather strip was the ticket. I think this is why some guys left the weather strip off completely, not enough 3M

Andrew025 · 06-03-2014, 04:41 PM

I ended up buying some 3M tape that is a little more than double the width of the crap the kit came with. It's sticking great, the extra surface area helps a lot.

cslntuee · 06-14-2014, 03:10 AM

Quote:

Originally Posted by OoLong

It is an EZ-Lip my man. I use to protect the pos ABS front lip through all the scrape adventures.

HI,

How much further lower by EZ-Lip (width of the EZ-Lip)?

How's the adhesion of the EZ-Lip?
(I saw other product link point out some problem with EZ-Lip and bring
my concern.)
http://rhinolipusa.bigcartel.com/com...all-using-tape

http://rhinolipusa.bigcartel.com/rhi...-install-guide

http://www.ebay.com/itm/SUBARU-CUSTO...b10038&vxp=mtr

Thanks.

06-03-2014, 04:41 PM	#279
Andrew025 Senior Member Join Date: Jul 2013 Drives: Neptune GR86 Location: Portland Posts: 3,862 Thanks: 1,438 Thanked 3,505 Times in 1,806 Posts Mentioned: 60 Post(s)	I ended up buying some 3M tape that is a little more than double the width of the crap the kit came with. It's sticking great, the extra surface area helps a lot. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STi Style Carbon Fiber Front Lip/Side Skirts/Rear [BRZ]	JPxM0Dz	Cosmetic Modification (Interior/Exterior/Lighting)	31	12-03-2013 10:57 PM
CS Style Polyurethane Side Skirts	Jive Turkey	Exterior Parts (Aero, Lighting, Etc.)	14	11-04-2013 09:49 PM
WTB CHARGESPEED STYLE SIDE SKIRTS.	bahanii	Want-To-Buy Requests	1	10-18-2013 02:06 PM
FS: CS Style Side Skirts and Rear Spats	FRS2000	Exterior Parts (Aero, Lighting, Etc.)	4	09-23-2013 12:15 PM
2013 SUBARU BRZ J STYLE PU SIDE SKIRTS	JPxM0Dz	Cosmetic Modification (Interior/Exterior/Lighting)	7	05-10-2013 11:29 AM

User Name		Remember Me?
Password