WHAT DID YOU DO TO YOUR FRS TODAY? - Page 471 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Young_makaveli · 04-15-2014, 07:59 AM

Quote:

Originally Posted by AznKirby

Is this at KNS?

That's right

hoping the other jam nuts don't come loose now

N1rve · 04-15-2014, 03:34 PM

So I cleaned up my "fix" for the switch rattle.

I can say without a doubt this has significantly reduced the door rattles. Tested it out playing some heavy bass music.

If you plan to do this, the trick is to just have enough paper in there to stabilize the switch, but not too much where it sticks to the window switch.

However, there is still some panel rattle such as inside the speaker grill and somewhere near that red reflector in the door. Since I don't feel like taking my door apart...i feel this is adequate for me.

If you all have any suggestions other than stuffing paper inside feel free to let me know

Young_makaveli · 04-15-2014, 03:51 PM

Hey what are the chances of the enkei valve stem lock nut coming loose if I tightened it my hand ..I couldn't tight it anymore cause I couldn't fit 2 wrenches for the nuts.. I mean I tightened enough that it started to spin on itself

Thanks

Sent from my SM-N900W8 using Tapatalk

Young_makaveli · 04-15-2014, 06:56 PM

Hey since the shop I brought my wheels to didn't do a good job on installing my valve stems ..I was wondering if someone could tell me how to properly install them ?

It's the valve stems that came with my rpf1

Thanks

Sent from my SM-N900W8 using Tapatalk

*LongFella · 04-15-2014, 10:32 PM

Finally drove a full commute after putting Motul Gear in the trans and rear diff over the weekend.

What a difference! You really feel it and notice how smooth it is. Just amazed! Good stuff!

MikoV · 04-15-2014, 11:31 PM

Name: uploadfromtaptalk1397615439276.jpg
Views: 1747
Size: 147.1 KB

Had some rolling pictures taken while driving to six flags!

Sent from my SGH-M919 using Tapatalk

SP86 · 04-16-2014, 12:29 AM

Ordered Ccw's for her. When they go on I'll be sure to get a shoot in.

Panda Mao · 04-16-2014, 12:41 AM

the only thing I am doing currently to the FR-S is modding it in forza and driving it thats when u know your bored cause I should just drive my car in real life but nah cant get speeding tickets on xbox haha

I have just put in a new stereo hu tho

\o/ · 04-16-2014, 12:55 AM

Installed rally armor mud flaps and stalled it for the first time. Made it over a week of ownership before stalling! Not bad!

Akina's 86 · 04-16-2014, 02:52 AM

I wish I had this car already.

I am literally going insane with my weak arse Sentra....

Ammunition · 04-16-2014, 04:18 AM

My order from Japanparts arrived today - I was so stoked! I got my JDM clear side markers installed (passenger side was a huge pita to get to clip in securely), matte black Grazio & Co. fender emblems, and I started installing my SARD Racing seat covers. It was dark, and I was beat after getting the front seat covers installed - will tackle the rear ones later on in the week.

Ponwh · 04-16-2014, 07:31 AM

Quote:

Originally Posted by Ammunition

My order from Japanparts arrived today - I was so stoked! I got my JDM clear side markers installed (passenger side was a huge pita to get to clip in securely), matte black Grazio & Co. fender emblems, and I started installing my SARD Racing seat covers. It was dark, and I was beat after getting the front seat covers installed - will tackle the rear ones later on in the week.

Congrats on the shipment! Your car is the asphalt color right? It loookks nice

Pbrown · 04-16-2014, 10:54 AM

Blew away an aggressive 2006 Toyota echo this morning. Take that MF!!!

and installed HID's

mush · 04-16-2014, 11:05 AM

The seat covers look really good

04-15-2014, 03:34 PM	#6582
N1rve Senior Member Join Date: Oct 2013 Drives: 2019 BMW ///M4 Location: Los Angeles, CA Posts: 2,332 Thanks: 102 Thanked 1,167 Times in 714 Posts Mentioned: 28 Post(s) Tagged: 0 Thread(s)	So I cleaned up my "fix" for the switch rattle. I can say without a doubt this has significantly reduced the door rattles. Tested it out playing some heavy bass music. If you plan to do this, the trick is to just have enough paper in there to stabilize the switch, but not too much where it sticks to the window switch. However, there is still some panel rattle such as inside the speaker grill and somewhere near that red reflector in the door. Since I don't feel like taking my door apart...i feel this is adequate for me. If you all have any suggestions other than stuffing paper inside feel free to let me know __________________ N1rve 2019 BMW ///M4 - Alpine White \| Sakhir Orange/Black Leather \| M-DCT \| Executive Package \| 19" Black 437M Wheels \| Carbon Fiber Trim \| Sunroof \| Active Blind Spot \| Heated Steering Wheel \| Adaptive M Suspension

