FT-86 SpeedFactory Catted UEL Header

[Sypher]

Originally Posted by leicaboss

Damn son you got yours already!

Lol yup now just need to decide if im going to get it coated

Sent from my SAMSUNG-SGH-I337 using Tapatalk

[leicaboss]

Originally Posted by Sypher

Lol yup now just need to decide if im going to get it coated

Sent from my SAMSUNG-SGH-I337 using Tapatalk

Funny thing is I have my Nameless pipe already sigh. I wish I could take your headers hehe.

[Sypher]

Originally Posted by leicaboss

Funny thing is I have my Nameless pipe already sigh. I wish I could take your headers hehe.

Lol I wish I could take your nameless pipe

Sent from my SAMSUNG-SGH-I337 using Tapatalk

[unsurety]

Very interested to hear how this sounds as well as owner feedback with different exhaust setups. Please mention your exhaust mods when you post up videos!

[JHarperFRS]

Originally Posted by Sypher

look at what i got today. #4264. wont get installed until i get my nameless combo pipe and i'm really debating on getting the header coated.



once i get everything installed it will be FT86SF catted header<Nameless combo pipe with cat and res<FT86SF V1 CBE.

Heck yeah...getting closer to getting mine. My order number is 4269. I have a Perrin overpipe, Invidia catless front pipe, Injen intake, OFT and a Tomei 80. I had the Invidia SS N1 catback, but I've always wanted to get the Tomei 80, just didn't justify spending the money for one. I work offshore, in the Gulf of Mexico, on an Oil Rig, and the company we drill for (Chevron) gave us a $1,100 bonus. So, free money = free Tomei 80...

Sent from my SCH-I545 using Tapatalk

[JaguarXJ6]

Disconnecting the battery will not resolve this issue, but thanks for the suggestion. Adding a header will increase flow and in all likelihood run even richer.

[nunonuna]

Originally Posted by JaguarXJ6

So here is a stock tune (blue line) at 1,500mi and then the black and red after intake, Perrin overpipe, Berk catted front pipe, Perrin 2.5" resonated cat back installed at 3,000mi and dyno'ed with 3,500mi.

Your set up is very close to mine except I have invidia n1 catback.
After seeing your afr graph, I think I need tune now.

Oh and once you put header on, could you also show us how afr looks on both before and after tune?

Sent from my Galaxy Nexus using Tapatalk

[Luis_GT]

Originally Posted by JaguarXJ6

Disconnecting the battery will not resolve this issue, but thanks for the suggestion. Adding a header will increase flow and in all likelihood run even richer.

Well... I have Perrin 3" catted front pipe, Q300 catback, and KN drop in and my AFR leaned out to 12 average, I can tell you that my 3" front pipe ha a lot more flow than your berk pipe since it's larger.

OEM it was around 11.5 average

[BigFatFlip]

Originally Posted by Luis_GT

Well... I have Perrin 3" catted front pipe, Q300 catback, and KN drop in and my AFR leaned out to 12 average, I can tell you that my 3" front pipe ha a lot more flow than your berk pipe since it's larger.

OEM it was around 11.5 average

Are you saying you did the battery disconnect and it leaned out? or just that it leaned out by itself on stock tune?

[Luis_GT]

Originally Posted by BigFatFlip

Are you saying you did the battery disconnect and it leaned out? or just that it leaned out by itself on stock tune?

I disconnected the battery at some point between the install and the dyno... I didnt dyno my car till about a month after

[fooddude]

Anyone have video sound clips specifically with this setup:

This header (or similar catted uel header) + any op (oem or aftermarket) + any catless & unresonated straight fp (tomei, tanabe, blitz, borla, avo, dc, invidia, motiv) + oem midpipe and oem exhaust?? (ie: basically a full exhaust system with only 1 cat on the header, and no other cats nor resonators, except on the oem midpipe and muffler)

If anyone has this setup currently or plan to in the future..please post video clips. I would highly appreciate it

[STV3]

Originally Posted by fooddude

Anyone have video sound clips specifically with this setup:

This header (or similar catted uel header) + any op (oem or aftermarket) + any catless & unresonated straight fp (tomei, tanabe, blitz, borla, avo, dc, invidia, motiv) + oem midpipe and oem exhaust?? (ie: basically a full exhaust system with only 1 cat on the header, and no other cats nor resonators, except on the oem midpipe and muffler)

If anyone has this setup currently or plan to in the future..please post video clips. I would highly appreciate it

I believe there are some clips out there if you search. My header should be shipping to me within the next two weeks im guesstimating and I will be running this header with the stock OP and the motiv catted FP with the rest of the exhaust stock. I actually just installed my FP yesterday because I was bored lol.

[chas3wba0]

Originally Posted by fooddude

Anyone have video sound clips specifically with this setup:

This header (or similar catted uel header) + any op (oem or aftermarket) + any catless & unresonated straight fp (tomei, tanabe, blitz, borla, avo, dc, invidia, motiv) + oem midpipe and oem exhaust?? (ie: basically a full exhaust system with only 1 cat on the header, and no other cats nor resonators, except on the oem midpipe and muffler)

If anyone has this setup currently or plan to in the future..please post video clips. I would highly appreciate it

Let us know if you find one. I'm also interested in how it sounds with a catless FP

[CBR600RR]

These need to be less $$$$$$$$$$$$