04-16-2014, 12:29 AM	#6587
SP86 2S Crew Join Date: Apr 2013 Drives: a 2013 FR-S Location: SoCal Posts: 601 Thanks: 528 Thanked 236 Times in 139 Posts Mentioned: 3 Post(s) Tagged: 1 Thread(s)	Ordered Ccw's for her. When they go on I'll be sure to get a shoot in. __________________ My 2013 FR-S

04-16-2014, 12:55 AM	#6589
\o/ Member Join Date: Dec 2011 Drives: 2014 WRB BRZ Location: United States Posts: 46 Thanks: 11 Thanked 15 Times in 12 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Installed rally armor mud flaps and stalled it for the first time. Made it over a week of ownership before stalling! Not bad!
$\o/ is offline$

04-16-2014, 10:54 AM	#6593
Pbrown Senior Member Join Date: Feb 2012 Drives: 2013 Scion FRS Raven Location: Ottawa Posts: 1,646 Thanks: 1,271 Thanked 1,322 Times in 658 Posts Mentioned: 106 Post(s) Tagged: 1 Thread(s)	Oh yeah baby!!!!! Blew away an aggressive 2006 Toyota echo this morning. Take that MF!!! and installed HID's Last edited by Pbrown; 04-16-2014 at 11:10 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 01:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 05:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 07:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 02:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 11:19 PM

04-15-2014, 03:51 PM	#6583
Young_makaveli Senior Member Join Date: Aug 2013 Drives: 2013 frs Location: Montreal Posts: 712 Thanks: 181 Thanked 88 Times in 77 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Hey what are the chances of the enkei valve stem lock nut coming loose if I tightened it my hand ..I couldn't tight it anymore cause I couldn't fit 2 wrenches for the nuts.. I mean I tightened enough that it started to spin on itself Thanks Sent from my SM-N900W8 using Tapatalk

04-15-2014, 06:56 PM	#6584
Young_makaveli Senior Member Join Date: Aug 2013 Drives: 2013 frs Location: Montreal Posts: 712 Thanks: 181 Thanked 88 Times in 77 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Hey since the shop I brought my wheels to didn't do a good job on installing my valve stems ..I was wondering if someone could tell me how to properly install them ? It's the valve stems that came with my rpf1 Thanks Sent from my SM-N900W8 using Tapatalk

04-15-2014, 11:31 PM	#6586
MikoV Senior Member Join Date: Feb 2014 Drives: 2014 Scion FR-S Firestorm Location: San Gabriel, CA Posts: 237 Thanks: 168 Thanked 90 Times in 56 Posts Mentioned: 5 Post(s) Tagged: 2 Thread(s)	Had some rolling pictures taken while driving to six flags! Sent from my SGH-M919 using Tapatalk

04-16-2014, 02:52 AM	#6590
Akina's 86 Junior Member Join Date: Jan 2014 Drives: 2006 Nissan Sentra 1.8 S(FR-S soon) Location: Sunland,CA Posts: 1 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I wish I had this car already. I am literally going insane with my weak arse Sentra....

04-16-2014, 04:18 AM	#6591
Ammunition Senior Member Join Date: Apr 2013 Drives: 2014 Scion FR-S Location: NW - PDX Posts: 808 Thanks: 853 Thanked 380 Times in 234 Posts Mentioned: 35 Post(s) Tagged: 4 Thread(s)	My order from Japanparts arrived today - I was so stoked! I got my JDM clear side markers installed (passenger side was a huge pita to get to clip in securely), matte black Grazio & Co. fender emblems, and I started installing my SARD Racing seat covers. It was dark, and I was beat after getting the front seat covers installed - will tackle the rear ones later on in the week.

04-16-2014, 11:05 AM	#6594
mush Senior Member Join Date: Jun 2012 Drives: 2013 FRS 10 Series #81 of 2500 Location: Houston, TX Posts: 951 Thanks: 358 Thanked 395 Times in 240 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	The seat covers look really good

User Name		Remember Me?
Password